How to scan an Isuzu 6HK1 pre - 2005 ?

[Juanincho]

Someone has scanned an Isuzu 6HK1? I used usb-link but I was able to "see" the abs module only. The IDSS soft is used for 2005 and up trucks, it was useless. I heard about the tech2. There is a software that can be used with usb-link?:idea:

[atetruckrepair]

tachII with isuzu card for pre 05

[eddie8]

yes. atrtruckrepair is right. tech2 will do all years of izusu as long as it has a 16 pin dlc connector. tech2 clones I hear are going pretty cheap these days.

[DICODIESEL]

this model of engine is with tech ... clone work good...

[integlikewhoa]

Nothing that I know of for USB-link, but you can use a cheap 10-30.00 ELM327 adaptor and some generic OBD2 scanning programs, that can be found on this sight.

[DICODIESEL]

Nothing that I know of for USB-link, but you can use a cheap 10-30.00 ELM327 adaptor and some generic OBD2 scanning programs, that can be found on this sight.

is posible use this adapter for isuzu??? great..... ok thanks for the information

:thrasher:

[Juanincho]

It means those Isuzus are OBD 2 instead of J1708? It is totally new for me ! Thanks to all of you, guys. By the way, which protocol does it use? :damnmate:

[bekamon]

I tried to scan it with many devices and none has worked for me, I have come to the conclusion that can only be with the tech 2

[sosautomotive]

I tried to scan it with many devices and none has worked for me, I have come to the conclusion that can only be with the tech 2



TRY ISUZU EMPS III.

[nicole99wu]

yes, tech2 is the best choice, but you need add a 32 GM card to do the Isuzu.

[ukge4122]

Is the truck a 12volt or 24volt?