PDA

View Full Version : Audi A4 2006 erased key ...



marginal
31st January, 2011, 06:07 AM
Hello everyone.

I erased a key of that car by mistake.
I was using the Super VAG DASH K+ CAN.
I was trying to add a key, but had the only programmed key in the ignition.
So, I tried after that to add that one or the new one I had prepared without success.
I used Diagun, VAG DASH K+CAN and SBB, but no luck.
Here are the pics of the screen of the Super, Diagun and the dash with the error message: http://i74.servimg.com/u/f74/13/44/89/85/th/photo_10.jpg (http://www.servimg.com/image_preview.php?i=482&u=13448985)http://i74.servimg.com/u/f74/13/44/89/85/th/photo_11.jpg (http://www.servimg.com/image_preview.php?i=483&u=13448985) http://i74.servimg.com/u/f74/13/44/89/85/th/photo_12.jpg (http://www.servimg.com/image_preview.php?i=484&u=13448985)
Please, help ...
(http://www.servimg.com/image_preview.php?i=482&u=13448985)

lupu_sandu
31st January, 2011, 10:05 AM
This will help you:
SMOK (http://smok.com.pl/index.php?lang=pl&id=oferta&kategoria=1&produkt=6)
You try to read pin with china shit super VAG

Ashraf6119
31st January, 2011, 10:17 AM
Hi

All the Pin Codes in the picture they don't look good to me so try reading it again with T300, or Vag-Techo if you have it but I am sure even your Super VAG DASH K+ CAN could read unless you going in wrong system. If its a Diesel Car try reading it from Engine ECU....

Hope this helps.

Ash

lupu_sandu
31st January, 2011, 10:42 AM
This is RB8 dash m8 (no T300, MVP, vag tacho etc cannot read pin code). Anyway have DEF on dash.
As far as i know, this is a different procedure for learning keys on RB8 dash. Deja-Vu or Magic dash CAN can help you in this situation (for a reasonable price)

autofan1965
31st January, 2011, 01:40 PM
Best way to program key to this dash is using Vagdashcan RB8 menu and add key button. This solution work great for all immo4 cars You dont need any preprogrammad keys. When Your car is immo3(edc15 or me7 ecu) You need another solution. RB8 is dangerous dash because noone have seed key alg, only some pairs and afger 1000 acces try dash can be damaged.

marginal
31st January, 2011, 01:54 PM
How about VCDS?

autofan1965
31st January, 2011, 02:02 PM
You need first have dash in normal state. You can at least old key program back with VCDS by immo not dash. When it will be unsucessfull You need wait because dash will locked.(something like it when You put incorrect PIN 3 times but in this dash is locked too when key is not correct)

marginal
31st January, 2011, 02:12 PM
Thank you all ...

marginal
31st January, 2011, 08:09 PM
Well, it seems a trip to the dealer is on the schedule.
Not only to program the keys, but also the new instrument panel I'll have to buy, as this one has gone dead (with the "dEF." error message on it) ...
Let's pray :rolleyes:.

marginal
31st January, 2011, 08:10 PM
Well, it seems a trip to the dealer is on the schedule.
Not only to program the keys, but also the new instrument panel I'll have to buy, as this one has gone dead (with the "dEF." error message on it) ...
Here are the results from the tests:
"Monday,31,January,2011,13:20:39:46862
VCDS Version: Release 10.6.0

Address 17: Instruments Labels: 8E0-920-9xx-8EC.lbl
Control Module Part Number: 8E0 920 951 G HW: 8E0 920 951 G
Component and/or Version: KOMBI+WFS 4 H12 0110
Software Coding: 0023361
Work Shop Code: WSC 93250 999 59352
VCID: 2E580CE6864D536C
2 Faults Found

01176 - Key
008 - Implausible Signal
00003 - Control Module
014 - Defective

Advanced Identification
Serial number: 00000000000000
Identification: RB8-658
Revision: 0110
Date: 12.08.05
Manufacturer number: 1655
Test stand number: 5704
Misc.
Hardware number: 8E0 920 951 G
Immo IV Challenge: 5F F5 A6 9F
Car Info
Chassis Number: WAUDF78E06A097127
VCDS Info:
Labels: 8E0-920-9xx-8EC.lbl"

Let's pray :rolleyes:.

lupu_sandu
31st January, 2011, 09:41 PM
How much cost a new dash?
For that money you get a deja-vu interface and after finnish with Audi you still have money for a night in pub ;)



Sent from my iPhone using Tapatalk

marginal
31st January, 2011, 10:01 PM
How much cost a new dash?
For that money you get a deja-vu interface and after finnish with Audi you still have money for a night in pub ;)



Sent from my iPhone using Tapatalk
I am not sure I'll buy a new one.
But how can you be sure the interface you are talking about will do the job?

Thanks.

sjonv
31st January, 2011, 10:23 PM
what is the website from deja-vu? i like to buy the tool...

lupu_sandu
31st January, 2011, 10:29 PM
I am not sure I'll buy a new one.
But how can you be sure the interface you are talking about will do the job?
Thanks.
Thrust me will do the job without problem
Contact them on: shop@dialab.ee
PS: Check PM


what is the website from deja-vu? i like to buy the tool...
Welcome to: DeJaVu uVaJeD -> support site (http://dialab.ee/dejavu/Support/)

olo_3
3rd February, 2011, 08:24 PM
or VagDashCan > Home (http://www.vagdashcom.de/) <

milkatrek
3rd February, 2011, 08:31 PM
calc chksum :)

frikki
4th February, 2011, 10:01 PM
correct me if i am wrong someone. dejavu interface and software can only repair damaged RB4 a4 dashes. if RB8 dash is corrupted, the dash will have to be sent to them for repaires. thank you.

estlink
28th February, 2011, 07:56 PM
Actaully can we fix rb4 and rb8, right now just rb8 sw not public.
It will be soon :five:
In RB8 main problem is that comp security is destroyed and this means new transponders need to generate, bacuse engine ecu use 6 bytes comp security instead dash and transponder 12 bytes.

Ashraf6119
28th February, 2011, 08:04 PM
Hi

His Dash is KOMBI+WFS they are one of the real Sh**t Dash on Vag Cars to get the Pin Code.

And they are many times found on Golf 2000/2001.

Ash

estlink
28th February, 2011, 08:16 PM
Golf 4 RB8 is like not encypted Audi RB4 where You can read PIN code as well.
Audi A4 RB8 early version (2005 first models) use similar coding method like A4 2001-2004 encrypted, means encrypted pin what can be readed easy for key adaption procedure as well.
Pure RB8 use comp protection bytes, so PIN code pretty useless.