PDA

View Full Version : SATURN VUE IMO



llaverosv
3rd March, 2011, 12:40 AM
need to start a SATURN VUE 2003. is there a way to bypass immo module.

last time I installed a kind of signal generator for a Lumina and it worked, but failed with the VUE
thanks

llaverosv

ray-ray
3rd March, 2011, 03:00 AM
3x10min. you need to turn ignation to on for 10min. then turn off and back to on for 10min.and again for 10min more. (3x 10min) will marry all the car system make sure there is good battery power for that 30min. programming.

llaverosv
4th March, 2011, 12:59 AM
Thanks
I gonna try and let you know

llaverosv
4th March, 2011, 06:49 PM
Hello
the I used the 30 min. cycle, the vehicle start ONE time , if turn off the switch, the car doesnt start any more , the security light blinking again. seems it loose the programming
thanks

llaverosv
21st March, 2011, 06:03 PM
Hello
about the Saturn VUE, I already replace ignition switch, it works for a while , then some times start and some times not.( same failure).
is there a method to bypass the passslock II system

thanks for help

llaverosv
15th April, 2011, 12:25 AM
hello
still have start problem with saturn Vue 2003 ( passlock 2 system)
again asking for help to bypass security system.

attached two pics:

1) shown switch installed
2) shown sensor hall

wire connected to switch :
yellow. orange/black, red/white

thanks

llaverosv
2nd May, 2011, 05:29 PM
solved Saturn Vue

ledojo
10th February, 2012, 01:37 AM
solved Saturn Vue

Can you share how you solved, please?