Unknow version C4_Picasso

[Rito]

Please I Need correct this dump Citroen C4 Picasso.

Enigma and Noy4 not know this version..
I need 110000 and dump have 157762

Thanks

[T72]

Please I Need correct this dump Citroen C4 Picasso.

Enigma and Noy4 not know this version..
I need 110000 and dump have 157762

Thanks
I will try with dp3, but my enigma has more versions of bsi by eeprom..... have you update for crypted bsi?

[T72]

its 0km, program dash for actual milage

[Rito]

I will try with dp3, but my enigma has more versions of bsi by eeprom..... have you update for crypted bsi?


My enigma is V2.75 last Full update.
And unknow this version..


Thanks for help...
Maybe DP3 have....

[Digamax]

Please I Need correct this dump Citroen C4 Picasso.

Enigma and Noy4 not know this version..
I need 110000 and dump have 157762

Thanks
Which voltage you use for reading?
I made some experiment with different voltage for reading on Enigma.
With 4 V on 95128 eeprom crypto I got message Unknown version, but with 4,5V everything is OK and right km show.

Best regards
Vladimir

[Rito]

I will try tomorrow..
I had try whit epron removed....3.5V...


But......maybe...will work...

thanks

[Digamax]

I will try tomorrow..
I had try whit epron removed....3.5V...


But......maybe...will work...

thanks
I dont have 95128 eeprom to try, but I will try to find some eeprom tomorrow.
With voltage lower than 4,5V Enigma cant recognize version of this BSI.
I got this information from my dealer:

"When trying to read 35080, 950x0, 250x0 type eeproms then please set your read/write voltage to at least 4.5V

These are 5V working chips."

Conclusion is: Never use voltage lover then 4,5V for 5V eeproms!

Best regards
Vladimir

[T72]

I dont have 95128 eeprom to try, but I will try to find some eeprom tomorrow.
With voltage lower than 4,5V Enigma cant recognize version of this BSI.
I got this information from my dealer:

"When trying to read 35080, 950x0, 250x0 type eeproms then please set your read/write voltage to at least 4.5V

These are 5V working chips."

Conclusion is: Never use voltage lover then 4,5V for 5V eeproms!

Best regards
Vladimir
dp3 works interesting about voltage.... its trying to read several times with several voltages, software pick up best voltage and programing with it.

[Digamax]

dp3 works interesting about voltage.... its trying to read several times with several voltages, software pick up best voltage and programing with it.
Yes, that is better in dp3. With Enigma you have to adjust voltage manual.

[Rito]

dp3 works interesting about voltage.... its trying to read several times with several voltages, software pick up best voltage and programing with it.


You try In DP3 about version??recognize this version??

[Rito]

I dont have 95128 eeprom to try, but I will try to find some eeprom tomorrow.
With voltage lower than 4,5V Enigma cant recognize version of this BSI.
I got this information from my dealer:

"When trying to read 35080, 950x0, 250x0 type eeproms then please set your read/write voltage to at least 4.5V

These are 5V working chips."

Conclusion is: Never use voltage lover then 4,5V for 5V eeproms!

Best regards
Vladimir


You have right..
I read in 4.5V and this recognize version...


Problem solved..........

[T72]

You try In DP3 about version??recognize this version??
tomorrow morning, will let you know

[javilette]

whith dp3 i have te same problem whith peugeot 307 in bsi the dp3 can see the original data i changed the data but dont works in car i read the new data in dp3 them but in dash show to me the old data , i have problem in dash of some c2 whitc dash and c3 dash too.this is the version of 307 that dp3 dont work ok and put the side for reset bsi.

i think that no problem the V use for dp3 for read . the machine try but when read the machine all ok.

sorry for my english

[alim]

if you thing that the problem is not dp3 so where is the problem mate? may be is your brain.exe is in trouble.
dp3 is one of the best tool and work exelent on psa group.

[T72]

whith dp3 i have te same problem whith peugeot 307 in bsi the dp3 can see the original data i changed the data but dont works in car i read the new data in dp3 them but in dash show to me the old data , i have problem in dash of some c2 whitc dash and c3 dash too.this is the version of 307 that dp3 dont work ok and put the side for reset bsi.

i think that no problem the V use for dp3 for read . the machine try but when read the machine all ok.

sorry for my english
dp3 have p307 bug, 912 works ok, but 95160 from 2003 not all versions work ok.........

[javilette]

i have dp3 but enigma is better than dp3 for psa,the problem is in that the dp3 enigma digiprog..... dont have all the version in his software.

[T72]

i have dp3 but enigma is better than dp3 for psa,the problem is in that the dp3 enigma digiprog..... dont have all the version in his software.
last 8 PSA cars I have made with dp3 by obd, its takes the same time(long programing), but must do nothink, no difficult disassemble, no blood from hands, just dash programing on the table....
So really dp3 is better now on PSA :viking:

[Digamax]

last 8 PSA cars I have made with dp3 by obd, its takes the same time(long programing), but must do nothink, no difficult disassemble, no blood from hands, just dash programing on the table....
So really dp3 is better now on PSA :viking:
I have Enigma, but I for BSI always first read eeprom with Elnec Memprog eeprom programator (200 euro) with pin check options. With him I always now what I am doing.
By the way in next update Enigma will can do BSI via OBD.


Best regards
Vladimir

[javilette]

i prefer remove bsi in 5 minutes that i see the machine 15-30 minutes working for this. is it the time for do it whitch dp3 by obd ?????? i dont have this software

[pooler24]

I don't know if you have solved it already
I just edit your BSI dump

mileage is stored on add from 27C to 2AB
so 99 12 18 00 58 70 i changed for E0 C8 10 00 00 C4

181299 - dec 1577625
10C8E0 - dec 1100000

I hope it helps you
roman

[T72]

I have Enigma, but I for BSI always first read eeprom with Elnec Memprog eeprom programator with pin check options. With him I always now what I am doing.
By the way in next update Enigma will can do BSI via OBD.


Best regards
Vladimir
what will be price of update?

smelecom will have soon too, will start seling for price like enigma or elprosys, will not work from start, but some day they will corect ..... :D

Abritus have did soft, all others stealing....

[Digamax]

what will be price of update?

smelecom will have soon too, will start seling for price like enigma or elprosys, will not work from start, but some day they will corect ..... :D

Abritus have did soft, all others stealing....
I dont pay any euros for that update. I dont need that. In my country price for mileage correction for that car (C4 Picasso, P407, C5 new, C4...) is about 30-60 euro. I already can do that cars so I dont pay for OBD solutions.

Best regards
Vladimir