Peugeot 308 BSI

[TULGEYWOODMAN]

I am looking for a virgin dump for 2007 peugeot 308 BSI


OR does anyone know the locations for the pin code?
I have the pin code, just need the second location .

[lupu_sandu]

What is PIN? (maybe UFA7)
VIN is VF34CRHRH55005509?

[TULGEYWOODMAN]

Yes, correct, have one location of pin no, second location was corrupted, was after confirmation .
thankou for replying

[Wolfster]

How was it corrupted? BSI via OBD using dp3 maybe?

Info. May help someone in future.

[T72]

How was it corrupted? BSI via OBD using dp3 maybe?

Info. May help someone in future.

yesterday I have did 308(valeo) bsi by OBD with dp3, all ok, flashing 10min. onlly, but JonsonControls 30min.... :hello:

[TULGEYWOODMAN]

No it was corrupted with enigma.
READING !!!!! [second time I have done this, doh]
A scudo last year [same bsi]

Noted today that enigma pdf only uses 6 wires, pin 3 omitted, if you use the pin 3 wire from dp3 pdf, it works ok!
BUT

You should always read and save with upa first, then programme with dp3 enigma etc after, IF you want to be 100% safe
I f you buy the upa adapters from a man up North [Arthur]its a breeze, this lets you read in circuit with upa also lets you use the dp3 etc probe on the upa.
sorted now with virgin dataset and planet and help

[vageric]

you have pdf from enigma en dp3 to share with me ????
done already a couple of but always have to remove eprom.
want to read with upa like you suggest first.

[Digamax]

No it was corrupted with enigma.
READING !!!!! [second time I have done this, doh]
A scudo last year [same bsi]

Noted today that enigma pdf only uses 6 wires, pin 3 omitted, if you use the pin 3 wire from dp3 pdf, it works ok!
BUT

You should always read and save with upa first, then programme with dp3 enigma etc after, IF you want to be 100% safe
I f you buy the upa adapters from a man up North [Arthur]its a breeze, this lets you read in circuit with upa also lets you use the dp3 etc probe on the upa.
sorted now with virgin dataset and planet and help
Hi, I done about 30 BSI of p308 with Enigma without any problem. Which voltage you use for this BSI? I think that you use to low voltage.

best regards
Vladimir

[motorsport]

No it was corrupted with enigma.
READING !!!!! [second time I have done this, doh]
A scudo last year [same bsi]

Noted today that enigma pdf only uses 6 wires, pin 3 omitted, if you use the pin 3 wire from dp3 pdf, it works ok!
BUT

You should always read and save with upa first, then programme with dp3 enigma etc after, IF you want to be 100% safe
I f you buy the upa adapters from a man up North [Arthur]its a breeze, this lets you read in circuit with upa also lets you use the dp3 etc probe on the upa.
sorted now with virgin dataset and planet and help

the new version enigma have many bug but old year work well

[Rito]

the new version enigma have many bug but old year work well


What version you talk??

Or you talk last update??

[Digamax]

you have pdf from enigma en dp3 to share with me ????
done already a couple of but always have to remove eprom.
want to read with upa like you suggest first.
Hi, this is Enigma PDF for P308 BSI.

Best regards
Vladimir

[eagleone-two]

Hi!
What is inside eprom? Which one 95128?
Regards

[Digamax]

Hi!
What is inside eprom? Which one 95128?
Regards
Hi, yes inside is 95128.

[TULGEYWOODMAN]

I was alway advised by reseller of enigma to use 5volts highest setting, interesting you quote 3 volts.

Wire for pin 3 is omitted on enigma
my Enigma has always struggled to read and programme the solder connected bsi`s I usually read with upa, and save, then connect to enigma using MILESBETTER magic adapters.

[Digamax]

I was alway advised by reseller of enigma to use 5volts highest setting, interesting you quote 3 volts.

Wire for pin 3 is omitted on enigma
my Enigma has always struggled to read and programme the solder connected bsi`s I usually read with upa, and save, then connect to enigma using MILESBETTER magic adapters.
For this BSI I use 4V with Enigma. Never have problem.
Only problem that I notice when read/write on soldering points with Enigma is with dash of Citroen C5 2009. I can read but cant write. Always get verification error.
When I read desoldered eeprom I use 4.5V.
In this case 4V is not good.

best regards
Vladimir

[TULGEYWOODMAN]

But you use low voltage on 308?
By this I assume you use only 1.8 volts [which is low setting on enigma]
I am amazed that a 95128 will read via solder points at 1.8 volts, but if you say you have done 30 of them at 1.8 volts I will try it on the next one

[Wolfster]

Stick to 4+ Volts mate, these guys seem to be defying the the manufacturer technical specifications of the said eeprom ;-)

[Digamax]

But you use low voltage on 308?
By this I assume you use only 1.8 volts [which is low setting on enigma]
I am amazed that a 95128 will read via solder points at 1.8 volts, but if you say you have done 30 of them at 1.8 volts I will try it on the next one
I dont now what I you talking about? I sad 4 V not 1.8 V.

[newgeniehex]

Hi, this is Enigma PDF for P308 BSI.

Best regards
Vladimir
HELLO
The BSI is same of peugeot 207!!
you can read the eeprom in circuit whithout problem!!!
look my picture!!!

[Digamax]

HELLO
The BSI is same of peugeot 207!!
you can read the eeprom in circuit whithout problem!!!
look my picture!!!
Yes, also Citroen C3 after 2006 have the same BSI.

Best regards
Vladimir