Diga clone - Crysler cable

[mario313]

my Chrysler Voyager cable does not work
is there any way I can repair it?

[n599fbm]

yes, it buys an original one !!

It is joke !!!

by PM.

Rgds,

C.

[treo]

my Chrysler Voyager cable does not work
is there any way I can repair it?
Use this wiring and repair your cable:

[almeida]

in your case is the max 485, is very easy to burn that.
NEVER turn ignition off and on when diga are connect.

[pandora6]

Sorry. Not heer.

[mario313]

Use this wiring and repair your cable:

In this wiring is many mistake...

[treo]

In this wiring is many mistake...
Take just good part and repair the cable,I fixed mine and I do Voyager with him.

[justy22]

In future never ever turn ignition on or off with lead plugged into obd port or it will fry, set ignition then plug in

[treo]

Here is picture with Chrysler cable

[mario313]

Thanks Treo, i try fix this stupid cable...

[mario313]

On my image is marked wrong cable connections from the OBD connector on the original image. Other cables from the OBD connector in the picture are ok?

[mario313]

Solved, cable work like a charm...

[rrador]

hey guys i have my TU just collecting dust here so i thought i would try it on my car to see if this chrysler cable works

it is 2003 dodge dakota...did not work just says working and doesnt do anything.

i checked my cable according to the schematics posted above and it looks to be ok unless i missed something.

is there anything else i can check?

[motorsport]

hello some one have conection in circuit bcm box for upa thanks

[motorsport]

any one have picture upa or picture good cable working for TU

[almeida]

hello
i don?t understand very well what you asking for
see if is that
sometimes cables are bad contruction and have a cable connect at wrong place