PDA

View Full Version : EZS 211 545 10 08 NO ACCEPTS KEY


spiridonas
12th February, 2011, 02:53 PM
Hi i need solution for the EZS 211 545 10 08
I tried to start but no accepts key and not rotates key
Many thanks in advance
exe123
12th February, 2011, 03:05 PM
have you tried to set km with some 5 wire tool like rosfar, xprog-m?
Eeprom looks ok upload flash
spiridonas
12th February, 2011, 03:14 PM
have you tried to set km with some 5 wire tool like rosfar, xprog-m?
Eeprom looks ok upload flash

No the car in virgin.
exe123
12th February, 2011, 03:37 PM
then maybe key is broken. try spare key, make diag with DAS and read faultcodes
spiridonas
12th February, 2011, 03:48 PM
then maybe key is broken. try spare key, make diag with DAS and read faultcodes

I tried and the second key but the same problem
i can't read faultcode without key on position II .
If i read eeprom and flash from damaged ezs and write in other used but good maybe to start?
exe123
12th February, 2011, 03:51 PM
yes, you can try that. ezs cloning is possible
spiridonas
12th February, 2011, 03:57 PM
yes, you can try that. ezs cloning is possible

I can to try if ezs accepts key on bench with external supply 12 volt ?

YouTube - benz cl600 samrt key registration

YouTube - BENZ S500 2006 AMG SMART KEY REGISRATION.wmv
spiridonas
13th February, 2011, 10:49 PM
is possible to check ezs if accepts key on bench with external supply 12 volt ?
nothing
14th February, 2011, 06:12 PM
NO, it's not this one on video is w220 , w211 have ESL you need to take ur ESL out and connect the K line to EZS , if you made a key to the EZS you need to adopt the ESL , in this case you need ESL reader
Kaluluka
14th February, 2011, 06:43 PM
Hi i need solution for the EZS 211 545 10 08
I tried to start but no accepts key and not rotates key
Many thanks in advance
Try this file (EEPROM only): You have to Write Keyx.bin files to NEC IC inside key in order for EZS to work with that key..............

MASK 3K91D is HC912 not 9S12!
http://www.motorola.com.cn/semiconductors/mcudsp/forms/errata/68HC912DT128AMSE4.pdf


P.S. You can connect to EZS withouth key in position I or II, if you use STAR DIAGNOSYSiS....................
Romanky
21st February, 2011, 08:33 PM
Please EZS W211 photo BENZ KEY MOUDLE (9S12) has evaporated some of the resistance you are subscribed to me !
cardoctor
2nd May, 2011, 05:51 PM
Hi i need solution for the EZS 211 545 10 08
I tried to start but no accepts key and not rotates key
Many thanks in advance.


Hi all.
Pls share me flash with xprog m or r260 format.
My flash was damage.
Thanks