PDA

View Full Version : 2009 Odyssey 77960-SHJ-C022-M1


crashcar
17th February, 2011, 12:56 AM
Hi Guys.Need help to clean 2009 Honda Odyssey 77960-SHJ-C022-M1.EPROM 95640.ANYONE PLEASE.
cklair
17th February, 2011, 05:45 AM
crash cleared,report back
crashcar
17th February, 2011, 06:23 PM
Hi.Thank you for helping me out.But this dump is no good.Still have a bunch of crash.I can pm you print of what is scan shows.
crashcar
18th February, 2011, 01:03 AM
Hi guy's.It was resolved.I did pull out good dump from another 2010 Odyssey,that I have.Anybody need it, welcome to download.It's works perfectly fine.Don't forget to calibrate OPDS and press THX.Regards. Crashcar.
martij976
18th February, 2011, 04:35 AM
Hi
Can U post dump after OPDS calib.? Just curious, what changed, so we can virgin that..
Thanks for posting good dump!
crashcar
18th February, 2011, 01:57 PM
Sorry,but customer picked up vehicle already.
credoline
18th February, 2011, 02:06 PM
I think that lines 500,510,520,530,540 and 550 are OPDS data.
So, i gave you direction, when you have chance test that
alexs600
19th February, 2011, 04:39 AM
calibration is done only in "OPDS WEGHT ECU" unit
diff ecu have diff id to mach with main SRS module
martij976
19th February, 2011, 04:57 AM
Brand new SRS module (or virgin dump) don't require the calibration...
alexs600
19th February, 2011, 05:17 AM
That is correct! -Because it is gets id from seat
But if it is even virgin and seat itself not calibrated -you will have problem!
AMLGAR
19th February, 2011, 05:52 AM
whats scan tool, can use to calibrate seats.:help:
cklair
19th February, 2011, 05:57 AM
whats scan tool, can use to calibrate seats.:help:
you can use lunch or honda hds both will do the job without the problem
martij976
19th February, 2011, 06:00 AM
Reply to alexs600

Well than u just have to use an HDS and calibrate it... not big deal..
Usually not needed with new nor virgin unit...
Just saves some time...