PDA

View Full Version : peugeot 206 diesel no fuel getting pasted injector pump



nitehawk10
27th February, 2011, 10:32 AM
my peugeot 206 diesel as no fuel getting pasted injector pump i think its a lucos pump is there any way i can fix this without going to main dealer or is there away round this problum any help would be great

cactikid
27th February, 2011, 10:43 AM
any fuel cutoff activated that may need resetting?

nitehawk10
27th February, 2011, 10:49 AM
theres no fuel cutoff its a lucos pump

nitehawk10
27th February, 2011, 05:20 PM
when battery went flat my father inlaw changed it 4 me but he had left the boot lid up so when he place leads back on battery it sparked since then hasnt started

smirnoff_rules
27th February, 2011, 05:25 PM
try this , bsi reset


Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.

nitehawk10
27th February, 2011, 05:32 PM
what will this do

nitehawk10
27th February, 2011, 06:04 PM
i have done this
Put the driver's window down, lift the bonnet and ensure all equipment is switched off.
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.

and no luck

nitehawk10
27th February, 2011, 06:08 PM
mind you my fob dont work central locking since the fob got droped and wet mite end up having to bypass it till i can get someone to fix it

nitehawk10
27th February, 2011, 06:19 PM
i have my immobiliser code does that help

nitehawk10
27th February, 2011, 09:50 PM
can this be bypassed so at least i can get the car running

chacarita
28th February, 2011, 10:12 PM
you need conect a scanner like pp2000 and post your default code to can help you ias a LUCAS inyection?, post vin number please

nitehawk10
1st March, 2011, 07:03 PM
i have vin number but when i link tool up it gives a link error

nitehawk10
1st March, 2011, 08:23 PM
my vin number
VF32AWJZT41082069

chacarita
1st March, 2011, 09:00 PM
This is a simple diesel motor, you can remove easy solenoid from diesel pump and put a simple solenid removing inmo arround solenoid

nitehawk10
1st March, 2011, 09:04 PM
its got sheer bolts in it so i cant get to solenoid

nitehawk10
1st March, 2011, 09:21 PM
can i cut wires to the solenoid thats all ready there