PDA

View Full Version : clio2 '04 program used key???



dimss89
5th February, 2011, 03:20 PM
does clio 2 can programd with clip used key??

albertros
5th February, 2011, 03:30 PM
Hi,
no.
Not with any equiment.
Must replace pcf7946

immokill
5th February, 2011, 03:50 PM
Hi,
no.
Not with any equiment.
Must replace pcf7946


100% true.



Regards

dimss89
5th February, 2011, 04:34 PM
so.... if i repaices with a new pcf7946 clip must programed right??

dimss89
5th February, 2011, 04:34 PM
so.... if i replace with a new pcf7946 clip must programed right??

albertros
5th February, 2011, 06:05 PM
Hi,
replace pcf7946 wuth a new one, format the chip for use in a clio.

Use tool to program to car, if Clip you will need 12 dig code.

damih
5th February, 2011, 06:20 PM
Hello,you need to do
1)remplace PCF7946 with a new one
2)precode a chip ID 46 renault (with key progammer)
3)program a key with PIN code via OBD (sbb,t300,ect)

PierreTheron
6th February, 2011, 09:02 PM
Hi

Where do you get these pcf 7946 chips from.

Can Zedbull clone precode these???
Can Zedbull clone give pincode from uch.

What will this cable do ???
Renault PIN Code reading Key programming (http://www.autokmfactory.com/Car_Key_Programmer/101161865493.html)

Thanks in advance..

Rito
7th February, 2011, 12:33 AM
Hi

Where do you get these pcf 7946 chips from.

Can Zedbull clone precode these???
Can Zedbull clone give pincode from uch.

What will this cable do ???
Renault PIN Code reading Key programming (http://www.autokmfactory.com/Car_Key_Programmer/101161865493.html)

Thanks in advance..

Yes Zed-Bull can do it...

damih
7th February, 2011, 01:00 PM
Hello,Pierre yes zed-bull do it and for PCF7946 you can buy to hickley,ebay ect...
and for this cable you can use it only with megane and scenic years 2000 until 2002 i think
and you need use crypto 60

alfabit
7th February, 2011, 01:31 PM
does clio 2 can programd with clip used key??

You didn`t mention if is a key owned by that car or is a key used in other car ! Maybe you can tell us that for avoiding misunderstandings.

You can (re)program very simple a key if that key owns to that car, it`s the car`s key and it is only erased from UCH ( usual to Renos ).

If the key was used, programmed to other car, you apply the advices written above ( zedbull, sbb, t300 and so on )

PierreTheron
7th February, 2011, 05:25 PM
Hi

Another question i have.....( Sorry for bumping this thread but i think it is relevant to understand how these keys work)

A) Clio 1 with uch BMNT N2 with 93c46.

Is this key precoded and ordered from factory or can you buy blank RF key and code to car if you have pin code???


B) Clio 2 with UCH-N3, UCH-BG UCH-N2 with 93c66.

For this you can buy blank RF Key and code to car if you have pin code ????


C) Megane1 with infra red key and mcu in uch.


For this you must order precoded key from factory??


Thanks

Pierre:puke:

damih
7th February, 2011, 05:55 PM
Alors,
first clio 1 ID33 no need to precode it because don't work with a remote
seconde clio 2 you need to precode it (if you change a PCF 7946 blank)because it work with remote
and a last sorry i don't now for a remote i now carprog do ti

alfabit
7th February, 2011, 07:18 PM
Hi

Another question i have.....( Sorry for bumping this thread but i think it is relevant to understand how these keys work)

A) Clio 1 with uch BMNT N2 with 93c46.

Is this key precoded and ordered from factory or can you buy blank RF key and code to car if you have pin code???


B) Clio 2 with UCH-N3, UCH-BG UCH-N2 with 93c66.

For this you can buy blank RF Key and code to car if you have pin code ????


C) Megane1 with infra red key and mcu in uch.


For this you must order precoded key from factory??


Thanks

Pierre:puke:

In my country we find Renault - Dacia - Logan precoded ID46 ( Renault ), cards for Megane, Laguna etc. only precoded for a specific type of Reno. Need only PIN for making them working.
Only precoded Renault ID46 keys are for selling, never seen blank-blank keys sold.