Key Learn on Polo 1.9D

[vivendi]

Hello all members in this nice forum,
I have problem with one immobiliser on VW Polo 1.9D
The immobiliser number is: 6X0 953 257
I have the login code on this immobiliser and like to make only 2 keys for it. I connect it with VAG-COM and read in internet
- http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Key_Matching_(Separate) -
but havent result.
I paste the login code in VAG-COM, go to Adaptation chanell 01 or 21 - write me error...
Can Somebody to say me how can make key learning wirh VAG-COM and this immobiliser ?

Best Reggards All

[frikki]

hi there. i have also have struggled a few times with this specific immo box. it uses a valeo box. to get the pin code is very easy. apparently one has to use a zedd bull to prepair a transponder for the immo box. i do not know if this is the only solution to this. i could never get these cars using this immo system started. it will be appreciagted if someone could shedd some light on this. thanks.

[vivendi]

Hello,
I read EEprom in the immo box and callcolate the login code it is:
33xx in VAG-COM I paste 033xx. (This xx is digit, and dont write it for secutiy).

[autofan1965]

Have You id44 Transponder? New not used?

[Ashraf6119]

Hi

1) Are you sure the pin code you using is the right one.
2) Also the Transponder Chip you using is right one.
3) When using Vag-Com Tool you got to remember if your pin code is 1234.......you got to start with zero first....01234...that's how Vag-Com works.........any other tool will Accept 1234...but not Vag-Com.

Hope this helps.

Ash

[vivendi]

Hello,
I'm sure that this is my login code, becouse when I write in VAG-COM tool other login code (for example 02345) say me massage that this code is incorrect. When paste my code that I reed from the EEprom in the immobiliser modul in VAG-COM it nothing say me.
Only channel 00 for factory reset it valid and chanell 50 is valid. The immobiliser havent fault codes! I like to add 3 keys or 2 keys and the immobiliser to programm it.

[autofan1965]

From where You have this key? Are new? What transponder inside?

[vivendi]

I read EEprom 24C04 inside the immobiliser box. I calcolate this dump from eeprom with immo code calcolator for VAG. it say me: 33xx.
This immobiliser box is used I unmount from VW Polo and change it with emulator. And now I have this box and like to make it keys to make it in packet. This immo works fine, but havent to make it keys.

[autofan1965]

Question is:
Have You new keys/transponders?! Or You try program used?

You try make it on table or in car?

[vivendi]

I have one bag with used transponders :) maybe 10-15 pcs :) I dont know what model use in this immo... I have glass trg and PCFxxxx tags

[frikki]

in my country this vehicle comes with tp14 transponder chip. immo 3.

[autofan1965]

id44 I think You need virgin id44, used is locked.

[Ashraf6119]

I have one bag with used transponders :) maybe 10-15 pcs :) I dont know what model use in this immo... I have glass trg and PCFxxxx tags


hi

That is where your problem is get the new transponder and try to program again........

Ash