PDA

View Full Version : USB --> cluster emulator


dalisman
4th March, 2011, 01:48 PM
Hello all

Do you know something about cluster emulator for usb , like this :
YouTube - USB Instrument Cluster

but I want to just use for simple test after repair of cluster.
markony79
4th March, 2011, 10:46 PM
Hello all

Do you know something about cluster emulator for usb , like this :
YouTube - USB Instrument Cluster (http://www.youtube.com/watch?v=scpClmi2LWg&feature=related)

but I want to just use for simple test after repair of cluster.

I think you want to play, not to work
every cluster when you power up, some lamps must go on
this video its fake
bram380
4th March, 2011, 10:50 PM
Arduino emulator boatd
ipejasinovic
4th March, 2011, 10:55 PM
This isn't fake! But, you didn't pay attention. Name says everything: USB Instrument Cluster! It is a toy, which could be useful if you play video game and you want whole screen only for environment, no gauges on screen etc...
markony79
4th March, 2011, 11:03 PM
This isn't fake! But, you didn't pay attention. Name says everything: USB Instrument Cluster! It is a toy, which could be useful if you play video game and you want whole screen only for environment, no gauges on screen etc...

This dash its from Bmw e39,
dalisman
4th March, 2011, 11:04 PM
I dont want to play I need real tester. because sometimes just spedometer doesnt work and you trying to fix and allways after some thing you must go to your car and connect to test.
ipejasinovic
4th March, 2011, 11:07 PM
This dash its from Bmw e39,
So? It's a toy now.
markony79
4th March, 2011, 11:16 PM
Yes its a toy
chech 1 post
he ask for work , not for play
dash is from e39

I think this forum here is for serious job

Did I said something wrong?
dalisman
4th March, 2011, 11:24 PM
This is a toy but I looking for some actuator singiel clocks and indicators
tranzavanza
5th March, 2011, 04:25 AM
If this is for E38 or E39. there is way to test it of board.

First power up the cluster
Second press button on the right for about 5-7 seconds or until cluster enters on test mode.

Once the cluster enters into test mode, release the button and then press it again until you see test 2.

While on test 2, press button on the left to select, and the cluster will do a self test.

ALL THE NEEDLES SHOULD MOVE FROM LEFT TO RIGHT, ALL THE LIGHTS SHOULD TURN ON AND THE LCD DISPLAY WILL CICLE THROUGH ALL THE PIXELS

AND THIS IS HOW YOU RUN A SELF TEST ON E38 E39 AND E53
tranzavanza
5th March, 2011, 04:51 AM
See temperature gauge at 1:06 and tell me if this is real or fake.
dalisman
5th March, 2011, 04:40 PM
yes that I know but not all clusters have full test .