how to read 1l02m xprog help

[technobox]

hello all
i try read 1l02m mask ezs mcu but didnt read xprog
pls send me pictures connecting
help pls
2007 model vito ezs 1l02m mask

[tachonow]

hello all
i try read 1l02m mask ezs mcu but didnt read xprog
pls send me pictures connecting
help pls
2007 model vito ezs 1l02m mask
Xprog fails manny time reading HC908 mcus especialy secured like this one.
Try UPA. Is better than Xprog and ETL rules.

[technobox]

i try upa mate but didnt read any pin lift or securty write i didnt have securty pls help

[technobox]

pls help all
thnks

[technobox]

pls help send me pictures for xprog how to connect pins

[tachonow]

pls help send me pictures for xprog how to connect pins
Here you have it.
You couldnt read it with UPA ?

[exe123]

had 2007 sprinter ezs some time. none of the known ss-bytes was working with upa. only solution was etl.

[vageric]

had 2007 sprinter ezs some time. none of the known ss-bytes was working with upa. only solution was etl.

this ezs you can make with rosfar!!!

[exe123]

really? show me how you make HC908 with rosfar ;)

[T72]

really? show me how you make HC908 with rosfar ;)
with all respect, but you frend have talked about 2007 Sprinter, and this car EZS has 9s12 onlly!

[vageric]

@ exe123, you sayed a sprinter 2007.
and like T72 sayed, have 9s12 inside and not Hc908!!!

[exe123]

sorry mixed up sprinter with vito

[cokolo]

i try upa mate but didnt read any pin lift or securty write i didnt have securty pls help

Securyti Bytes for 1L02M A7-05-A6-58-A6-58-A6-55 :ciao:

[technobox]

i read but all ad ad ad ad ad ad why
pls help

[exe123]

wrong security bytes

[cokolo]

Securyti Bytes for 1L02M A7-05-A6-58-A6-58-A6-55 :ciao:

This is 100% correct Securyti Bytes for 1L02M A7-05-A6-58-A6-58-A6-55 . Read out to the ETL programmer , NOT UPA-usb programmer .:hello:

[exe123]

Maskcode only means nothing :D it can have different SS byte ;)

[technobox]

pls help mate whats the ss byte

[exe123]

as I already told you. had vito with 908 and tried almost 15 different ss bytes. non worked. even digiprog don't have them!
only solution was etl

[technobox]

mate i have only xprog and upa pls help

[exe123]

It's not possible with the HW you have. Just accept it.

[technobox]

ok mate i read now upa but only
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 02 06 87 46 3D 01 08 08 11 E7 FF FF FF AA 01 02 0F 00 00 23 28 00 00 FF FF 01 00 00 79 AE 10 01 00 53 90 EF EA 1F 1E 1E 00 00 0F 13 BB 07 12 76 05 25 D0 00 00 00 91 F8 CB 91 F8 CB 91 F8 CB FF FF FF FF FF FF A4 AA 2A 00 00 10 00 98 3F 5A 6D FF FF FF FF 5A 57 44 46 36 33 39 37 30 33 31 33 30 30 36 34 32 33 01 63 95 45 05 08 63 95 45 06 08 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
this type whats wrong

[technobox]

whic typa mcu i select it
i read mc68hc08as32 pls check its ok

[exe123]

dump looks ok. 956641km

[technobox]

where the byte

[exe123]

91 F8 CB 91 F8 CB 91 F8 CB

[technobox]

tacho soft wrong mate i made 0030 first 00 00 00 00 00 00 00 00 8 coloum

[tachonow]

Ive told you to read it as 908AZ60. Put 00 on location mentioned by exe123 and job done.

[technobox]

pls change 93245km

[technobox]

this i make 93456 but show 934560km

[tachonow]

here you have it.

[technobox]

this one hc08az60 pls chek it

[technobox]

mate not ok this cars show 934560km we write 93456km

[PremierD]

mate not ok this cars show 934560km we write 93456km


93456 ish .. lol

[technobox]

mate i write ezs is ok or change againg dashboard

[alimmo]

sorry guys,but this is getting a bit long and confusing so can someone please simply confirm if the Xprog v5.0 will do the Vito key module or not if so please explain how to reset ie if security bytes needed also which location to zero out if so.

Many thanks in advance

[technobox]

mate same 934560km why i have ezs problem

[cokolo]

Maskcode only means nothing :D it can have different SS byte ;)

To me has always been these SS :ciao: for Mercedes Vito 2007-2006 :dong:

[PremierD]

mate same 934560km why i have ezs problem

Try this in the cluster mate ...and the EZS file I sent ... you may get lucky ...

[technobox]

mate problem solved i read az32 hc8 and put 00 al 0030 colum
than write cluster for tachonows file than oks
thnks all

[jarfm]

mate problem solved i read az32 hc8 and put 00 al 0030 colum
than write cluster for tachonows file than oks
thnks all

What the security bytes U used to read this 1L02M?
I used DA-AC-E5-2C-E5-2C-E5-2C and Upa only shows me AD AD AD AD AD...

????

[jarfm]

What the security bytes U used to read this 1L02M?
I used DA-AC-E5-2C-E5-2C-E5-2C and Upa only shows me AD AD AD AD AD...

????

SOLVED
I used DF-C8-EA-48-EA-48-EA-48 witch gave me DRPETER. Works well. :)