407 bsi 95128 with upa?

[darrenhyland]

hi, got a 407 '06 with siemens bsi and 95128 eeprom...my TU doesnt have a 95128 option so i want to read it with my UPA..trouble is it doesnt have a 95128 option either...what do i read it as? and how do i know what version it is?

[Eight]

read with upa usb 95 128 from BSI
Set content.

[mastaflex]

try to read as 25C128

[darrenhyland]

hi tnx for the reply but i sorted it using my willem usb...it has 95128 in the menu and it was type 2 so i did the new kms in dash and fff in bsi where tachosoft showed...100% result!

[jarfm]

UPA has 95128 on the list. 100%. I did 407's BSI few times. My sugestion: read 95128 content and write only part where mileage is stored. Quicker and safer

[mastaflex]

there is not 95128 on UPA menu

[Digamax]

hi, got a 407 '06 with siemens bsi and 95128 eeprom...my TU doesnt have a 95128 option so i want to read it with my UPA..trouble is it doesnt have a 95128 option either...what do i read it as? and how do i know what version it is?
Hi, advice for all who use TU for BSI programming:
First read eeprom with some eeprom programmer and save file!!!
For all 407 BSI you can use NYO40 for calculation except last BSI crypto (2008-...).
After you have save file, you can play with TU.
By the way, TU can do some version on P407 BSI. In menu you can see I think 95320, but never mind, that is some writeing error in software many. If you get good old value you can write new.

best regards
Vladimir

[mastaflex]

good advice m8. always have a good original dump appart