PDA

View Full Version : golf5 r32



ngoncalo
14th February, 2011, 07:12 PM
hi,
i have a mpps and im having problems reading ME7.1.1 always gives error at 6% and stop reading.
Anyone knows waht to do??
thanks

ominimicu
14th February, 2011, 07:26 PM
what error do you get? also try reading directly to the ECu using the pinout of me7.1.1

rossoelab
17th February, 2011, 12:53 PM
files in the ECU is original or mod?
perhaps does not read because the file is encrypted

TECH
17th February, 2011, 02:15 PM
I had the same problem .... was a tuned and lock file as I find later.. :(

rappttor
17th February, 2011, 05:49 PM
see if all is stock on the ecu pcb
try directly to th epins using a power suply
should work

rsibiza
21st February, 2011, 10:22 AM
This ME7 i suggest unsolder flash 29Fxxx read and write it this way..

A friend bricked his ecu,reading and writing back its file...

After this i tryed rewrite flash paralell..no way...

Safe way..i suggest..paralell programmer

noriginal
21st February, 2011, 10:06 PM
problem isn't clone mpps is other!