View Full Version : Range Rover HSE 2.7 Sport
Pixel123
15th February, 2011, 10:24 PM
Hello,
I need to do the dash of a Range Rover HSE 2.7 Sport. Has somebody already done a car like this? What tools do I need?
I was planning to buy UPA-USB Serial Programmer because on tachosoft they say there could be a 35080 or a 9s12DG256 on the dash? But is that all the locations? If not what tools do i need for other locations?
PS: How do you guys always know how to get the dash out? Is there an incredible software program to tell me ?
Thanks alot.
technobox
15th February, 2011, 10:30 PM
which model cars
technobox
15th February, 2011, 10:34 PM
35080 inside and buy xprog m is best
Pixel123
15th February, 2011, 10:36 PM
Is that all that need to be done? Car is from 2006
Could you tell me how to open it up? What's best location to buy Xprog-m?
technobox
15th February, 2011, 10:40 PM
mate easy to open cluster
i bought ecutools china but good products
Pixel123
15th February, 2011, 10:43 PM
Do you need to solder it off?
Not stored in ECU ?
I already have Tacho universal 2008 will this work?
technobox
15th February, 2011, 10:47 PM
no solder it only clips soic 8 use
bcu stored km but if only make dashboard is ok no problem
Pixel123
15th February, 2011, 11:04 PM
The exact model of the car is:
Land Rover Range Rover 2.7D TDV6 2006
I know how to open the cluster, but I don't know how to get the cluster out of the car. Somebody knows? Or witch software do I need?
technobox
16th February, 2011, 12:07 PM
search google mate i founded video remove dashboard
alimmo
9th March, 2011, 03:43 PM
Could someone please post me PDF on BCU/CAS/ Removal instructions from behind the glovebox Please ??
Thanks in advance
electromech
9th March, 2011, 07:56 PM
Pixel123.......dont forget to get new chip,cluster very easy just remove lower and side panels,two torx screws at steering adjuster cover unclip and lower revealing two torx screws securing cluster ,unclip rear plastic cover of cluster and she will be easy to find.....
Alimmo.......unscrew lower (kick panel)dash panel to reveal bcm two 10mm nuts that are easy to see just undo the nuts.......now you need to walk away and go make you some coffee cause the next couple minutes is going to test your patience...the rest is all connectors no more bolt or nuts it just lowers downward from here ......just remember stay calm
Toutancamon
21st February, 2014, 09:31 PM
I have a problem with my range rover 2008 TDV6
it but a message on the dashboard (DPF encracer contact dealer)
I want the filter is regenerated particle with VCM but I can get it to
when I do the service he asked me to put online
I need help please
gbratk
4th April, 2014, 09:01 AM
Is in Range Rover sport 2.7 v6 HSE mileage stored only in dash, or also somewhere else?
Thank you
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.