CrossEPG Full Sly EPG

[2685danny]

first of all i know there is a few of these thred's but this was buy far the easiest and its the most recent i think.

i am using gemini 5.1 on a DM800 clone enigma 2 the most recent sgt flip flop's bouquets http://www.digital-kaos.co.uk/forums/f39/sgtflipflop-skyuk-bouquets-updated-regularly-163750/
thanks for that sgt flip flop's
Not sure what other versions it will work on.

Download CrossEPG attched "enigma2-plugin-systemplugins-crossepg-oe1.6_0.6.0-svn-177_mipsel.ipk".

Transfer with FTP to the /tmp directory.

using the Gemini File Manager --> /tmp --> highlight the file "enigma2-plugin-systemplugins-crossepg-oe1.6_0.6.0-svn-177_mipsel.ipk" and press the Green Button (Install) to install.

Reboot the box.

Initial Configuration "CrossEPG" should appear under both menu>setup and under menu>plugins).

with a compatible editor edit the file /usr/bin/enigma2.sh

and before the line LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

add this line

/usr/crossepg/crossepg_epgmove.sh

enter menu>setup >crossepg>configure
set storage device ...... Preferably hardisk (i had trouble with this )
preferred lamedb ..... mainlamedb
enable csv import ..... no
force epg reload on reboot.....no
download on tune......yes
scheduled download .....every hour
show as plugin ......yes
show as extention ......yes
(i think the only important one is storage device)

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212200.jpg

exit configure

and select menu>setup >crossepg>openTVproviders

press yellow (download)
then select your provider/sat i selected Sly uk open tv(astra2 on 28.2)

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212230.jpg

In Gemini Blue panel --> settings --> EPG:
Make sure the top EPG options are all off. In the bottom panel use:
File cache ..... on
change the filename ...... epg.dat
location ..... /media/hdd
Automatically save ..... off.

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212345.jpg

YOU HAVE TO CHANGE THE CACHE FILE NAME TO EPG.DAT, otherwise it will not work.

Restart again

now goto menu>setup >crossepg>download now.
it will run and retrive epg data

Restart again

now goto menu>setup >crossepg>download now.it will run and retrive epg data again.

now you should have full epg

check via epg or menu>infomation>EPG

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212458.jpg

it shoud read something like this :
116965 Events in 716 services
EPG used 6.0mb memory

if your using mutiple providers and sat's it will be larger.

[78692]

does the line have to be added above LD....?
because i did this on gemini dm800hd and now my box only half boots and gets stuck.

[2685danny]

does the line have to be added above LD....?
because i did this on gemini dm800hd and now my box only half boots and gets stuck.

Yes is above.

[2685danny]

does the line have to be added above LD....?
because i did this on gemini dm800hd and now my box only half boots and gets stuck.

ive just checked mine "enigma2.sh" and its below mine looks like this:



#Scripte
/usr/script/inadyn_script.sh start
/usr/script/djmount_script.sh start
/usr/script/ushare_script.sh start
#Enigma
LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2
/usr/crossepg/crossepg_epgmove.sh

ret=$?

and its workng fine

sorry about that

[waj_uk]

will it work on a dm800 without a
hard drive and how would i get this to work without installing a hard drive?

[2685danny]

will it work on a dm800 without a
hard drive and how would i get this to work without installing a hard drive?

It will install and you can select USB in the configure menu. You will have to change the other file locations so it might work.


Sent from my GT-I9000 using Tapatalk

[waj_uk]

ok i got as far as adding the /usr/crossepg/crossepg_epgmove.sh to enigma2.sh

when i go to configure it just comes up with the message

'No disk found! Please install an hard disk or an usb memory storage and try again'

What can i do to fix this? i am trying to get this to work without the hard drive and if needs be i have a memory key that i can use.

Any help is appreciated

[2685danny]

ok i got as far as adding the /usr/crossepg/crossepg_epgmove.sh to enigma2.sh

when i go to configure it just comes up with the message

'No disk found! Please install an hard disk or an usb memory storage and try again'

What can i do to fix this? i am trying to get this to work without the hard drive and if needs be i have a memory key that i can use.

Any help is appreciated

if you install i to flash memory it crashes i running with a harddisk. i can rember seeing my USB in the configure but i canot confirm if it wouldof worked.

do you have a usb mounted if so try remounting and/or restart box it had trouble finding my HDD event though it was mounted.

hope this helps

[2685danny]

you could try /usr/crossepg/crossepg.configure

change the db_root=/media/thename of your USB device/crossepg

you will have to create the crossepg folder (the one in green)



db_root=/media/hdd/crossepg
lamedb=lamedb
providers=skyuk_astra2_28.2|krkadoni_skyuk_xepgdb
force_load_on_boot=0
download_daily_enabled=1
download_daily_hours=4
download_daily_minutes=0
download_daily_reboot=1
download_tune_enabled=1
download_manual_reboot=0
download_standby_enabled=0
last_full_download_timestamp=0
last_partial_download_timestamp=0
csv_import_enabled=0
show_plugin=1
show_extension=1

[reloaded]

those having problems with cross epg recognising your hard disk, then try this.

take your hard disk out and reformat using ''gparted''
in ext3 format.

i had many isuues messing around with my new hd which i installed, then getting gemini to format for me didnt help a single bit!!!

but after using gparted, i installed the drive back in again, and everything worked just fine.

[reloaded]

cheers danny

excellant user guide, and epg working perfectly! ;)

[jagga303]

Thanks to all for your helpful replies reagarding this epg.
I have an external hard drive connected to my dreambox and followed the instructions to install the epg.
It installed fine and works perfect. But i have one issue, at night i turned dreambox and hard drive off at the mains, and this morning when I switched both of them on, i couldnt see hard drive on dreambox nor was there the epg.
So i unmounted the hard drive and remounted it and i downloaded the epg again from the dreambox and now its working again as it should.
Is it a bad idea to turn the mains off for the dreambox and hard drive at night?
I dont want to keep mounting hard drive and downloading epg every morning.

thanks for replies in advance.

[reloaded]

Jagga

i had a few issues with gemini 5.1 at first, as it wud say hard drive was successfully mounted, but then realised on the epg settings ''no disk was found''

so i took the the whole drive out, connected it to my pc via the pc sata connection, and formatted using GPARTED, in ext3 format.

after that, installed it back in, gemini recognised it straight away, and worked perfect.

i have had no issues losing epg after restarting the dm800 via the mains plug.

[blogbytes]

Im new here - thanks for this guide.

I am trying to get it working with a USB disk.

The usb is mounted as media/hdd
I receive following error when I navigate to plugins


some plugins are not available:SystemPlugins/CrossEPG(no module named
CrossEPG.plugin)
Any ideas?

Edit. I have resolved the issue. I have downloaded the version that was attached to the first post. However, my epg looks different to the one displayed on the pictures and I only get 2 days worth of epg. Will dig deeper, but am pretty certain it has to do with my xml file.

Thanks

[andy211081]

does this work on UNOFFICIAL DREAM ELITE V.133DV3 PHOENIX EDITION which is enigma2? as i cant access file manager on my box?

[andy211081]

my file looks like: so where do i put /usr/crossepg/crossepg_epgmove.sh

#!/bin/sh

prefix=/usr
exec_prefix=/usr
datarootdir=${prefix}/share

if [ -x /usr/bin/showiframe -a -f /usr/share/backdrop.mvi ]; then
/usr/bin/showiframe /usr/share/backdrop.mvi
fi

# hook to execute scripts always before enigma2 start
if [ -x /usr/bin/enigma2_pre_start.sh ]; then
/usr/bin/enigma2_pre_start.sh
fi

if [ -d /home/root ]; then
cd /home/root
fi

LIBS=/usr/lib/libopen.so.0.0.0

#check for dreambox specific passthrough helper lib
if [ -e /usr/lib/libpassthrough.so ]; then
LIBS="$LIBS /usr/lib/libpassthrough.so"
fi
/usr/crossepg/crossepg_epgmove.sh
LD_PRELOAD=$LIBS /usr/bin/enigma2

# enigma2 exit codes:
#
# 0 - restart enigma
# 1 - halt
# 2 - reboot
#
# >128 signal

ret=$?
case $ret in
1)
/sbin/halt
;;
2)
/sbin/reboot
;;
4)
/sbin/rmmod lcd
/usr/sbin/fpupgrade --upgrade 2>&1 | tee /home/root/fpupgrade.log
sleep 1;
/sbin/rmmod fp
/sbin/modprobe fp
/sbin/reboot
;;
*)
;;
esac

[Mithuk1]

Andy,

Looks like you already have the line in the right place.
If you haven't entered it before you may have loaded an image which already have crossepg integrated, there are a few about!

cheers,

M

[2685danny]

does this work on UNOFFICIAL DREAM ELITE V.133DV3 PHOENIX EDITION which is enigma2? as i cant access file manager on my box?
i think cross epg is in the dream elite server

press blue button > addons or plugins (its one of the coloured buttons eg blue or green)> EPG

its in there somewhere i have since flashed with DREAM ELITE and downloaded crossepg from the blue button .

hope this helps

[2685danny]

. However, my epg looks different to the one displayed on the pictures and I only get 2 days worth of epg. Will dig deeper, but am pretty certain it has to do with my xml file.

Thanks

are you using the "graphical EPG" there are a few EPG on a dream box "single EPG" "multi EPG"

there is also "merlin EPG" witch can be downloaded and installed as a plugin

or

it might be iam using a diffrent skin

[Mithuk1]

you could try /usr/crossepg/crossepg.configure

change the db_root=/media/thename of your USB device/crossepg

you will have to create the crossepg folder (the one in green)



db_root=/media/hdd/crossepg
lamedb=lamedb
providers=skyuk_astra2_28.2|krkadoni_skyuk_xepgdb
force_load_on_boot=0
download_daily_enabled=1
download_daily_hours=4
download_daily_minutes=0
download_daily_reboot=1
download_tune_enabled=1
download_manual_reboot=0
download_standby_enabled=0
last_full_download_timestamp=0
last_partial_download_timestamp=0
csv_import_enabled=0
show_plugin=1
show_extension=1



Hi Danny.

I'm using an icvs gp3 image. I have gp3 plugin and tunisiasat plugin installed.

I currently have my crossepg set to HDD. I have installed a 4gb usb pen in the back of my dm800 and it is recognised fine. my picons are installed on there and they work great.

However..... I do not get a usb option in the configure crossepg storage device.
I can also not find the /usr/crossepg/crossepg.configure as you suggest.

Any help appreciated.

cheeers,

M

[2685danny]

Hi Danny.

I'm using an icvs gp3 image. I have gp3 plugin and tunisiasat plugin installed.

I currently have my crossepg set to HDD. I have installed a 4gb usb pen in the back of my dm800 and it is recognised fine. my picons are installed on there and they work great.

However..... I do not get a usb option in the configure crossepg storage device.
I can also not find the /usr/crossepg/crossepg.configure as you suggest.

Any help appreciated.

cheeers,

M

this is the file path /usr/bin/enigma2.sh

you have to type or copy and paste this in it /usr/crossepg/crossepg.configure

before the line LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

make sure its the .sh enigma2 file

[andy211081]

it works and dont know how lol

Thanks for your replies though

[PAUL7331]

I dont have any option to change file to epg.dat

Where is this? Im using the new ramaHAMMER gemini/vix image by the way.

[Rizzy00]

does the line have to be added above LD....?
because i did this on gemini dm800hd and now my box only half boots and gets stuck.

Same here it ballsed up, what did you do ?

[darguewin]

hi iv been getting my self a dm 800 hd. i must say good bit of kit. still getting to know the box.
im getting harddrive installed by a friend, and im wondering about the epg. my box is running Newnigma2 v3.1.1 firmware i dont know if any one knows this image, some people say that this epg download is in the plug ins, dose any one know if its in this image and how to go about installing it. dose any setting need to be changed? last thing i want to do i break the box.
thanks for reading guys

[darguewin]

can any 1 help on this question????

hi iv been getting my self a dm 800 hd. i must say good bit of kit. still getting to know the box.
im getting harddrive installed by a friend, and im wondering about the epg. my box is running Newnigma2 v3.1.1 firmware i dont know if any one knows this image, some people say that this epg download is in the plug ins, dose any one know if its in this image and how to go about installing it. dose any setting need to be changed? last thing i want to do i break the box.
thanks for reading guys

[darguewin]

im running nwenigna 3.2.2 and iv followed the post down to a t to install crossepg and it just isnt working. it goes through all the search and downloading but it just wont bring up epg. any 1 help!!!!!!!!!!!

[2685danny]

can any 1 help on this question????

hi iv been getting my self a dm 800 hd. i must say good bit of kit. still getting to know the box.
im getting harddrive installed by a friend, and im wondering about the epg. my box is running Newnigma2 v3.1.1 firmware i dont know if any one knows this image, some people say that this epg download is in the plug ins, dose any one know if its in this image and how to go about installing it. dose any setting need to be changed? last thing i want to do i break the box.
thanks for reading guys

have you tryed

blue button > plugins

or

blue button > addons

there is other epg sources in the plugins

but cross epg works on most enigma2 images.

there are others avaliable on the plugin servers but the ones that save the epg data to your flash / ram can fill up your boxes flash / ram and cause the box to crash (the green reboot screen)

[darguewin]

i just cant get it working. iv tryd all the epg out of pluggins and wont work. i tryed to re flash but all i got was check tuner config. tuner was set up as it should be but just kept comming up with that. so just had to put this newnigma2 back on. my tuner is rev m.

[andiewill]

i just cant get it working. iv tryd all the epg out of pluggins and wont work. i tryed to re flash but all i got was check tuner config. tuner was set up as it should be but just kept comming up with that. so just had to put this newnigma2 back on. my tuner is rev m.

In newenigma the one to use is the xmltvimport located in the newnigma2 services from the blue button, once downloaded press blue button and select epgimport and set up your sources (blue button) and then manual (yellow button) and let it scan for your epg sources, it will then ask you to reboot and bobs your uncle.

But i found that there has been some issues with the rytec server and it was playing up a bit so i chnged to crossepg, but you will need to add that plug in from the Tspanle plugin, once the Tspanle is set up on your box you can find the crossepg in addons / plugsins, and it works / set's up more or less like the xmltvimport, and it is working a treat.

[ozski]

Hi I followed your guide and now my dreambox will not boot

I have a HD installed which was working fine

My enigma2.sh file reads the following :


#!/bin/sh

/usr/bin/showiframe /boot/backdrop.mvi

cd /home/root
LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

# enigma2 exit codes:
#
# 0 - restart enigma
# 1 - halt
# 2 - reboot
#
# >128 signal

ret=$?
case $ret in
1)
/sbin/halt
;;
2)
/sbin/reboot
;;
4)
/sbin/rmmod lcd
/usr/sbin/fpupgrade --upgrade 2>&1 | tee /home/root/fpupgrade.log
sleep 1;
/sbin/rmmod fp
/sbin/modprobe fp
/sbin/reboot
;;
*)
;;
esac


Can anyone help me please ?

[ozski]

Is there a way to factory restore before booting ? IT wont boot

Thanks

[andiewill]

It sounds like you may have to reflash ? when you turn the box off and turn it back on holding the button on the box at the same time, until an ip address comes up ? if so reflash the image again through the web interface, it takes a few minutes then run throigh the set up again.

[darguewin]

i had alot of problems with trying to get cross epg,

there is a post i made on http://www.digital-kaos.co.uk/forums/images/styles/digital/statusicon/thread_hot.gif best image for dm800 clone (http://www.digital-kaos.co.uk/forums/f39/best-image-dm800-clone-211037/)

it tells you how i got full 7 cross epg and what image i used.

its working perfect now.

if it helps press thanks

[owengrey]

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212345.jpg

YOU HAVE TO CHANGE THE CACHE FILE NAME TO EPG.DAT, otherwise it will not work.

im having trouble with the remote to change "gemini.epg.dat" to just "epg.dat". How do you delete characters using remote or is there a file i can edit which would make it easier.

box uses gemini 5.1

[owengrey]

I dont believe nobody knows how to do this,, come on spill the beans, ive tried every button on remote and all it does is add characters just cant seem to delete characters.......

[box2box999]

I'm able to delete using the < button to the left of the 0 key, this should work for you

[owengrey]

I'm able to delete using the < button to the left of the 0 key, this should work for you

Thanks for that, the buttons either side of the "< 0 >" brings up the hand with the slash through indicating this action is not valid. This is getting me down now as crossepg installed and this is the last bit to do and i cant edit the bloody filename = gemini.epg.dat

[tvbors]

Thanks for that, the buttons either side of the "< 0 >" brings up the hand with the slash through indicating this action is not valid. This is getting me down now as crossepg installed and this is the last bit to do and i cant edit the bloody filename = gemini.epg.dat
cant you just type over it ,i cant delete either but retyping works for me although im having a completely different problem

at this stage i dont have the 2nd option preferred lamedb

which plugins should be installed for this to work ?
graphmultiepg? if so i tried downloading it but it dosnt seem to install properly

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212200.jpg

[owengrey]

cant you just type over it ,i cant delete either but retyping works for me although im having a completely different problem

at this stage i dont have the 2nd option preferred lamedb

which plugins should be installed for this to work ?
graphmultiepg? if so i tried downloading it but it dosnt seem to install properly

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212200.jpg

Thanks for that, just typing over works for me to,easy when you know what to do i guess........
I dont have that option either "lamdb" it might be that option has been removed from the version that we have installed than the one from the first page. i have CrossEpg 0.6.2 svn 300 installed.
Crossepg seem to be working as i have data for many days, but its not displayed in the layout of the first page.

[tvbors]

right finally i have it downloading and saving the data for the 7 days epg . But when i go to info multi epg it still only has the options of whats on now and next .
I tried downloading graphmulti epg from the box(dm800) but it wont install, is there somewhere online i can download this from and ftp it to the tmp folder
sorry if this dosnt make much sense im a complete noob

[owengrey]

right finally i have it downloading and saving the data for the 7 days epg . But when i go to info multi epg it still only has the options of whats on now and next .
I tried downloading graphmulti epg from the box(dm800) but it wont install, is there somewhere online i can download this from and ftp it to the tmp folder
sorry if this dosnt make much sense im a complete noob

i press info>MultiEpg>then chose bouquet> then i have options Now-Next-More. Once i select more i can advance in time.
Would prefer a nice layout as in first page tho.

Oh and if i select buquet all my channels have a listing of whats on which i didnt have before.

Dont worry about being a noob, im one to and we all have to start somewhere.

[WOODWARD395]

Hi thanks for the epg help when i get to cross epg config i have no prefered lamedb listed is this a problem also i get to open tv providers but there are no sats listed the file is empty so nothing will download when i go into the blue panel i change the settings and save them reboot go back in and they have all changed back to the original settings.
you say change the cache file name to EPG.DAT do you mean in the settings or do i physicaly need to change the name if so what directory will i find it in.
thanks:help:

[cuculain]

help help please

tried doning the epg and omg it was going fine and
then i went and hit install cross epg and the whole dm seemed to start a full download and panic hit me turned off the
box and now it is not booting fully stuck on the second o in boot
what should I do ? never flashed or anything any and all advice please thanks guys

[willie1]

tryed this crossepg onto my dreambox 800hd rebooted the box now i cant get my box to work keeps rebooting tryed to reflash but will not reflash eny help please

[smirnoff_rules]

if your box has this sim and bootloader l would use this any day and the epg setting are easy http://www.digital-kaos.co.uk/forums/f39/dream-elite-v-133dv3-phoenix-edition-sim1-2-bl70-ocp-v2-163109/#post1173150

[kimbo123]

Tried this and don't know why it doesn't work.
Doesn't make any sense.

I've followed the instruction to a tee and everything seemed to work.

It downloads the epg data successfully, even populates the epg.dat file in /media/hdd/ since its about 6GB.

When I go to the blue menu -> settings -> epg everything is saved correctly and correctly points to the /media/hdd/epg.dat

However when I click menu->information->epg it says 8 events in 4 services and the multi epg has very basic information just on the channels i've previously browsed.

It still seems to be looking at the old epg settings even though i've now changed this.

fyi i'm using a cloned dm800hd gemini 2 with latest cams 2.2.1 and enigma 2 image installed.

[dacap]

A few people have had the problem where the hdd is not seen in crossepg configuration.Has anyone found a solution that does not involve removing the hdd?.My hdd works fine for recording so it seems to be mounted in rw, but crossepg does not see it.

[2685danny]

Hi thanks for the epg help when i get to cross epg config i have no prefered lamedb listed is this a problem also i get to open tv providers but there are no sats listed the file is empty so nothing will download when i go into the blue panel i change the settings and save them reboot go back in and they have all changed back to the original settings.
you say change the cache file name to EPG.DAT do you mean in the settings or do i physicaly need to change the name if so what directory will i find it in.
thanks:help:
on this screen click on file name and change it therehttp://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212345.jpg

[andy91]

Is this the simplist method to mount a usb for epg thanks.

Andy.

[andy91]

Charming just added this line

/usr/crossepg/crossepg_epgmove.sh
Now my box only boots halfway and is stuck:(

Andy,

[Scrote]

I am using dreamelite blackhole and have tried this on my db800 pvr.

I can't get that epg look on the tv. All I get when I try for single EPG is the listings in a straight line from top to bottom of the screen, but I don't get the epg grid system.

Any ideas anybody?

Regards

Scrote

[smoggy]

I am using dreamelite blackhole and have tried this on my db800 pvr.

I can't get that epg look on the tv. All I get when I try for single EPG is the listings in a straight line from top to bottom of the screen, but I don't get the epg grid system.

Any ideas anybody?

Regards

Scrote

you need to press 3 multi epg

[Scrote]

All I get if I do that is a list of things that are on hotbird. Nothing to do with astra

Very confusing

Regards

Scrote

[smoggy]

yours might be different on cross epg I was referring to mine which is rytec I thought it would be the same for you but maybe not

[mcdogg]

I can't get this to work I don't have the lamedb settings, could this be the problem?

[theworshiper]

where i can find setting for dm800se

[canford]

Can anyone get the EPG to properly work on the dm800se with the:newnigma2-dm800se-10-4-ramiMAHER.nfi....image.

[The fat man]

If you're having problems with the crossepg then it may be the version you are using because my mate had the same problem with the new version not working correctly and when he tried the version i'm using it worked straight away ,might just be coincidence but may be worth trying this version crossepg_0.6.2-svn-260-r0_mipsel.ipk.

[canford]

I will have a look at that tomorrow,but thanks for taking the time to try and help.

[canford]

I uninstalled crossepg and installed crossepg_0.6.2-svn-260-r0_mipsel.ipk. but it never worked, have managed to install merlins epg and got that working,although not as user friendly as crossepg, its working and will stay with it until i can get crossepg working.

[xXGJSXx]

Thanks for all the posts above. I have been having problems getting crossepg to work, hopefully I can sort this now.

[makaveli101]

great tutorial thanks i managed to get full epg for each channel... only problem is...

when i click 'multi EPG' (info>blue button) it doesn't load the multi epg... single epg works fine tho

any sugguestions?

[austenerife]

great tutorial thanks i managed to get full epg for each channel... only problem is...

when i click 'multi EPG' (info>blue button) it doesn't load the multi epg... single epg works fine tho

any sugguestions?

Hi, depending on your image you may have to enable multi epg,this is usually in the setup,customise menu.

Good Luck
Aus

[DMBoot]

Charming just added this line

/usr/crossepg/crossepg_epgmove.sh
Now my box only boots halfway and is stuck:(

Andy,

You edited it in wordpad or notepad?

That screws it up as it messes with the text.

Download the original enigma.sh from the link below abd it should boot again.

git.opendreambox.org Git - enigma2.git/tree (http://git.opendreambox.org/?p=enigma2.git;a=tree) in /usr/bin

Use notepad++ to edit it again.

[DMBoot]

In Gemini Blue panel --> settings --> EPG:
Make sure the top EPG options are all off. In the bottom panel use:
File cache ..... on
change the filename ...... epg.dat
location ..... /media/hdd
Automatically save ..... off.

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212345.jpg

YOU HAVE TO CHANGE THE CACHE FILE NAME TO EPG.DAT, otherwise it will not work.

Restart again



What do I press to get the the blue panel/menu above?

It isn't the blue button on my remote as it does something else.

[makaveli101]

great tutorial thanks i managed to get full epg for each channel... only problem is...

when i click 'multi EPG' (info>blue button) it doesn't load the multi epg... single epg works fine tho

any sugguestions?

Hi, depending on your image you may have to enable multi epg,this is usually in the setup,customise menu.

Good Luck
Aus

thanks for replying i'll have a look around & see what i can do

i'm using latest gemini 5.10 image

[kenny_c]

I followed all insturctions and it works, but when ever i restart my dreambox it now crashes, i have full epg working but the restart creates a log file when it crashes, any idea why? i can post log file is needed...

[AndySav]

Hiya everyone.

does this work with a black hole image? i think im running BH 0.12 if that helps?

my mate said he thinks it does and it can be installed via the control panel but im lost at how to do this because im not that clued up on these things.

cheers

[ukm]

Thanks for all info in this thread. I finally managed to get 7 day guide working.


Just need to work on getting a view similar to pic on 1st page

Mine isn't in the style of having the time line down it.

http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212458.jpg

Instead it looks like this

http://i1198.photobucket.com/albums/aa443/ukmike1972/screenshot.jpg

Not sure if its just my version of crossepg or perhaps a setting that needs changed.

I am running crossepg_0.62+git274+3e635ee-ro (Well thats what shows up in downloads via TSPanel )

Any help much appreciated

Mike

[smirnoff_rules]

wot image is it

[marcus1975]

hi

Great just go this working.

I am using Merlin 2 image

Best Regards

[ukm]

wot image is it




image is gemini

SIM2.01-dm800-SSL82-EN-S2-GP51

Mike

[ukm]

Any ideas anyone ??

[marcus1975]

Any ideas anyone ??

Hi what for ?

[ukm]

Apologies Marcus should have been more clear.
I was referring to my post at the top of this page (6)
How to get my epg view to look like (or similair ) to the
one on page 1

Mike

[andiewill]

Apologies Marcus should have been more clear.
I was referring to my post at the top of this page (6)
How to get my epg view to look like (or similair ) to the
one on page 1

Mike

On the Newnigma2 image it is blue button > graphical multi epg.

if you dont have that you may find it in the plugins download.

or you can download coolepg from the tspanle which does the same sort of view but colour codded.

[sparkyjenkins]

Im having difficulty with the addon downloader on DE 1.33DV3 Phoenix. Wont see any plugins on the catalogue. Any tops plz?

[pjmorie]

Hi all, I new to all this and recently setup a DM500s. The EPG on it only shows whats on now and next and was wondering is there a verison of this 'Cross EPG' that will work on the DM500s to give a 7-day guide?

[smirnoff_rules]

Hi all, I new to all this and recently setup a DM500s. The EPG on it only shows whats on now and next and was wondering is there a verison of this 'Cross EPG' that will work on the DM500s to give a 7-day guide?

http://www.digital-kaos.co.uk/forums/f214/commando_v14_5-dm500s-neutrino-release-260519/ this has 7 days .. u need to have a good read to see if u have the skills to install and setup

[pjmorie]

Thanks for the info 'smirnoff_rules', I might try it out and see how I get on with that image. I can always re-flash the box with my current 'Nabilo V8' image if I find it un-usable as there seems to be a lot of issues mentioned in the thread you gave.

[smirnoff_rules]

Thanks for the info 'smirnoff_rules', I might try it out and see how I get on with that image. I can always re-flash the box with my current 'Nabilo V8' image if I find it un-usable as there seems to be a lot of issues mentioned in the thread you gave.

u will get help on that thread m8 there the makers and leave feedback on there too

[barrox]

Hi Danny,

Now I've done everything to the letter by your guide apart from this bit below... I just can't find the settings to change the file name to epg.dat, I don't have access to EPG settings like shown below from my Blue panel... Where can I find them??

Thanks



In Gemini Blue panel --> settings --> EPG:
Make sure the top EPG options are all off. In the bottom panel use:
File cache ..... on
change the filename ...... epg.dat
location ..... /media/hdd
Automatically save ..... off.

http://www.digital-kaos.co.uk/forums/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 1024x768.http://i838.photobucket.com/albums/zz302/2685danny/2011-03-07212345.jpg

YOU HAVE TO CHANGE THE CACHE FILE NAME TO EPG.DAT, otherwise it will not work.

Restart again

now goto menu>setup >crossepg>download now.
it will run and retrive epg data

Restart again

[abufijli]

Cant seem to get it to work, I have followed all the steps, I download the epg data and it converts and does everything but then when i check there is no data available, Im using a DM500HD with newnigma2 image and Im a total noob so could be doing something wrong.... any advice?

[jahangir07]

will this wark on gm4.7

[darguewin]

my cross gpg has stopped working is every ones working ok? i download the epg and then no epg is on the chan list this used to work. but now nothing. any help would be good. thanks d

[smirnoff_rules]

go into crossepg setting and see if it's changed to internal flash if it has change to USB or hard drive and try again


Sent from my iPhone using Tapatalk

[john107]

brilliant guide.!!!! thanks so much for the info.......

[pavlosdem]

I have no local HDD on my DBOX but use a Network Share. Will this work?

[d2onk]

thanks for that, nice work....

[Manc-Red]

I get Cross to recoginise my HDD with media/hdd/crossepg edited in the /usr/crossepg/crossepg.configure file (db_root=/)

Weirdly when I try to update it after this the db_root=/ changes back to usr/crossepg/data & I have to go through the whole process again.

Anyone see what I could be doing wrong??

[dirtydonki]

I get Cross to recoginise my HDD with media/hdd/crossepg edited in the /usr/crossepg/crossepg.configure file (db_root=/)

Weirdly when I try to update it after this the db_root=/ changes back to usr/crossepg/data & I have to go through the whole process again.

Anyone see what I could be doing wrong??

Bit late but the answer is obvious. If Crossepg don't see the hdd then its not mounted or not mounted properly and I would suggest either removing it from the set up and rebooting to reconfig it ot delete your fstab file from /etc and rebooting and letting the box find the hdd anew.

Might even be down to the image you are using or something that didn't quite install when it was first flashed. So might be worth just starting over.

[jaffahull86]

:wavey: should this install via dcc

[reeco81]

Does this work on DM8000?

[digicon]

Does this work on DM8000?


CrossEPG will work on any Linux Enigma2 receiver

[Johnnnyuk]

I am having problems as it wont update. If I delete crossepg and then install it again it finds the downloaded file (extepgdata) on my usb. I think that I have a problem can someone point me in the right direction please. It is setup to look for the usb.

[mikk]

Was the new xepg completed and ported to older boxes like the dm 7025 ? Last I heard it was a work in progress. I tried to download xepg repack today but it just hung at parsing. The only one that works for me is open tv.

[digicon]

Was the new xepg completed and ported to older boxes like the dm 7025 ? Last I heard it was a work in progress. I tried to download xepg repack today but it just hung at parsing. The only one that works for me is open tv.

as far as i am aware the new version only got ported over to the newer OE2.0 images, Unless you can find a modified image

[MujaG]

Not working on my Vu+Solo2 BH image...neither epgimport..