travelpilot e1 please help to decode

[flaviu_syzu]

hi all. i have this travelpilot and i decode it from serial,but without succes,the cod 1767 is not good.can you decode from dump?because i am not sure that is original dump,or can be removed?
thanks friends!!!!!!!

bp travelpilot e1 ,
bp030133283515
7 612 300 301
eprom 95320
:ciao:

[zvasile]

8241.......:questionmark:

[prusony]

Bet on 1767 .

[Fradebo]

AND 1767 IT IS GRTZ FRADEBO

[flaviu_syzu]

1767 is from dump?i try with this and is wrong code:dong:

[Fradebo]

In that case check your serial again .....

grtz Fradebo

[flaviu_syzu]

the serial is k,i am not sure if is original dump because it was worked on this 95320 that is stange.any ideea?
best regards!!!!!

[prusony]

Maybe you're wrong connect to device power.....

[flaviu_syzu]

and how to conect? i conect : + from batery,
gnd,
+ from ignition
need to conect anything?and after I type the code and give ok button displays"code falsch,warten 60 minuten"
which means he saw but did not accepted the code!
or I'm wrong?
Thanks all!!!!!!!

[prusony]

Sometimes need connected, plus to "S"-contact radio.

[Fradebo]

This means something is wrong.
For a correct functioning of the code you just need a continious current on pin 4 and the +15 contact current at pin 7 of block A of the ISO-connector .
Nothing else is needed ( except for a mass connection off course )
Control if there is an engraved serial number and if it corresponds with the code passport that was supplied originally with the radio.

grtz Fradebo