PDA

View Full Version : MPPS Repair



Pages : [1] 2 3

obdflasher
2nd February, 2011, 03:08 PM
Hello guys.

I looking for all symptoms.

Looking for information on mpps what happens if I run a new version with cloned cable.

After start new software firmware is reflashed.

Questions:

1. detect system cable or not ?

2. if detect what ID and PID show ?

3. what S.N. show ?

4. e.c.t.

Thank you for all informations

After answer and more info i help you how repair or update c.

bazare
2nd February, 2011, 05:13 PM
After update tool is still seen in control pannel but unusable with SN: FFFFFFFFF and if I remember ok it sais error 1.
We are waiting for the solution

ipejasinovic
2nd February, 2011, 06:10 PM
or error 13...

obdflasher
2nd February, 2011, 06:15 PM
Thnak you for info.

Than after udpate you see how much ??? FF ??

FF FF FF FF ?

1. If start new version detect mpps but ?

2. If start old version mpps ?

Sent me please few screenshoots ?

Working on solution for repair. :)


After update tool is still seen in control pannel but unusable with SN: FFFFFFFFF and if I remember ok it sais error 1.
We are waiting for the solution

obdflasher
2nd February, 2011, 06:16 PM
Serial number cloned hw is: ???

obdflasher
2nd February, 2011, 06:17 PM
What counting ?

More info need.

PN


or error 13...

bazare
2nd February, 2011, 10:21 PM
If you start any version new or old after update the serial number is: FFFFFFFF
I don't have screenshot but maybe ipejasinovici can help with that.

obdflasher
3rd February, 2011, 01:08 AM
Black list serial numbers from version 4.0.1.9

41313833
41323232
41313233
41313639
41323030
41323236
41323330
41323234

only for info.

bazare
3rd February, 2011, 01:23 PM
41323236 is not banned in 3.0.2.37 if you need a valid serial

noriginal
7th February, 2011, 02:04 PM
i have upgrade to version 3.03.38 v5.08
it is all ok
but i want return to old version 3.02.27 i can't
it is normal?
thanks

rsibiza
7th February, 2011, 04:12 PM
i have upgrade to version 3.03.38 v5.08
it is all ok
but i want return to old version 3.02.27 i can't
it is normal?
thanks

Yes...this is fully normal and also explained in some other MPPS threat.

After 3.0.2.37 it s no more alone Blacklist which destroys MPPS.

You can put ur MPPS to Bin:ciao:

ssilvviu
7th February, 2011, 09:05 PM
i have upgrade to version 3.03.38 v5.08
it is all ok
but i want return to old version 3.02.27 i can't
it is normal?
thanks

Why do you want to do that?

autosuper
7th February, 2011, 10:59 PM
What different is in 3.037 and 3.0.2.37 and 3.0.3.38 ?

se93
7th February, 2011, 11:02 PM
What different is in 3.037 and 3.0.2.37 and 3.0.3.38 ?\\

I would like to know as well

noriginal
8th February, 2011, 01:48 AM
Why do you want to do that?

no
i ask only because on other computer where i have prog in version 3.2.27 software don't see hardware and change also serial number in other number different
late i install 3.03.38 also in other pc and newly see hardware 5.08 and go perfect and now sysyem see like Amt Flash
first instead like Flashar

i ask this only for know if was normal or not:ciao:

un mio amico invece mentre aggiornava per errore ha staccato il cavo usb , la procedura si ? fermata poi quando ha inserito nuovamente l'usb dell'mpps si ? conclusa
risultato per? ? che adesso windows non lo riconosce e lo vede come sconosciuto, come lo risolve?

djbpm
10th February, 2011, 12:44 AM
Salve, io ho aggiornato il mio mpps alla versione 3.0.3.38 ed ora mi da sempre ecu non trovata.
Il seriale ?= 41323234
Qualcuno sa come ripristinarlo?

noriginal
10th February, 2011, 01:15 PM
Salve, io ho aggiornato il mio mpps alla versione 3.0.3.38 ed ora mi da sempre ecu non trovata.
Il seriale ?= 41323234
Qualcuno sa come ripristinarlo?

? molto strano, prova con un altra auto, se non hai errori e ti dovrebbe funzionare.
ma perch? l'hai aggiornato? hai deciso tu la cosa?

bazare
10th February, 2011, 03:38 PM
This is english forum.

rsibiza
10th February, 2011, 04:34 PM
Salve, io ho aggiornato il mio mpps alla versione 3.0.3.38 ed ora mi da sempre ecu non trovata.
Il seriale ?= 41323234
Qualcuno sa come ripristinarlo?

Questo e normale con una clone mpps.

Dopo v 3.0.2.37 si blocca non solo sulla visualisazione del nr seriale,e non mostra piu FFFFFFFF se il seriale del interfaccia e stato modificato nel .ini file

E poi mpps apri,sembra funzionare...ma in fatti non collega piu nessun ecu.

This is simple. After 3.0.2.37 mpps clone is not alone detected by it serial nr..so even modify serial nr of blacklistet mpps serial in .ini file will make non working mpps.

So it does not show FFFFFFFF But cannot connect anymore to any ecu.

Need redump mpps mcu to make it work 3.0.2.37

Good luck.

djbpm
10th February, 2011, 09:05 PM
Oggi ho provato su fiat 500 1.3 70cv e audi 2.0 140cv ed le ha lette e scritte, per? su una alfa 1.9 jtdm 150cv e opel corsa c 1.3 cdti 70cv non rileva la ecu, ? normale secondo voi? oppure ? colpa dell'aggiornamento software che ho fatto? vorrei capire se ho fatto casini ad aggiornare software?

djbpm
10th February, 2011, 09:05 PM
? molto strano, prova con un altra auto, se non hai errori e ti dovrebbe funzionare.
ma perch? l'hai aggiornato? hai deciso tu la cosa?

non sapevo che potevo creare danni con un aggiornamento

rsibiza
10th February, 2011, 10:39 PM
non sapevo che potevo creare danni con un aggiornamento

Please to stay in english.

Prego di scivere in inglese.

bazare
11th February, 2011, 04:21 PM
So most of us have a MPPS clone killed by 3.0.3.38 update.
Most of us need a solution to repair the tool.
From what we know till now the .exe is packed using execryptor and is difficult to extract the dump and can be done only with good cracking skills. We already have the schematics of the tool. So let's stay on topic and speak about REPAIR MPPS and how can the dump be extracted.

noriginal
11th February, 2011, 11:17 PM
Oggi ho provato su fiat 500 1.3 70cv e audi 2.0 140cv ed le ha lette e scritte, per? su una alfa 1.9 jtdm 150cv e opel corsa c 1.3 cdti 70cv non rileva la ecu, ? normale secondo voi? oppure ? colpa dell'aggiornamento software che ho fatto? vorrei capire se ho fatto casini ad aggiornare software?

if you have write and read audi 2.0 140cv and late not read alfa 147 there is problem of driver i think, if is broke can't work with a car, try to delate in System usb AmtFlash and reinstall driver. Which system of windows do you use?

se tu leggi e scrivi un audi a4(credo edc16) e poi non leggi una 147 non penso sia un problema dell'mpps perch? se ? rotto non deve fuznionare e basta. penso sia un problema di driver forse, prova a cancellare i driver in gestione sistema e reinstallali nuovamente, che sistema operativo usi scusa?

djbpm
12th February, 2011, 05:48 PM
if you have write and read audi 2.0 140cv and late not read alfa 147 there is problem of driver i think, if is broke can't work with a car, try to delate in System usb AmtFlash and reinstall driver. Which system of windows do you use?

se tu leggi e scrivi un audi a4(credo edc16) e poi non leggi una 147 non penso sia un problema dell'mpps perch? se ? rotto non deve fuznionare e basta. penso sia un problema di driver forse, prova a cancellare i driver in gestione sistema e reinstallali nuovamente, che sistema operativo usi scusa?

Uso win xp, ho provato ha reinstallare i driver e a disattivare antivirus ma niente, non identifica la 159 e la corsa, anche se sono presenti il lista del prog, strano. Poi per quanto dici non ho avuto modo di provare su una 147. Forse si dovr? impostare qualche settaggio sul prog, non saprei.

bts
26th February, 2011, 01:44 AM
Mpps version:5.08 ,
Software version:3.0.3.38 ,
seri:41323234



What is the problem?

Mickass
26th February, 2011, 05:55 PM
I am moving from version 3.2.0.19 to version 3.0.3.38 and I can no longer communicate with the ECU (Jeep Cherokee 2.8 CRD EDC16 +31) and the message "invalid key" appears in the window user information!

Do you think my clone is dead?

moky
26th February, 2011, 05:57 PM
yes if no communication,he's dead....updates kill it..

Mickass
26th February, 2011, 06:06 PM
yes if no communication,he's dead....updates kill it..

But I can read without problem informations ECU id?

Look it's my version:

moky
26th February, 2011, 06:12 PM
normaly,you can not access to ecu..i don't know your problem but....before updates all ok?

Mickass
26th February, 2011, 06:24 PM
normaly,you can not access to ecu..i don't know your problem but....before updates all ok?

No I have not tried before, I'll see another car ...
But it's a Dodge Nitro is not listed but the same engine and ECU ...

moky
26th February, 2011, 06:28 PM
possible not supported,test on supported car listed and report please but if you can have infos of ecu,normaly your clone work ..

Mickass
26th February, 2011, 06:54 PM
possible not supported,test on supported car listed and report please but if you can have infos of ecu,normaly your clone work ..

OK no problem...

macxlulu
26th February, 2011, 06:57 PM
mpps is very easy to break:) soon will begin production mpps 5.0.1.2:) clone

moky
26th February, 2011, 07:21 PM
Send us infos please when ok

Mickass
3rd March, 2011, 01:48 PM
OK no problem...


My MPPS does not work with the version v3.0.3.38!

So I installed version 4.1.4.2 v is the surprise:

- Info ECU ok
- Read ECU complete...

But when I open the file .ori on ECM2001 Winols, it is not complete? ! :banghead:

Conclusion: it is dead and I can not go back ....

Look:

rockero
3rd March, 2011, 02:30 PM
Hello please send you attach files version 4.
Thanks.

Mickass
3rd March, 2011, 09:46 PM
Hello please send you attach files version 4.
Thanks.

it's here:

Harrycz44
4th March, 2011, 11:22 PM
:banghead:I have same problem read ok but 1920 KB

soundnavigator
4th March, 2011, 11:45 PM
If you use chinese clone, this is normally. For that European is better, the German for example ( again clone, but a little better ).

Best regards.

Mickass
5th March, 2011, 08:14 AM
INFORMATION!
I fix my MPPS, I try several version of software:
- ID V4.2.1.4 ok, read ok, file incomplete as
- V3.0.3.38 not working
- V3.0.2.37 not working
- V3.0.2.19 not working

And surprise:
- ID V3.0.3.17 ok, read ok and complete file!
I tried on three cars:
* Renault Clio DCI Bosch DDCR ok (256K)
* Peugeot 406 2.2 HDI Bosch EDC15C2 ok (512K)
* Renault Espace 2.2 dCi Bosch 4 EDC15C2 ok (512K)

Now I'll try writing to confirm that its working :rock:

moky
5th March, 2011, 10:58 AM
mickass,could you test version 3.0.0.5 please?

it's version before 17


thx!

Mickass
5th March, 2011, 11:06 AM
mickass,could you test version 3.0.0.5 please?

it's version before 17


thx!

No, I do not touch nothing, I have too much trouble, sorry ...

moky
5th March, 2011, 11:16 AM
ok i understand thx

moky
5th March, 2011, 12:05 PM
did you test flash? not only read

Mickass
5th March, 2011, 02:18 PM
did you test flash? not only read

I'll try, I'll keep you informed .....

rsibiza
7th March, 2011, 07:35 PM
INFORMATION!
I fix my MPPS, I try several version of software:
- ID V4.2.1.4 ok, read ok, file incomplete as
- V3.0.3.38 not working
- V3.0.2.37 not working
- V3.0.2.19 not working

And surprise:
- ID V3.0.3.17 ok, read ok and complete file!
I tried on three cars:
* Renault Clio DCI Bosch DDCR ok (256K)
* Peugeot 406 2.2 HDI Bosch EDC15C2 ok (512K)
* Renault Espace 2.2 dCi Bosch 4 EDC15C2 ok (512K)

Now I'll try writing to confirm that its working :rock:

Tryed 2 different mpps clones with this installer without luck...ECU not found same as otheres soft too,and as aspected i think:idea:

Mickass
7th March, 2011, 08:47 PM
I'll try, I'll keep you informed .....

Ok I confirm my MPPS work in writing !

moky
7th March, 2011, 08:54 PM
You are lucky Mickass :D

moky
7th March, 2011, 08:56 PM
Tryed 2 different mpps clones with this installer without luck...ECU not found same as otheres soft too,and as aspected i think:idea:

with version 3.0.3.5 same problem? thx

montemoto
8th March, 2011, 08:16 PM
healp need soft mpps v4.1.2.4 v3.0.3.17 I kill its mpps clone of the v3.0.3.38
I do not know how to resurrect from the dead Help mpps
sorry my english
:banghead:

Mickass
8th March, 2011, 08:26 PM
healp need soft mpps v4.1.2.4 v3.0.3.17 I kill its mpps clone of the v3.0.3.38
I do not know how to resurrect from the dead Help mpps
sorry my english
:banghead:

It is Here:

montemoto
8th March, 2011, 08:45 PM
what a problem don't extract file arhive corrupt
Mpps_Setup 3.0.3.17.exe.zip (http://www.digital-kaos.co.uk/forums/attachments/f173/53518d1299612121-mpps-repair-mpps_setup-3.0.3.17.exe.zip) (5.64 MB, 0 views)http://www.digital-kaos.co.uk/forums/images/styles/digital/attach/zip.gifMpps_SetupV4.1.2.4.zip.zip (http://www.digital-kaos.co.uk/forums/attachments/f173/53519d1299612361-mpps-repair-mpps_setupv4.1.2.4.zip.zip) (5.92 MB, 0 views):egg:

rsibiza
8th March, 2011, 09:02 PM
healp need soft mpps v4.1.2.4 v3.0.3.17 I kill its mpps clone of the v3.0.3.38
I do not know how to resurrect from the dead Help mpps
sorry my english
:banghead:

I would say...u need redump mcu.

U need flasher and dump.

Good luck. :coffin:

Mickass
8th March, 2011, 09:23 PM
what a problem don't extract file arhive corrupt
Mpps_Setup 3.0.3.17.exe.zip (http://www.digital-kaos.co.uk/forums/attachments/f173/53518d1299612121-mpps-repair-mpps_setup-3.0.3.17.exe.zip) (5.64 MB, 0 views)http://www.digital-kaos.co.uk/forums/images/styles/digital/attach/zip.gifMpps_SetupV4.1.2.4.zip.zip (http://www.digital-kaos.co.uk/forums/attachments/f173/53519d1299612361-mpps-repair-mpps_setupv4.1.2.4.zip.zip) (5.92 MB, 0 views):egg:

Go to the page 3 of 4 of this post... is here.

montemoto
9th March, 2011, 10:58 AM
Hi frends work my mpps for v5.0.1.2 need update new ver.mpps 6.0.1
:idea::thrasher:

bazare
9th March, 2011, 02:33 PM
post the new version 6.0.1 ... I will make it work:thrasher:

moky
10th March, 2011, 12:07 PM
Hi frends work my mpps for v5.0.1.2 need update new ver.mpps 6.0.1
:idea::thrasher:


how you do it work ?


thanks

bazare
10th March, 2011, 02:55 PM
you buy genuine MPPS then install v 5.0.1.2 and Voila ... it works :thrasher:

8k65m
10th March, 2011, 03:02 PM
1 problem not caculate checksum for new version v5.0.1.2
How do I fix checksum
:banghead:

Hi! You can use to fix the checksum WinOls, for example. What is the serial number of your MPPS? Is it a Chinese clone?

montemoto
10th March, 2011, 03:16 PM
you buy genuine MPPS then install v 5.0.1.2 and Voila ... it works :thrasher:

did not realize a precise description of :idea:

montemoto
10th March, 2011, 03:20 PM
Hi! You can use to fix the checksum WinOls, for example. What is the serial number of your MPPS? Is it a Chinese clone?

and ECM 2001 have the same opportunity as winols

rsibiza
10th March, 2011, 06:53 PM
did not realize a precise description of :idea:


and ECM 2001 have the same opportunity as winols


If u know ALL u NEED!

WHY do U ASK?

rappttor
12th March, 2011, 11:18 PM
ECM has some options...some are good some are :) direct way to brick an ecu. let him discover for him self...

bazare
13th March, 2011, 07:08 AM
nobody understood what i meant :(

8k65m
13th March, 2011, 09:59 AM
You must be expressed clearly. Many people have problems with English.
Best regards.

bazare
13th March, 2011, 02:53 PM
I will do my best ...
If you want latest update for MPPS just buy the original!!!
Clear enough for everyone?
:eek:

rappttor
13th March, 2011, 07:06 PM
nobody understood what i meant :(

do you need some english lessons? i know a "good" teacher ! are you interested? good price also :bounce:

bazare
13th March, 2011, 07:55 PM
OK ... may I see him Wednesday at 12:00? I mean the english master!

noriginal
14th March, 2011, 05:15 PM
news?
now i test a last version on my clone

DJGonzo
15th March, 2011, 08:58 PM
INFORMATION!
I fix my MPPS, I try several version of software:
- ID V4.2.1.4 ok, read ok, file incomplete as
- V3.0.3.38 not working
- V3.0.2.37 not working
- V3.0.2.19 not working

And surprise:
- ID V3.0.3.17 ok, read ok and complete file!
I tried on three cars:
* Renault Clio DCI Bosch DDCR ok (256K)
* Peugeot 406 2.2 HDI Bosch EDC15C2 ok (512K)
* Renault Espace 2.2 dCi Bosch 4 EDC15C2 ok (512K)

Now I'll try writing to confirm that its working :rock:
Thank you sir!

Ill try it and report back with black USB box

montemoto
15th March, 2011, 09:20 PM
working with new ver5.012 , but not calculate chechsum. mpps reading , but file size not good. ( mmps give more less size )
good size is 1024 kb
bud reading size is 738 kb
:party:

sory my i english

DJGonzo
15th March, 2011, 10:23 PM
Thank you sir!

Ill try it and report back with black USB box
Not working :(

Oh well I still have my 3.0.3.38 clone :)

noriginal
16th March, 2011, 12:15 AM
i want try version 6 on my clone
please ih you have send me

noriginal
16th March, 2011, 12:21 AM
Not working :(

Oh well I still have my 3.0.3.38 clone :)


not working also with mpps with silver box
now one mpps that i have late tell me unknow usb
now is real damage:bawling:

rappttor
16th March, 2011, 08:21 PM
an so goes the last clone hero on DK...sry mate

bazare
16th March, 2011, 08:46 PM
you can see what SN are banned in each version. Some clones are not banned till 3.0.3.38 that's why those are still working.

noriginal
17th March, 2011, 03:17 PM
you can see what SN are banned in each version. Some clones are not banned till 3.0.3.38 that's why those are still working.


have try with version 6
with version 5.012 working (no ecu id)

late update to 6 no block but damage (is a china clone )

other my clone mpps work perfect again with 38:dancing:

gzk
17th March, 2011, 06:43 PM
you can see what SN are banned in each version. Some clones are not banned till 3.0.3.38 that's why those are still working.

how to do that ?

mishu_b
18th March, 2011, 08:38 AM
...
looking into software .... use WinHEX software for this.

all the best!

turcoazz
18th March, 2011, 08:54 PM
What address?

ducatisti
18th March, 2011, 10:50 PM
Why do people like the clones ? It seems people are spending hours trying to fix and make clones work . Time is money and I prefer spending my time making good tested files instead of spending years on the computer finding ways to fix a clone .

I have 2 galletto clones and both don't work . I have original tools now and wish I bought them sooner .

bazare
19th March, 2011, 01:26 PM
I have original tools and also clones ...some of my clones are working great but some don't. Guess what it's the same with original tools, some work some don't.

ducatisti
19th March, 2011, 07:29 PM
I have original tools and also clones ...some of my clones are working great but some don't. Guess what it's the same with original tools, some work some don't.

Interesting . Can you list some of the original tools that have problems .

rsibiza
19th March, 2011, 08:12 PM
Interesting . Can you list some of the original tools that have problems .


Tell me u had NEVER problem with ori Tool. U have support to solve the problem,for sure...but also problems come on ori Tools.

I use and prefer Ori Tools too,but if i buy only ori Tools i cannot live from that work.

Have Ori and Cloned Tools i a good way...

Immagine having orig CMD Flasher full and add some Byteshooter or Galetto or what ever u wanna add...

Reliable is i think one ori..and one or more clones...and always have backdoor if some clone fkucks up something,that u can recover the ecu

bazare
20th March, 2011, 01:10 AM
Original MPPS have some problems (I listed them before). On the other hand my clone galletto never failed me. NEVER!!!

ipejasinovic
20th March, 2011, 02:44 AM
Yes, once a while, I wrote about Galletto project. If protection was bad, that doesn't mean that whole project was bad. Look at FiatECUScan now! It does work over basic KKL interface and traffic can be sniffed very easily. But, does that make FiatECUScan less good?! Ofc not. Same with Galletto...

neriuks007
20th March, 2011, 12:59 PM
hi i have mpps clone with V3.0.3.17 and i can not read my audi a4 1.9tdi 81kw 1996year,how to read my audi? where is the problem?

exe123
20th March, 2011, 01:01 PM
hi i have mpps clone with V3.0.3.17 and i can not read my audi a4 1.9tdi 81kw 1996year,how to read my audi? where is the problem?

because this is a soldering job :D no OBD tool will make it

Mickass
20th March, 2011, 02:28 PM
Original MPPS have some problems (I listed them before). On the other hand my clone galletto never failed me. NEVER!!!

Where is your post with the list of problem, I break a BOSCH EDC15C2 ECU with my MPPS!!:beheaded:

rsibiza
20th March, 2011, 03:42 PM
Where is your post with the list of problem, I break a BOSCH EDC15C2 ECU with my MPPS!!:beheaded:


Break:bawling: is a hard word...what happened? Abort during writing? This is no break...Open the ECU take out the 29Fx00 an write file on external paralell programmer..,.solder back all works.

Only ECU i saw DESTOYED by serial flasher was ME7.1.1 from Golf 5 .:R32

Read by MPPS...yes the ORIGINAL MPPS,saved file,modified file...and attemp to write it back....@2% connection loose and no more connection.

No problem i think..open ECU flash 29F800 by Advantec Labtool..put back Flash to ECU,ECU in car...mount GND to Batterie...and fans start imediately again...

Tryed lot with this ECU,but no way...needet replace it..and this was one an only ever seens destroyed ECU by Serial Flasher.

Mickass
20th March, 2011, 04:48 PM
Break:bawling: is a hard word...what happened? Abort during writing? This is no break...Open the ECU take out the 29Fx00 an write file on external paralell programmer..,.solder back all works.

Only ECU i saw DESTOYED by serial flasher was ME7.1.1 from Golf 5 .:R32

Read by MPPS...yes the ORIGINAL MPPS,saved file,modified file...and attemp to write it back....@2% connection loose and no more connection.

No problem i think..open ECU flash 29F800 by Advantec Labtool..put back Flash to ECU,ECU in car...mount GND to Batterie...and fans start imediately again...

Tryed lot with this ECU,but no way...needet replace it..and this was one an only ever seens destroyed ECU by Serial Flasher.

Not break, but blocks sorry for my English ...
I boot into repair mode with my galletto!

bazare
20th March, 2011, 05:50 PM
I had many problems in OPEL ECU's. Incorect file size while reading delco lpv11 ECU 1.7dti, unable to flash EDC15M in y20dth, in edc16c39 MPPS read partial but only one data block not both of them so you can't make proper tune. Original tool was used.

rsibiza
20th March, 2011, 06:03 PM
Not break, but blocks sorry for my English ...
I boot into repair mode with my galletto!


This is nothing "deathly",only anoying ...in whorst case have to open ecu...

As i already explained...these are faults which can appear on clone and ori Tools...saying thats shit cloned tool is not thruth..

The difference between gigh quality clone tool and ori tool,is not the tool itself but the support to resolve a problem after having troubles.

I m not speaking about ME7xx EDC15 EDC16 today...i speak about resolve problems on actual ECU's where only little infos are out...u flash first EDC17 MED17 and brick it...there you gonna find BIG DIFFERENCE having Clone for less than 150 euro or some ori Tool about 5000 euro

ducatisti
20th March, 2011, 11:43 PM
interesting stuff. It seems i have yet to face many problems . I only deal with motorcycles and that has gone smoothly . Ive bricked a few ecu;s with experimentation but recovered 2 . These days i know what works with bikes .

I would like to learn about the cars. Motorbikes seem simple in comparison .

Are you guys hooking up sensors to read throttle position etc so you know what part of the map you are testing at when on the dyno .

With bikes at map at all the TPS and rpm points. This way no matter where the throttle is the AFR is good. I was told in the car world its different

Mickass
30th March, 2011, 03:51 PM
INFORMATION!
I fix my MPPS, I try several version of software:
- ID V4.2.1.4 ok, read ok, file incomplete as
- V3.0.3.38 not working
- V3.0.2.37 not working
- V3.0.2.19 not working

And surprise:
- ID V3.0.3.17 ok, read ok and complete file!
I tried on three cars:
* Renault Clio DCI Bosch DDCR ok (256K)
* Peugeot 406 2.2 HDI Bosch EDC15C2 ok (512K)
* Renault Espace 2.2 dCi Bosch 4 EDC15C2 ok (512K)

Now I'll try writing to confirm that its working :rock:


INFO

I have stability problems with the software v3.0.3.0.17 when my cable is plugged in more than 10 minutes the software crashes and indicates a hardware error ...
So bad, I could not read ALFA 159, the reading is 1 hour!

I just tried the latest version 6.0 is finally here it is blocked ....:bawling:

Mickass
30th March, 2011, 03:51 PM
INFORMATION!
I fix my MPPS, I try several version of software:
- ID V4.2.1.4 ok, read ok, file incomplete as
- V3.0.3.38 not working
- V3.0.2.37 not working
- V3.0.2.19 not working

And surprise:
- ID V3.0.3.17 ok, read ok and complete file!
I tried on three cars:
* Renault Clio DCI Bosch DDCR ok (256K)
* Peugeot 406 2.2 HDI Bosch EDC15C2 ok (512K)
* Renault Espace 2.2 dCi Bosch 4 EDC15C2 ok (512K)

Now I'll try writing to confirm that its working :rock:

I have stability problems with the software v3.0.3.17 when my cable is plugged in more than 10 minutes the software crashes and indicates a hardware error ...
So bad, I could not read ALFA 159, the reading is 1 hour!

I just tried the latest version 6.0 is finally here it is blocked ....:bawling:

moky
30th March, 2011, 05:08 PM
erf V6 ...

thanks for infos Mickass !







.

TribesMac
30th March, 2011, 07:44 PM
Mickass dont worry, you cant do Alfa 159 with that clone. There is an error in EDC16C39 checksum algorithm and you can write ECU, but the car wont start after that because of the bad checksum. At least you can write back original file and car starts again. And then you use something like galletto clone which does the job flawlessly...

johncooper85
5th April, 2011, 10:34 AM
Hi,

I have a mpps adjourned to the version 38 and it works only unfortunately in line can......someone succeeds in restoring the mpps the actual seriale it ends with 234....

I beg you an I help

Mickass
5th April, 2011, 09:57 PM
Still no solution to erase the firmware of MPPS??

bazare
6th April, 2011, 09:12 AM
There is a simple solution to erase FW of MPPS. You connect it to a programer and click on erase MCU. But then what?

mishu_b
6th April, 2011, 06:12 PM
...
you will need to reprogram also - if you would like one empty MCU you can buy one, much easier than erasing the existing MCU on the MPPS board.

atb

elchip
6th April, 2011, 07:09 PM
There is a simple solution to erase FW of MPPS. You connect it to a programer and click on erase MCU. But then what?
Then get from your HDD DUMP and program it :canabis:

Mickass
6th April, 2011, 07:25 PM
There is no erasure solution via USB?

mishu_b
6th April, 2011, 07:48 PM
...
no! only via external programmer.

atb

Mickass
7th April, 2011, 06:41 AM
I have a programmaeur external, what type of MCU contains data MPPS?
I like the desoldering and erase ...

mishu_b
7th April, 2011, 07:32 AM
...
all info are here within the forum: C8051F340 -

but after erasing what will you write in?

all the best!

bazare
7th April, 2011, 09:14 AM
...
all info are here within the forum: C8051F340 -

but after erasing what will you write in?

all the best!

Exactly ... +1
What will you write in the MCU?

Mickass
7th April, 2011, 10:28 AM
The firmawre be flashed by the software when connected via USB right?

bazare
7th April, 2011, 11:02 AM
Best joke heard in a long time. If that would work where is the cloning - protection ?

Mickass
7th April, 2011, 01:46 PM
OK I understand, I'll buy another ....

ipejasinovic
7th April, 2011, 01:53 PM
if you know how to solder small chips, you can buy just mcu...

Kfir F
7th April, 2011, 01:54 PM
Thnak you for info.

Than after udpate you see how much ??? FF ??

FF FF FF FF ?

1. If start new version detect mpps but ?

2. If start old version mpps ?

Sent me please few screenshoots ?

Working on solution for repair. :)


I have met this case before, it shows all FFFFFFFFFFFFFFFFFFF,but by BDM100, it can read out data.

I have read this data, like the one tested by mpps , it means it haven't read out the data
or the car's programmer has encryption, but BDM100 can read the cars encryption.

Mickass
7th April, 2011, 03:04 PM
if you know how to solder small chips, you can buy just mcu...

Is square or rectangle?
How many pin has it?
You have a picture?

mishu_b
7th April, 2011, 03:20 PM
...
http://icviet.com/images/detailed/C8051F340-GQ.jpg

this one, be careful it is not so easy to solder and unsolder.

all the best

Mickass
7th April, 2011, 08:29 PM
Thank you, indeed it's micro, I'll try ....

mishu_b
7th April, 2011, 08:38 PM
...
you have button for "Thanks"...
for solder and unsolder operation you will need an needle 0,3mm ... or hot air - but careful ....

atb

Mickass
7th April, 2011, 08:47 PM
To program the MCU there's:
C8051F340DK Microcontroller Development Kit (http://www.silabs.com/products/mcu/Pages/C8051F340DK.aspx)

mishu_b
8th April, 2011, 07:01 AM
...
yes,

but think about the dump/firmware what you have to write in MCU.
do you have such dump/ firmware?

atb

rsibiza
8th April, 2011, 02:48 PM
...
yes,

but think about the dump/firmware what you have to write in MCU.
do you have such dump/ firmware?

atb


Yes,was postet some time ago for free here on DK:roflmao:

rsibiza
8th April, 2011, 02:50 PM
Solder job for the C8051F340 is some 2 minutes job,so dont be scared about...

Writing is best onboard,not offboard.

scarymistake
30th April, 2011, 01:06 PM
Solder job for the C8051F340 is some 2 minutes job,so dont be scared about...

Writing is best onboard,not offboard.
how do we writng the C8051F340 onboard and how offboard
whate do we need ??
http://img832.imageshack.us/img832/4417/mppsclonelistmpps.jpg

mishu_b
30th April, 2011, 02:59 PM
...
first you need one programmer for this job
1. on board - 4 wires connected to programmer - if it knows to program on bord.
2. offboard - adapter for pprogrammer.

atb

ssilvviu
2nd May, 2011, 04:59 PM
First of all you need the flash.
Do you have it?

rsibiza
2nd May, 2011, 05:40 PM
how do we writng the C8051F340 onboard and how offboard
whate do we need ??
http://img832.imageshack.us/img832/4417/mppsclonelistmpps.jpg


You need some USB Debugger which support Silabs MCU,Silicon Labs sell one,not cheapest buit i like ori stuff:top:

Does anybody know what is U5? 16 Pin smd ic?

FastGas
3rd May, 2011, 08:17 PM
http://www.silabs.com/Support%20Documents/TechnicalDocs/C8051F34x.pdf

lolooo1981
7th May, 2011, 12:36 AM
If mpps program show FFFFFFFFFF it's erase, no ?

rsibiza
7th May, 2011, 06:11 AM
If mpps program show FFFFFFFFFF it's erase, no ?


Yes it is by Update fw....

lolooo1981
7th May, 2011, 08:48 AM
My clone 34 was dead, kill by update on official 3.38 version (Show FFFFFFFFFFF).
But with new version V5 for my 36 clone, i 'll test the firmware updater on the 34 clone dead and in ten seconds, no problem the clone work !
No need for me to disolve mcu,firmware updater work on USB....but now it's impossible to return in V3...

Mickass
7th May, 2011, 09:12 PM
My clone 34 was dead, kill by update on official 3.38 version (Show FFFFFFFFFFF).
But with new version V5 for my 36 clone, i 'll test the firmware updater on the 34 clone dead and in ten seconds, no problem the clone work !
No need for me to disolve mcu,firmware updater work on USB....but now it's impossible to return in V3...

Your file is complete or not, check me it was the same but my files were incomplete ....

ssilvviu
7th May, 2011, 09:57 PM
loolooo, try to read a file and post it here, I'm not so sure about your dead clone revival.

exxl
8th May, 2011, 07:00 PM
he car read file but after read file it will say your unit is a clone :)

and the file will be encrypted so you can nothing to with the file :)

mishu_b
8th May, 2011, 07:21 PM
...
could you upload here the file read it?
I'm really curios to see the result!!!

atb

conan981
10th May, 2011, 10:58 PM
he car read file but after read file it will say your unit is a clone :)

and the file will be encrypted so you can nothing to with the file
exists a 5.0.1 cracked version that solve this problem

exxl
11th May, 2011, 09:26 AM
with cracked software version read and write cars? :)

you must have balls :)

rsibiza
11th May, 2011, 12:18 PM
Some have...

fifas2010
11th May, 2011, 03:51 PM
exists a 5.0.1 cracked version that solve this problem


Who has this version ?
I would like test with my interface

BR

fifas):

mishu_b
11th May, 2011, 09:18 PM
...
for sure who has this version will not share by free!

also I'm looking to test on my tool.

atb

moky
12th May, 2011, 06:34 AM
dealer got it ! protected by key

bazare
12th May, 2011, 10:12 AM
what do you mean by that? Amt cartech has the cracked version?

moky
12th May, 2011, 10:46 AM
no bazare....! i just answered to fifas2010 !

moky
12th May, 2011, 12:12 PM
just ordered unit mpps 5.1,i say you news when i receive and test it.some people say me updates by soft don't work 100% fine on cars so be careful..








.

mishu_b
12th May, 2011, 01:02 PM
...
I'm looking to see you satisfaction!

atb

ipejasinovic
12th May, 2011, 03:29 PM
just ordered unit mpps 5.1,i say you news when i receive and test it.some people say me updates by soft don't work 100% fine on cars so be careful...
Hmm, as I know, many now sale v3 as v5 with cracked sw. Only one or two sellers have real v5 which is working with official software and could be updated for some time.

moky
12th May, 2011, 03:42 PM
i can install official version on it.

Metin
12th May, 2011, 05:14 PM
i have software v5.1 from cp and old clone interface
work ok, i tested on more than 10 cars

regards
Metin

bazare
12th May, 2011, 09:28 PM
the big question is ... does it do all BMW edc16c35? I don't care about 2 more renault turbo petrol added in v5 ... i want to know if edc16 BMW bug is gone.

mishu_b
13th May, 2011, 08:16 AM
...
can somebody which has this v5 clone working to confirm if is it working to read / write BMW EDC 16? (ex.E60)?

I would very appreciate your truly answer.

atb

fifas2010
13th May, 2011, 08:42 AM
dealer got it ! protected by key

Not understood what you mean by your post, I think it is out of context

scarymistake
13th May, 2011, 09:06 AM
i have software v5.1 from cp and old clone interface
work ok, i tested on more than 10 cars

regards
Metin
send us the soft V5.1
thanks

noriginal
13th May, 2011, 12:56 PM
send us the soft V5.1
thanks

have test with my european clone
read file but is incomplete
this version have more bug i think

voltage is ok but when complete the read, file have wrong dimension

noriginal
13th May, 2011, 01:01 PM
the big question is ... does it do all BMW edc16c35? I don't care about 2 more renault turbo petrol added in v5 ... i want to know if edc16 BMW bug is gone.


with my clone v5 3.0.3.38 bug don't have with this ecu BMW

bazare
13th May, 2011, 01:43 PM
I also have many type of clones, european - chinese - box - obd etc. I tested with all versions till 4.0.1.9 and with many serial numbers that are not baned. None work in all edc16c35. My original MPPS works very good with all of them. So probably you haven't tested in enough cars!

noriginal
14th May, 2011, 08:49 AM
have write bmw 530, x3, x5, 120, 330
other???

robertop
14th May, 2011, 09:52 AM
You can install the version 5 by changing the micro and flashing with the corresponding hex ... It is already proven.

noriginal
14th May, 2011, 04:38 PM
You can install the version 5 by changing the micro and flashing with the corresponding hex ... It is already proven.

only change micro? impossible reprog true?

best and more economy to use software cracked v5

i prefer my v5 with original 3.0.3.38

work can and k-line perfectly from more time and never problem:top:

mishu_b
14th May, 2011, 07:31 PM
You can install the version 5 by changing the micro and flashing with the corresponding hex ... It is already proven.


proven by who?
I can not see this info into the forum, or maybe I missed that topic!!!

atb

robertop
14th May, 2011, 10:47 PM
Is tested by peers. Again, change of micro and flashing the corresponding hex.

gizmo666
24th May, 2011, 09:35 PM
where you can buy this micro or MCU?

oep
24th May, 2011, 09:56 PM
Hey all, does anyone have schematics?
Only schematics, not dump.

thanks

ecutuners
24th May, 2011, 10:27 PM
here you go....

mishu_b
25th May, 2011, 10:16 AM
here you go....


it is just one schematic for something similar but not for MPPS.

MPPS has inside:

C8051F340
SJA1000T
LM339
74HC32
MCP255

plus quartz - means its own oscillator.

atb

vanya86
27th May, 2011, 09:02 AM
Working with no bugs. Tested on several cars.

pantadeo
27th May, 2011, 07:24 PM
Programmer for C8051F340 .

vanya86
27th May, 2011, 08:23 PM
Programmer for C8051F340 .

I know this company, i was in their office, 20? is their programmer.

And i think you are not allowed to share their work!!!!!!!

ecutuners
27th May, 2011, 08:52 PM
that device does not support c8051f340

mishu_b
28th May, 2011, 11:39 AM
...
there is needed for programming uC a special one.
you can find it on SiliconLabs web site.

atb

Shaheenem
31st May, 2011, 02:09 PM
I have problem with my MPPS clone. It is 234 chinese clone.

It was working perfectly, then i tried to install v4 software and now it doesnt work.

I re-installed V3.0.2.37 but it doesnt want to give me ECU ID, Read or write.

Serial number still displays as ....234

Im getting an error 1 & error 13 when connected.

Is there a way to fix this (I bought another one already)

mishu_b
31st May, 2011, 02:19 PM
...
error 1 = interface has not plug in to USB port
error 13 = interface has a different fw than software version required.

it it can be unlocked for which fw version you would like to have. (v3, v4, v5)

atb

gomarota
2nd June, 2011, 01:59 PM
hi mates, i bought yesterday an c8051f340 with 5.0.1.10 fw inside, i will get the debugger from silabs and see if its working, i wish is not protected, i talked with a company for read protected mcus and it cost 1400USD, so i think its better to buy a working dump

For read/write onboard:

usb debugger - microcontroller
pin4 - c2d
pin7 - c2ck
pin2.3.9 - gnd

ecutuners
2nd June, 2011, 04:35 PM
hi mates, i bought yesterday an c8051f340 with 5.0.1.10 fw inside, i will get the debugger from silabs and see if its working, i wish is not protected, i talked with a company for read protected mcus and it cost 1400USD, so i think its better to buy a working dump

For read/write onboard:

usb debugger - microcontroller
pin4 - c2d
pin7 - c2ck
pin2.3.9 - gnd

You can try to read but it but you will fail, soon as mcu is programmed it is locked, even after hw update in mpps the lock byte is protected, good luck you will need it :)
buy the dump or more mcu's is cheaper way.
Danny

xaimitu
4th June, 2011, 04:59 AM
You can try to read but it but you will fail, soon as mcu is programmed it is locked, even after hw update in mpps the lock byte is protected, good luck you will need it :)
buy the dump or more mcu's is cheaper way.
Danny

Anyone who sells or can point me to a seller of a programmed mcu for latest version is welcome to PM me :)
thanks

stevan
4th June, 2011, 10:13 AM
BeeProg can program silab ICP,anyone try it?

rsibiza
4th June, 2011, 10:50 AM
BeeProg can program silab ICP,anyone try it?


There are beeprog ISP programmers which are able to write these ones...

tehnosoftex
4th June, 2011, 11:41 AM
BeeProg can program silab ICP,anyone try it?
I did, it works very well, only 4 whires

stevan
4th June, 2011, 01:45 PM
Thanks for reply.I see in Beeprog that for RST check must add 2 resistor and condensator,so i will try to reflash

tehnosoftex
4th June, 2011, 11:36 PM
Thanks for reply.I see in Beeprog that for RST check must add 2 resistor and condensator,so i will try to reflash
No need to add anything. Just uncheck some options from device options. I power up the mcu from beeprog , only need to connect 4 wires - + C2D and C2Ck

laszlo
5th June, 2011, 08:53 AM
Must to be connected at pins 7, 11, 13 and 14 from c8051f340 ?

tehnosoftex
5th June, 2011, 10:30 AM
Must to be connected at pins 7, 11, 13 and 14 from c8051f340 ?
7, 10, 13, 14

laszlo
5th June, 2011, 11:07 AM
Thanks! Where can be found MCU bin for v5?

stevan
5th June, 2011, 11:54 AM
Only 4 wires,work tested,but dump was not ok looks a like.Because i get error that device is cloned,so i back all to old 3.....ver.

fifas2010
5th June, 2011, 04:14 PM
Hello DK's
This may be useful for someone who does not have a programmer for the MCU's famous Silabs):

BR, Fifas

bazare
5th June, 2011, 04:21 PM
Have you tested this? Is it working?

mishu_b
5th June, 2011, 06:50 PM
...
please let us know your results ... in fact only one sentence: did you find there the uC in the list?

atb

fifas2010
6th June, 2011, 03:19 PM
Hello DK's
I come once again to share my experiences with the members of this magnificent forum.
I tested the interface that I posted earlier, and now with other software, the simplest
Some members of this house can send a file to version 5.0.1.10, to test):

BR, Fifas


if this information was useful to you, press the magic buton ;)

fifas2010
6th June, 2011, 08:05 PM
Please i need a good dump 5.0.1.10 , to program and test my interface ):
http://www.digital-kaos.co.uk/forums/f173/mpps-repair-187697/index13.html#post1127168

BR,Fifas

elchip
6th June, 2011, 08:39 PM
Please i need a good dump 5.0.1.10 , to program and test my interface ):
http://www.digital-kaos.co.uk/forums/f173/mpps-repair-187697/index13.html#post1127168

BR,Fifas

Do you maybe want 3.0.2.37 ?

It is free and maybe is here on DK if you search...

:canabis:

Regard's

mishu_b
6th June, 2011, 08:42 PM
Hello DK's
I come once again to share my experiences with the members of this magnificent forum.
I tested the interface that I posted earlier, and now with other software, the simplest
Some members of this house can send a file to version 5.0.1.10, to test):

BR, Fifas


if this information was useful to you, press the magic buton ;)


my dear friend I can not see the ID of the uC, I can see only the Silabs - but not the ID C8051F340 that means from my point (let me have this point - maybe I wrong) this will not work.

atb

fifas2010
6th June, 2011, 09:12 PM
my dear friend I can not see the ID of the uC, I can see only the Silabs - but not the ID C8051F340 that means from my point (let me have this point - maybe I wrong) this will not work.

atb

OK, Maybe we should pay more attention to the post and figure
Open your eyes, I highlight to be easier to interpret
the series is C8051 , device is F340
Manuf ID: Silabs , Chip ID:..........

fifas2010
6th June, 2011, 09:14 PM
Do you maybe want 3.0.2.37 ?

It is free and maybe is here on DK if you search...

:canabis:

Regard's

OK, to test... is ok 3.0.2.37, do you have this ?
Please i need one dump to test ):

BR, Fifas

rsibiza
7th June, 2011, 07:53 AM
OK, to test... is ok 3.0.2.37, do you have this ?
Please i need one dump to test ):

BR, Fifas

The dump is here in dk,for free,in this threat...just need put your preferred serial...and done ;)

bazare
7th June, 2011, 08:38 AM
I've told him on PM the same thing ... he can try with a version posted here on DK. Mate the only thing you have to do is go back a few pages and search for it.

fifas2010
7th June, 2011, 08:39 AM
The dump is here in dk,for free,in this threat...just need put your preferred serial...and done ;)

Thank you "rsibiza!
But i cant find, where is it...??

Thank you

BR,Fifas

stevan
7th June, 2011, 08:58 AM
serial is not possiblle to change,if change ,read buttons are not active in MPPS soft

fifas2010
7th June, 2011, 09:19 AM
I see that everybody knows but nobody says where ,is secret?
Where is the dump to reflash mcu mpps with version 3.0.2.37

To all those who had the job of telling what's in this forum ... previous pages ..... where, say where, please, can not find, I have not super powers ):

BR, Fifas

Please send this dump by PM , please

conan981
7th June, 2011, 09:54 AM
should not be better post it here ??

fifas2010
7th June, 2011, 10:54 AM
should not be better post it here ??

YES, It is !!
But is secret..shuuuuuuu.

rsibiza
7th June, 2011, 03:26 PM
YES, It is !!
But is secret..shuuuuuuu.

There is no secret about.

Cracking mcu of mpps cost lot ?...
buy ori mpps send to cracker ccost lot of ?...

For sure somebody,payd more than 3500? for this,will just put it for free on forum,...so some leechers can sell it on ebay.

In forum rules i think also i had read,with new opening of garage section,it would no more be allowed post cracked sw or fw.

As i wont be banned i wont post such thing,if i have it.

Best regards.

fifas2010
7th June, 2011, 03:45 PM
There is no secret about.

Cracking mcu of mpps cost lot ?...
buy ori mpps send to cracker ccost lot of ?...

For sure somebody,payd more than 3500? for this,will just put it for free on forum,...so some leechers can sell it on ebay.

In forum rules i think also i had read,with new opening of garage section,it would no more be allowed post cracked sw or fw.

As i wont be banned i wont post such thing,if i have it.

Best regards.

Hello "rsibiza"
You are a great member off this great forum, and you know that repair a interface is not cracked sw or fw.
Only what i need is a dum to repair a mpps clone interface.

BR, Fifas

ecutuners
7th June, 2011, 11:27 PM
Hello "rsibiza"
You are a great member off this great forum, and you know that repair a interface is not cracked sw or fw.
Only what i need is a dum to repair a mpps clone interface.

BR, Fifas

The dump is an cracked hexdump so that is why it can not be posted

mishu_b
8th June, 2011, 08:08 AM
Only what i need is a dum to repair a mpps clone interface.
BR, Fifas


my friend the rules are clear for all members - NO crack sw or dumps posted into the forum section ...

I now it is painful but sometimes it is better to protect the IP.

How know maybe in the future there will be one possibility to post such thighs.

atb

fifas2010
8th June, 2011, 08:36 AM
my friend the rules are clear for all members - NO crack sw or dumps posted into the forum section ...

I now it is painful but sometimes it is better to protect the IP.

How know maybe in the future there will be one possibility to post such thighs.

atb
Thanks for the info, but i know very whell the rules !!!I see nowhere that it is forbidden to ask for help ..
Help to share a file (dump) to repair an interface, where it is written that?
Does your interpretation criterion is different from mine ...

rappttor
8th June, 2011, 08:39 AM
lets say it is a bit different, is one think to ask for help to repair an instrument cluster or an ecu, and another think to ask something like an hex code for an mpps mcu:)
although you will say its the same think we both know it is not!

fifas2010
8th June, 2011, 09:06 AM
lets say it is a bit different, is one think to ask for help to repair an instrument cluster or an ecu, and another think to ask something like an hex code for an mpps mcu:)
although you will say its the same think we both know it is not!

Dear friend, if you look well, the topic is "" MPPS Repair ""
what I intend to do is fix an interface mpps clone v 3.0.2.37 not working, so need to be repaired, it is necessary to repair a flashing mcu constant in this interface, it is necessary to dump a file in. hex. bin. . or other type of extension ....
My pretencion is repair, am I wrong in the topic? this is not the topic MPPS Repair??
I made myself clear, or do a drawing):):):

BR, FIFAs

rappttor
8th June, 2011, 09:16 AM
:))
if you are drawing as good as you explain better not !
it says "mpps repair" but serch the forum and you will see here mostly ideas sheared :)
as you are a smart guy, you came to the conclusion you have to replace/reprogram the mcu, so buy a mcu or buy an hex code, simple as that, job done! have i made my self clear or i should draw you a block scheme ?!?
unfortunately this forum forbids to sell anythink!

ps: why dont you ask amtcartech to just sell you the hex code ?

fifas2010
8th June, 2011, 09:24 AM
:))
if you are drawing as good as you explain better not !
it says "mpps repair" but serch the forum and you will see here mostly ideas sheared :)
as you are a smart guy, you came to the conclusion you have to replace/reprogram the mcu, so buy a mcu or buy an hex code, simple as that, job done! have i made my self clear or i should draw you a block scheme ?!?
unfortunately this forum forbids to sell anythink!

ps: why dont you ask amtcartech to just sell you the hex code ?

I am informed, Edmir your intelligence quotient, thanks!

gizmo666
15th June, 2011, 02:46 PM
i was looking for dump to my broken mpps but i dont find any, i check all thread, is there really working dump here for free???

Maybe someone can send pm to me so i can take a look;)

rsibiza
15th June, 2011, 04:07 PM
i was looking for dump to my broken mpps but i dont find any, i check all thread, is there really working dump here for free???

Maybe someone can send pm to me so i can take a look;)


There is no free dump in here :( no

weekdgl
21st June, 2011, 12:52 PM
I also have many type of clones, european - chinese - box - obd etc. I tested with all versions till 4.0.1.9 and with many serial numbers that are not baned. None work in all edc16c35. My original MPPS works very good with all of them. So probably you haven't tested in enough cars!
with a mpps by Igor i have READ my 535d 272hp Edc16C35 Yr.2006.
in both mode (complete or default) i read only 1mb of file, but is not a problem.
but I have a fear to writing them on Ecu, because it Says that mpps Blocking only in writing on edc16c35 bmw ;)

ecutuners
21st June, 2011, 01:02 PM
with a mpps by Igor i have READ my 535d 272hp Edc16C35 Yr.2006.
in both mode (complete or default) i read only 1mb of file, but is not a problem.
but I have a fear to writing them on Ecu, because it Says that mpps Blocking only in writing on edc16c35 bmw ;)

i have written many bmw edc16c35 without problem with original and cloned mpps

Mickass
21st June, 2011, 08:11 PM
For a BMW must have a battery voltage of about 14 volts for not having a problem writing ....

weekdgl
21st June, 2011, 09:12 PM
probabily who have blocked in writing , hasn't 14volts.
ecutuners , at how voltage have you wrote ?

ecutuners
21st June, 2011, 09:17 PM
probabily who have blocked in writing , hasn't 14volts.
ecutuners , at how voltage have you wrote ?

i have written without any extra power just the cars battery, always fine

weekdgl
21st June, 2011, 09:19 PM
clone with v37 sw or the newer V5 ?
i have the mpps cable sw37 by igor ;)

ecutuners
21st June, 2011, 09:23 PM
i have only wote with 4.0.1.9 and 5.0.1.1.0 i would suggest a newer fw in mpps for writing edc16c35 in some v3 bmw edc16 is read only, write is not active,
Danny

chupa
22nd June, 2011, 05:55 PM
after update 6.0.1
please help!!!!

weekdgl
22nd June, 2011, 06:06 PM
have you replaced the MCU?

ecutuner
22nd June, 2011, 09:01 PM
I dont think so because the screenshot i showing a blacklisted Serial!

chupa
22nd June, 2011, 09:28 PM
have you replaced the MCU?
no, where here buy?
at ebay i don't search

chupa
22nd June, 2011, 09:30 PM
I dont think so because the screenshot i showing a blacklisted Serial!
how do I fix it Wait a?
who share realties bootload?

adikk
24th June, 2011, 08:45 AM
Hello DK's
This may be useful for someone who does not have a programmer for the MCU's famous Silabs):

BR, Fifas
Pls post your connect to chip

rsibiza
24th June, 2011, 06:17 PM
after update 6.0.1
please help!!!!


U need new mcu or flash old one with good fw,the clone u used was basically 3.0.2.37....

BR. RS

scarymistake
2nd July, 2011, 01:25 PM
after update 6.0.1
please help!!!!
Can you try it and let us now

Procedure:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly interface works

DO IT AT YOUR OWN RISK!!

Before

http://img14.imageshack.us/img14/7721/afbeelding2at.png

After

http://img69.imageshack.us/img69/2289/afbeelding2k.png

lolooo1981
2nd July, 2011, 07:34 PM
Can you try it and let us now

Procedure:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly interface works

DO IT AT YOUR OWN RISK!!

Before

http://img14.imageshack.us/img14/7721/afbeelding2at.png

After

http://img69.imageshack.us/img69/2289/afbeelding2k.png

Do you make test in this version Scary mistake ?
I mean in Ecu id,read/write in some cars ?
Do you have any problem ?

Best regards

scarymistake
3rd July, 2011, 07:28 AM
Do you make test in this version Scary mistake ?
I mean in Ecu id,read/write in some cars ?
Do you have any problem ?

Best regards
Yes i read and write a picasso 16hdi bosch edc16c34
and read a xsara 16i 16v bosch me744
and went well
I can make some pictures of it tomorrow if you want ??

bmw320d
3rd July, 2011, 09:09 AM
thanks Scarymistake the update of my unit is ok, now run v.5
:beer: :top:

lolooo1981
3rd July, 2011, 09:21 AM
Finally the good cracked version is here ? :D
Dk's who want to test updaters with dead clone ?

Best regards

naruto12
3rd July, 2011, 04:07 PM
Can you try it and let us now

Procedure:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly interface works

DO IT AT YOUR OWN RISK!!

Before

http://img14.imageshack.us/img14/7721/afbeelding2at.png

After

http://img69.imageshack.us/img69/2289/afbeelding2k.png
Hi there Scarymistake, i try that on my win7 32bit, and after all the procedure, when i open after the pacth the mpps.exe it gives me an error of cant wright on setupapi.dll...Can you help me on that_?
On Xp Mod it works good
Regards

kinder
3rd July, 2011, 04:33 PM
same to me on win7 64bit :stoned:

scarymistake
3rd July, 2011, 04:41 PM
same to me on win7 64bit :stoned:
i have only win xp
try dis
install program (from me)
1. delete original file "Mpps.Exe" from inst directory
2. extract then rename the attached file to mpps.exe and copy it to the inst directory
3. run FirmwareUpdate.Exe then MppsUpdate.exe


DO IT AT YOUR OWN RISK!! :roflmao:

and let us now but i only test it on win xp sp3

lolooo1981
3rd July, 2011, 05:09 PM
Hi there Scarymistake, i try that on my win7 32bit, and after all the procedure, when i open after the pacth the mpps.exe it gives me an error of cant wright on setupapi.dll...Can you help me on that_?
On Xp Mod it works good
Regards

If you want to run in Win7 you need another version..
Maybe V8 :D

Best regards

naruto12
3rd July, 2011, 07:17 PM
If you want to run in Win7 you need another version..
Maybe V8 :D

Best regards
Alwayes work on win7 without problem ;)

naruto12
3rd July, 2011, 07:23 PM
i have only win xp
try dis
install program (from me)
1. delete original file "Mpps.Exe" from inst directory
2. extract then rename the attached file to mpps.exe and copy it to the inst directory
3. run FirmwareUpdate.Exe then MppsUpdate.exe


DO IT AT YOUR OWN RISK!! :roflmao:

and let us now but i only test it on win xp sp3

The same error :(, and now i not able to firmware update, device not found... :(

But in xp mod works good...but dont work firmware updat too

Regards

lolooo1981
3rd July, 2011, 07:45 PM
I think good tuners work only winXP or Win 2000.
Win7 is not the best choice.
Best regards

athlonxp
3rd July, 2011, 08:22 PM
Can you try it and let us now

Procedure:
1. Install MPPS V5.0.1.10
2. Run Patch MPPS V5.0.1.10 Patch
3. Put in the usb (from interface)and run FirmwareUpdate.Exe then MppsUpdate.exe
4. Finaly interface works

DO IT AT YOUR OWN RISK!!

Before

http://img14.imageshack.us/img14/7721/afbeelding2at.png

After

http://img69.imageshack.us/img69/2289/afbeelding2k.png

Tested with ..234 clone. Works perfect. Thanks

naruto12
3rd July, 2011, 10:31 PM
I think good tuners work only winXP or Win 2000.
Win7 is not the best choice.
Best regards

LOL, at this moment win7 works in a lot of programs, win xp, yes its nice i have in 2 desktop, in other i have win7 and no problem reprograming and modifying files.
And something exists like win xp virtual..and works on win7...dont say win7 its bad if you dont know his potencialy.
And you are saying that the people who works with a win7 its bad tunner?!!

Best regards

ssilvviu
4th July, 2011, 07:35 AM
Dk's who want to test updaters with dead clone ?


I made a test, but no success.

weekdgl
4th July, 2011, 09:03 AM
i have a friend with this problem...(dll problem).
with Xp it open and seems that is OK.
the flashing must be do only 1 time in the pc that will used, or it must be flash on every PC that will should be used?

naruto12
4th July, 2011, 10:29 AM
i have a friend with this problem...(dll problem).
with Xp it open and seems that is OK.
the flashing must be do only 1 time in the pc that will used, or it must be flash on every PC that will should be used?
hi there i think you only flash one time, i have tested on other computer and works fine for me :) about the .dll i think its some problem with permissions of windows 7...:)


Regards

benzerrouki
4th July, 2011, 10:31 AM
Tested with ..234 clone. Works perfect. Thanks

Hi athlonxp i have MPPS clone does it work with this version i join an image of mine

weekdgl
4th July, 2011, 10:40 AM
when i switch in other computer it need the Flashing again?

athlonxp
4th July, 2011, 10:45 AM
Hi athlonxp i have MPPS clone does it work with this version i join an image of mine
The same is mine (silver box)

benzerrouki
4th July, 2011, 10:48 AM
The same is mine (silver box)


Thanks mate i gonna flashing mine and report this afternoon

lolooo1981
4th July, 2011, 11:18 AM
when i switch in other computer it need the Flashing again?

No you no need to reflash because firmware is already updated.
The updaters detect nothing now.

Best regards

lolooo1981
4th July, 2011, 11:21 AM
Hi athlonxp i have MPPS clone does it work with this version i join an image of mine

I have same and running now in V8.2.10

Best regards

lolooo1981
4th July, 2011, 11:56 AM
For win7 i always run software like administrator.

Best regards

scarymistake
4th July, 2011, 12:08 PM
I have same and running now in V8.2.10

Best regards
do you have a clone runing V8.2.10 ?????

egyclick
4th July, 2011, 12:10 PM
do you have a clone runing V8.2.10 ?????

probably he uses a new MCU as they are available on ebay but a software solution would also be good

lolooo1981
4th July, 2011, 12:25 PM
probably he uses a new MCU as they are available on ebay but a software solution would also be good

New MCU for V8 yes,But not on Ebay (Too expensive).Run with official software.
And one V5 with cracked version who work fine (on 7 and xp)
Also yes its to be good, but i prefer work with official version.

Best regards