IAW59F M3 HW003 IMMO

[jolor]

I need to do this immo ecu or put it virgin. I read with Galletto 1260 but do not know where to change the dump. Can anyone help?. Dump attached. Thanks.

[exorcistaecu]

it is easy to put it in boot mode in the program tries clone-decode Iaw59F ..... dump laws, rewrite the same dump bed;
How do I connect it take by car is in automatic code

[jokersat]

are you tested this solution or not

No way with galleto tested many times and 100/100 no way

im waiting my 59f decoder from italia i think this can solve this shit ecu

galleto + kwp2000 = No way

@+

[alldecode]

yes, it works.

First read dump from ECU and same dump put in ECU and ECU is virgin.

I use Galleto 1260 and Its works vith ECU hw>100

[jokersat]

im sure 1000/1000 not working

i tiered many times with galleto

driver clone decode iaw59f and no way

now i have the best solution for 59f 5sf no need to open ecu

immo off = tested

virgin = tested

@+

[ankara06]

im sure 1000/1000 not working

i tiered many times with galleto

driver clone decode iaw59f and no way

now i have the best solution for 59f 5sf no need to open ecu

immo off = tested

virgin = tested

@+


with celeste tool ?? or other ??

[Aniskey]

you can use iaw decoder from celeste italia

[luiggii79]

I need to do this immo ecu or put it virgin. I read with Galletto 1260 but do not know where to change the dump. Can anyone help?. Dump attached. Thanks.
this your dump is not bootmode

[luiggii79]

i was change it eeprom this ecu iaw59f.m3 hw003 , is not possible reading the ecu in the bootmode .i tried everything but no change . the finish i was change eeprom to 95080 but what is writing to memory . please help me for one dump virgin