passat 2007 2.0 tdi milage change wont

[el_futte]

i have a passat from 2007

i have try whit vag kommander 5.1 to change milage . but !

when i read the cluster milage it show the right millage 139xxx but when i change it bellow to 135000 it says milage change. but nothing happens in cluster

anobody the have a solusion ??


// Martin

[z786]

i think you would find microna cdc in dash, u need a "proper" tool to do this dash

[nebojsapejcic]

You are going to need to spend some cash and buy better tool. Chinese didn't clone this yet.

[tachonow]

You are going to need to spend some cash and buy better tool. Chinese didn't clone this yet.
Yes chinese didnt cloned this yet but has their original tool named VagProg made by Smelecom.

[mastaflex]

2 minutes job with VAGPROG

[alimmo]

i have a passat from 2007

i have try whit vag kommander 5.1 to change milage . but !

when i read the cluster milage it show the right millage 139xxx but when i change it bellow to 135000 it says milage change. but nothing happens in cluster

anobody the have a solusion ??


// Martin


R250 Clone will do this & only costs about ?100.

[alim]

R250 Clone will do this & only costs about ?100.


you look like chinnese dealer mate may be you want my thanks? NOO
you try to find the cheapest tool for expancive car , why exist the obd tools to do the job by obd.

[vuno01]

with vag k can after you adjust the mileage
you have to take of the dash fuse and then
put back on and the mileage will be changed

[el_futte]

vuno01 are you sure ??

[dave11674]

with vag k can after you adjust the mileage
you have to take of the dash fuse and then
put back on and the mileage will be changed

i concur :)

dave

[nebojsapejcic]

Is this a joke or you are serious? Can anyone else confirm this..

[exe123]

big bullshit about take out fuse. if k+can can set km it will reset the dash via obd. no need to pull out anything. for some very old dashs or on some opel dash this is common. but not for passat with micronas.

[mastaflex]

vag k+can will not do this dash. have to take dash out and do it with xprog or r250 or easy solution is to do it by obd using no cheap tool like VAGPROG , ENIGMA or DP3

[exe123]

vag k+can will not do this dash. have to take dash out and do it with xprog or r250 or easy solution is to do it by obd using no cheap tool like VAGPROG , ENIGMA or DP3

Only original AVDI + VAG Commander will do it.
Of course K+Can clone will never ever do it

[smartymarti]

R250 makes very very hard work if this job however at 100 pounds it us the cheapest solution