PDA

View Full Version : DDEC 60 Series Flash Files Needed



SaMirakle
25th January, 2011, 01:42 PM
Hi everyone! I was wondering if anyone out there had DDEC flash/calibration files for use with Detroit's CalTool. Also if anyone has any program files (.prg). I currently have 1 .prg file for level 5 software. I also have a small collection of various calibration files, however, I would greatly appreciate an expansion to that. Any help will be gladly rewarded with a little Paypal money but no extreme amounts.

Thanks!!!

RSwire
26th January, 2011, 12:32 AM
Hi everyone! I was wondering if anyone out there had DDEC flash/calibration files for use with Detroit's CalTool. Also if anyone has any program files (.prg). I currently have 1 .prg file for level 5 software. I also have a small collection of various calibration files, however, I would greatly appreciate an expansion to that. Any help will be gladly rewarded with a little Paypal money but no extreme amounts.

Thanks!!!


Share what you have and see if someone will share with you. Nothing on Dk is for sale! It is all free! People share freely here we do not ask for any money. But you are new here so people are reluctant to share(too many leechers) so share what you can in good faith so people feel better about sharing with you.

SaMirakle
26th January, 2011, 05:22 PM
Oh I don't mind trading flash files at all. First I just need to find someone who actually has them. You're the only person that's replied so far :(

hercamp
27th January, 2011, 03:59 AM
pull the trigger first!!
a lot of people see your thread..Im sure...but the problem is that ...here are a lot of people like you ... start a thread ..with the same format.
!if any one has this .....share and I will share mine!!!!
or a better one
!I need this ...if any one share this..xxxxx...I will share or trade xxxxx..!

or share what you have and I will share ..if I want!!!

so things do not works !!!!!!

Lickety Split
29th January, 2011, 03:26 AM
hercamp...i want to know how you got the pic of all my ex-girlfriends...LOL

Onefive
31st August, 2016, 03:50 PM
Also if anyone has any program files (.prg). Thanks!!!

SaMirakle did you ever get your .prg files? I've got some if not.

tdftruckin
12th January, 2018, 12:49 AM
I found them on MMH if anyone needs

madcash2
17th September, 2018, 05:29 PM
Hello All, does any one know how i can find out what the correct cal/flash file is for a 14 Litre ddec V Ecm. The Unit or engine number is #06R0810259. Also need to know if anyone can share the file/files with me. Would you know if the calibration with Detroit Cal tool is similar to doing it with Insite?

Thanks in Advance

roguecupcake
4th July, 2019, 02:55 AM
I found them on MMH if anyone needs

I was wondering if you still had access to the files as i've tried for days to get the prg files bt everything is either not available, mmh wont send me an invite or its a pay scam on ebay( yes i was desperate and tried that, they never gave me the password to the files)

PaulineGasse
13th November, 2019, 11:02 AM
You shouldnt have to join them. The files says .zip. Put them all in the same folder and unzip with 7zip. Right click on the first one .001 and it will extract to a joined clip

Chely81
7th April, 2023, 07:07 PM
Hola cómo estás puedes pasarme los archivos prg q tienes por favor estoy tratando de recuperar una unidad en blanco gracias mi correo es chely81@gmail.com

Chely81
7th April, 2023, 07:08 PM
Hola Ayo necesito esos archivos por favor chely81@gmail.com

AvechuchoAxel
25th May, 2023, 05:08 AM
Si escribis en español no creo que te respondan o te ayuden. En este lugar el idioma oficial es el INGLES. Muchos no te entienden y otros tantos simplemente te ignoran. Saludos

AvechuchoAxel
1st June, 2023, 05:49 AM
Does anyone have flash files for DDEC IV / III? I have to replace X28HC256 eeprom because code 53. I need to reprogram new eeprom before installation.

If I have a second working ECM it is doable to copy EEPROM meme into the new virgin one? Does it need any programming or something?

Thanks