PDA

View Full Version : Opel Corsa C Flash Memory



i_shot_the_sheriff
5th February, 2011, 05:22 PM
Hello DKians,

I just bought a KWP2000 and i just read the flash memory from my Opel Corsa C 1,0!!
I got the file here.......

Can anyone tinker it and make it more "economical" or something?
Can it be done?

Thanks


I'm new to this field (chiptuning).... do you have any proposals on where to start studying??

i_shot_the_sheriff
18th February, 2011, 10:31 AM
Also... do you know a better tool or a proffessional one to make this tuning by myself?

oldford
18th February, 2011, 11:21 AM
Car manufacturers spend a lot of time mapping the engine.
I doubt if you can make it any more economical.
Unless you have a problem/defect in which case that should be fixed/repaired.

grinovsky
18th February, 2011, 11:34 AM
yes,that's right
the Car manufacturers programme the ecu to make it best economic
the chiptuning let you have more power by more burning fuel
so,what you ask for?
the proffessional tool to make this tuning by your self is winols

i_shot_the_sheriff
18th February, 2011, 11:43 AM
Ummm i didn't know that m8!!
I thought that by tinkering that file you can make it more economical!!!


Whats the original website for winols? I didn't find it! :P


Thanks for the info by the way!

grinovsky
18th February, 2011, 12:02 PM
use search buton to find winols in DK forum

oldford
18th February, 2011, 12:54 PM
If you change the file without the help of professional tools - like a rolling road, a knock detection kit and exhaust gas analyzer - you can also destroy the engine.

i_shot_the_sheriff
18th February, 2011, 01:08 PM
So..... it's not that simple huh??
I guess i have to stick with the eprom reading only! :P

supervizor
9th July, 2011, 09:55 PM
Hi, I own a Corsa C 2006 Z10XEP, I have a Galetto 1260 and I could not read the file with this interface, you have any advice about this?

I get this error when trying to read the map.

Start data reading....errore SK1
Errore sead key

I tried and Z10XE and works perfectly.

bazare
9th July, 2011, 10:09 PM
Man, z10xep and z14xep are using ME7.6.1 which will never work by galletto. z10xe has a different ECU. For more details contact me in the romanian opel forum, or here by PM.

supervizor
10th July, 2011, 02:39 AM
OK man, I know that have different computers for both work z10xe Motronic ME1.5.5 although the k-line, understand that they are so different, why can not connect to ME7.6.1 Galleto?

bazare
10th July, 2011, 08:24 AM
because ME7.6.1 it's not in the list of supported cars. to do it by OBD your safe choice is tech2