Toyota previa program key

[alfons37]

I have toyota previa 2.4l 115kw engine code 2AZ-FE year 2000
I have one key and car work fine, but now i order new key and transponders (empty) and need program this key.

which is the best way to do it?.
Thanks :thrasher:

[automatemad]

I have toyota previa 2.4l 115kw engine code 2AZ-FE year 2000
I have one key and car work fine, but now i order new key and transponders (empty) and need program this key.

which is the best way to do it?. I have sbb v28, zedbull, mongoose toyota cable.

Since I have a key so I am afraid to destroy it. But if I understand correctly, you can copy the key to zedbull and load the new transponder with zedbull.

Thanks :thrasher:

which type is it 4c or 4d check with zedbull

[immo_key]

If ic900 eprom 93c86 its for 4C key
you can add key with ad90 use 4C electronik

Best regard, immo_key

[alfons37]

It is 4C Texas WR

[alfons37]

anyone help?

[Bishop c4]

dont worry if its a 4c texas is rewritable so nothing happens if you make a try!
I think its posible becausse the cloning of texas 4c its very easy for all cloning machines. (even for the zenbull)

Regards

[alfons37]

now i test, i put orginal toyota key in zedbull and read and after put empty 4c texas transponder.

[paul_12345]

now i test, i put orginal toyota key in zedbull and read and after put empty 4c texas transponder. But zed bull say "transponder not is blank" what is wrong?

you can't clone 4c onto a 4c transponder, it has to be a txp1 or electronic head type

[alfons37]

Ok many thanks for help:marchmellow:

I test with tpx1

[puu]

Post immo dump

[elmaalouf]

hello friends
pls help can i know where is located the immo box in a toyota previa 2000 model?
thanks

[siyadk]

i am not sure, but i believe this doesnt have immobox and it is the ecu
try removing ecu, and check whether security light blinks or not.. If not , then u need to the eeprom from the ecu

Hit thanks it was helpful