Peugeot Expert 2006 dash problem with Carprog

[darius89]

Peugeot Expert 2006 dash problem with Carprog


Hi, today I hase problem with dash. I adjusted with CARPROG but still have same milage.
carprogg reads ok, adjusted and readed ok, but instaled in car and have same km as was before.
was 443233 km need 102235 km
It has 95020 inside

[blackpirate]

here:
Download peug exp 95020 102235.bin from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/5u1k0l)


but you gotta do the BSI to zerow! :P

[darius89]

Where located bsi ??? I couldnt find.
Are you sure ??? looks like bsi from 2007 year

[blackpirate]

Where located bsi ??? I couldnt find.
Are you sure ??? looks like bsi from 2007 year

donno mate!

i dont do this job!

but as we both read on this forum , if it jumps back to original, it must be BSI!

never saw one in my life!


srry, have some patience, an expert will help you for sure! ;)

cheers

[darius89]

I confused......
After rewriting dash, on car it shows old 443212 km, then I opened dash again and read, my carprog shows 102221 as you see in one dump. then installed back dash ... and it show 443212 confused.
one dump is first reading (peug expert 2006 dash 443km)
second dump is second reading (peug expert 2006 dash 102km)

[swingman26]

If there an 95020 in the dash, there is a bsi valeo with 95128, same as fiat scudo, 207....

Need to read dump with soldering some wires.

[blackpirate]

If there an 95020 in the dash, there is a bsi valeo with 95128, same as fiat scudo, 207....

Need to read dump with soldering some wires.

i think its like on 807

in BSI you must find 95128
In the BSI put FF's as shown here:
BSI type#1
0590: xx xx xx FF FF FF FF FF FF FF FF FF FF FF FF FF
05A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
05B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
05C0: FF FF FF xx xx xx xx xx xx xx xx xx xx xx xx xx
BSI type#2
04E0: xx xx xx xx xx FF FF FF FF FF FF FF FF FF FF FF
04F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0500: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0510: FF FF FF FF FF xx xx xx xx xx xx xx xx xx xx xx
BSI type#3
0580: xx xx FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0590: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
05A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
05B0: FF FF xx xx xx xx xx xx xx xx xx xx xx xx xx xx


dont ask me how to determine the type of the BSI!

[raf0468]

if this is the one with dials in middle of dash and small unit behind steering then..

bsi in driver footwell, a little awkward to get out a little patiant required...

[darius89]

Thanks friends for info, now I need bsi with 95128 soldering points

[vageric]

desolder eprom !!!

[mastaflex]

like vageric said , better to dissolder and read external and save a good dump for recovery because corrupted dump on BSI and you have a headache fixing problems