Renault Trafic 5P08 immo off

[florinyes]

Actualy is a Nissan Primastar but same shit..

Bosch 0281 011 529 EDC15

Can someone do immo off on it? Just immo of not virgin..Can it be done?
Had a go with cartool but deletes chasis number not good to me..

If not doable as I've read can I get the pin code of the 5p08 or where from?

Cheers

[florinyes]

Dump uploaded if anyone wants to have a look at it.

Regards

[bricolo]

Hi
on this ecu, only immo clear, if you want immo off
you must use emulator.
But if on car immo is good, make a clear and it will
be recode when you'll turn ignition on. Use immo killer.
For Pin code, read UCH

[florinyes]

Hi mate

Can you please check if this dump is fine?

Regards

[bricolo]

yes it is good clear so you can use emulator or put
ecu with this dump in your car and when you'll turn
on ignition it'll take car immo

[Meat-Head]

yeah, agree the word on the street also says no immo off.

Have a look on Ebay beleive it or not for emulaters

[florinyes]

Thanks guys

I'll let you know the outcome

Regards

[florinyes]

Hi guys

Am I doing something wrong?

Written the above file on 5p08, soldered emulator wires as per tek tronics instructions.. +ive pin M2 con B, immo G2 con A, ground L3 con B. Still non start.. lifted pin G2 conA

Only fault codes glow plugs under engine and coil reader under imobiliser..

Anyone got a pic with wiring soldering on this ecu? Attached tek tronics pdf.

Cheers

PS. this is a 3 plug ecu..

[lupu_sandu]

Try this m8:

[florinyes]

Pics with the ecu attached

[damih]

Hello,the ecu in a picture is looks EDC 16 ??

[florinyes]

Indeed looks like edc16..has a 29f400 flash and bdm ports..

[damih]

Sorry i never see EDC 15 with silicone ?? and aluminium body like this ???
mayby Im wrong

[florinyes]

Guys

give up on this..car too far away and allready been at it few times and no good..

[Meat-Head]

give up on this..car too far away

This is why at M-H-M we ALWAYS insist the vechile comes to us as a non starter.

Only time we go out if it really is local, max 5 miles, if get no where after 1 hour, "get it in by hook or truck, or you can go ~~~~ off"

Can you get the vechie posted across to your shop?
worth doing if nobody else in that area it is located can do it.

how much was emulater?
try cutting the purple/white twisted pair
how long for emulater to download?
try uploading the ecu to ECU Repairs Nottingham,-ECU Decoding Nottingham/ECU Decode Services Nottingham - Bluehawk Electronics Nottingham, - ECU Repair Immobiliser Bypass Nottigham, A class Mass airflow meter Repairs, New Bosch EDC16 , Bosch ME7.6.2,Delco-Delphi MT35E, Delco (http://www.bluehawkelectronics.co.uk) (search it)
nottingham

[florinyes]

Hello mate

Emulator from here:Immobiliser Repair Renault immo emulator (http://www.tek-tronics.co.uk/product_info.php?cPath=33&products_id=80)

There's no purple white wires..

Not sure I am with you on downloading the emulator?

As I can't get the van in won't waste any more time on it.

Shame I can't get it in to get to the bottom of it.

Thanks everyone for helping.

Regards

[stormb]

Hi!I have same problem with same car.Could you send me pass for Reno.rar attachment?Thanks.

[florinyes]

Before you try doing immo off check wiring from ECU to bulkhead..Quite common wiring on this..

[stormb]

Checked,everythink is ok.Car not start,with emulator too.Problem is in UCH-don't communicate with transponders antena modul...

[florinyes]

If yours is same as the one I had most likely no immo off solution yet..

[kos004]

Try this m8:

pls. Pass for Reno.rar

[Meat-Head]

pls. Pass for Reno.rar

dunno but thanksssss for bumping this thread was unable to find it the other week.

[azoki981]

hi! When the ignition is switched on after immo cleaning, does the car automatically learn the immo code again? Do you need a diagnostic tool?Is it not possible without reading the UCH PIN?