2003 iveco 35c ecu question

[dermot99]

this iveco was running untill someone turned the master switch off while engine running..
it will not start now although the low pressure pump primes up. there are no injector supplies present on cranking
there is no supply to the cam sensor or the two wire sensor on top of high pressure pump this system is bosch edc 16.
earths and lives present at ecu.is the ecu goosed any opinions please:viking:

[Liteace]

Has it got a DLC, if so plug in and see what code you get

[dermot99]

thanks for your reply,it had about twenty codes which cleared but returned a code for inertia switch which does not exist

[cleevesy]

Possible that the ecu has been spiked with the voltage drop, had a couple fiats same issues , check all feeds and earths at ecu are 100 % then search for a second had ecu or new!

[ziggystardust]

fuse for position light cos on some of thoose the alarm switch of the pump ,
and sheck in the engine appartment up on the torped wall the security switch a little black thing somwhere next to the battery they use 2 ****-up

[dermot99]

replaced ecu now running again thanks