W203 EZS HC08 1J35D

[papalos_]

Hi mates.

This is the dump that I read with ETL from MCU to calculate keys.

I have some questions:

a. Are there HEX data in MCU from 0600-07FF? I made a mistake with offsets during programming and I fill that area with zeros:beheaded:. If yes, can someone send me a dump with the data in this area or a full dump?

b. Is it possible to make a bench test with EZS and ESL to see if keys working?

Regards

[automatemad]

Hi mates.

This is the dump that I read with ETL from MCU to calculate keys.

I have some questions:

a. Are there HEX data in MCU from 0600-07FF? I made a mistake with offsets during programming and I fill that area with zeros:beheaded:. If yes, can someone send me a dump with the data in this area or a full dump?

b. Is it possible to make a bench test with EZS and ESL to see if keys working?

Regards

a ) dump with its keys

b)yes it is possible to test for w202 ,203 210 211 with old esl renewed or with esl emulator

from MEHACO (http://www.mehaco.com/)

[papalos_]

a ) dump with its keys

b)yes it is possible to test for w202 ,203 210 211 with old esl renewed or with esl emulator

from MEHACO (http://www.mehaco.com/)

a. About my question for data in 0600-07FF area? Are there data or they are all FF?

b. I have renew ESL for W203. According to WIS schematic, there are 4 connectors for EZS, 2 with 8 pins and 2 with 10pins. By connecting pin 7 to ELV pin 3 and 2,3 from EZS and 1,2 from ELV to power supply, I'm trying to test a key I've made, but it's not working. I don't have the car to test it. That's the reason that i ask for data in area 0600-07FF. I'm afraid that I've delete them.
Is there another way to check that ELV,EZS,Key setup is working after programming?

Regards

[ider38]

hi ineed key for ezs 1j35d w203 545 01 08
please help me as soon as possible

[smayer]

hi ineed key for ezs 1j35d w203 545 01 08
please help me as soon as possible

And you expect keys by miracle? where is the EZS dump?