Deus Violentia
21st February, 2011, 04:02 PM
Hi guys,
yesterday I?ve tried to read the PIN from an ECU via DashCAN/COM and various other tools:
VW ME7.5.20 03C906057AG
Seems that ME7.5.20 is too new for all tools I have, normally I am messing around with EDC15/16 :-(
The question is how to get the PIN out of the ECU, don?t have the dash from this car which should have the same PIN as the ECU.
I though about using a SOIC8-clip and read out raw data from 95040 eeprom were the PIN must be in somewhere.
First, is there a easy LPT/serial schematic and a freeware tool for this task?
Second, is there a tool that shows me the PIN within the BIN-file?
Third, am I totally wrong in thinking that it?s that easy? :help:
May there be even a tool for a dumb KKL-Interface?
cheers!
yesterday I?ve tried to read the PIN from an ECU via DashCAN/COM and various other tools:
VW ME7.5.20 03C906057AG
Seems that ME7.5.20 is too new for all tools I have, normally I am messing around with EDC15/16 :-(
The question is how to get the PIN out of the ECU, don?t have the dash from this car which should have the same PIN as the ECU.
I though about using a SOIC8-clip and read out raw data from 95040 eeprom were the PIN must be in somewhere.
First, is there a easy LPT/serial schematic and a freeware tool for this task?
Second, is there a tool that shows me the PIN within the BIN-file?
Third, am I totally wrong in thinking that it?s that easy? :help:
May there be even a tool for a dumb KKL-Interface?
cheers!