Intake valve actuators on C13

[catfan1]

I have some 07 c13 accerts truck engines with 430hp 1550/1750 multi torque. Does anyone know of a flashfile or a way I can cut off the intalk valve actuators? I was even wondering if maybe a EURO flashfile may not use these. Im tired of the derating and IVA faults!

[trucks]

They have the 10R7302 actuator kits,they seem to fix most IVA problems

[catfan1]

Yea I tried them on two trucks that im having problems with on #6. The faults are intermident and for low current. Im going to try some new connectors for the ITVAs then I quess a internal harness. I was hoping someone knew of a way to cut them off with a different flash or something to keep them from derating.

[trucks]

1567106 are the connectors.On C15 you can put 10k ohm resistor in plug for IVA press sensor and back the adjustments out all the way.Only problem then is high compression

[ricz]

It sounds like the pigtail connector is bad, its really common on c15 iva to wear out/come loose cat sells the pigtail/connector.