Astra F immo off

[andrassh]

Need help with Astra F immo off; x 16 szr!
ImageShack® - Online Photo and Video Hosting (http://img138.imageshack.us/i/dscn1873s.jpg/)
ImageShack® - Online Photo and Video Hosting (http://img692.imageshack.us/i/dscn1877.jpg/)
Thanks

[wojtek25]

Hi
read motorola hc11F1
send damp.

[andrassh]

upa or xprog can read?
witch one on picture?

[tomaszcz]

upa or xprog can read?
witch one on picture?

HC11F1 mask E87J

[andrassh]

Upa can't read on board! Need to lift pins?

[tomaszcz]

Upa can't read on board! Need to lift pins?

MC68HC11F1 (PLCC68):
RXD:28
TXD:29
RST:17
MODB:2 - GND
MODA:3 - GND
GND:1 - GND

[andrassh]

error on upa's second pin(TXD-29), 0,24 V Bad! I thing i shold lift some pin

[tomaszcz]

error on upa's second pin(TXD-29), 0,24 V Bad! I thing i shold lift some pin

rx and tx lift up

[andrassh]

can't read with clone upa

[tomaszcz]

can't read with clone upa

I do not try Upa. I am working on the programmer omega.

[MOBILTRONIC]

Hi,mates.Last year I presented a solution for Opel Delco red + white connector, with hc11F1,Astra F,1.6 ccm.Before reading with UPA serial or USB,should be replaced quartz 4MHz to 8MHz.Engine ECU must be connected on voltage supply.Other connections are unchanged.Immo lines at the same address as Fiat 16F engine ecu.Little to explore this topic.Best regards.

[Africa]

hello friends, i read it by upa, without unsolder any pin, the read attached.
i need help to clear immo of real worked.

(attached two files. original car, and other ecu buyed for clone for this problem).

[rafal]

here you go
disconnect immo box before plug ecu

[HeXeN]

Need original dump for HC11 E87J 16204699 HN or immo off, because my upa read via adapter is empty.

[Meat-Head]

Fill eeprom with ff see what happened

[vitorluzirao]

PASS please

[vitorluzirao]

here you go
disconnect immo box before plug ecu

Pass please