Synchro IMMO-ECU Mitsubishi Space Star 1.3

[tomlib]

Hi friends,
what equipment or interface use to synchro IMMO with ECU in Mitsubishi Space Star 1.3 2001? In ECU i have P1610 and don't start. Immo in red box with 93C56. Wiring, VCC, GND - OK.

Thanks in advance for help!

[andresfn18]

With MutII is posible to sync immo with ecu!!!

[tomlib]

and something more available? :) Mayby virgin dump to immo or ECU? T300?

[tomlib]

still actual... Please help :)

[maxcombor]

I have same proble i found tonight this file immo box virgin

[zanovo]

Read full from ECU and eeprom dump from IMMO.
I try to help you in manual synchronization !

[MACKIE]

You solve this problem ?

Regards
Mackie

[tomlib]

No, I bought ecu and immo-box+key from another car and my car started :)

[MACKIE]

I have interesting problem ....customer lost both keys and i read immo box insert dump from c56 in Zedbull and program key...After that car start for 5sec and turn off....
Now car won't start ....try to program couple pcf7935 with tmpro....zedbull...tango...and still same problem...

I even try to prepare transponder and programe with diagnostic equipment....and still nothing....try with ad100...silca original...and nothing...

Try to leave ignition for 40min and still nothing...

When connect diagnostic have one errror wrong key insert...sometimes there is no error...

Coil around lock is OK...immo seems to be ok...

Any suggestions?

Car was working fine before lost keys...

Regards
Mackie

[pablo1971]

I WOULD SAY YOU HAVE LOCKED THE IMMO ECU UP....LEAVE BATTERY CHARGER ON CAR,LEAVE IGNITION ON,AND LEAVE THE CAR LIKE THIS FOR 2 HOURS......THEN START AGAIN..