OPCOM PIC dump?

[madaload]

Hi,

I'd like to ask where to get a PIC dump for the opcom interface (1.43 is it?) and also what is the latest software that can be safely used with it. The interface I want would be the older clone that works OK. I read here that there is a new version. A clone of the clone, that isn't working correctly.

To be quite honest I wouldn't mind buying the real op-com tool, so if you know a seller who is selling 100% genuine non-chinese opcoms, then please share the info. All I can find is the bloody clones that keep giving pple grief. Like no PIN12 communication or erased PIC.

thank you in advance

[mishu_b]

...
dump here
http://www.digital-kaos.co.uk/forums/f152/opcom-082010-a-161300/index10.html

any other information about your question/s you will find also there.

atb

[madaload]

...
dump here
http://www.digital-kaos.co.uk/forums/f152/opcom-082010-a-161300/index10.html

any other information about your question/s you will find also there.

atb
Thank you, I found the PIC dump there, but no link or a mention of a seller selling genuine OP-Com interfaces. From what is written in that thread I didn't understand if the clone will work with 2011 software or not and it also looks like there already is a 1.44 firmware that fixes some kind of an issue. And then, of course, there is this talk about OP-Com Advanced interface.

I'd really prefer to have the genuine interface, if possible the latest OP-Com Advanced. Any ideas where within the EU could I get one?

[mishu_b]

...
index_en (http://www.vezerdiagnosztika.hu/index_en.html)

all you need!

atb

[aryci]

good evening are new on this forum and I need the help of a connoisseur to modify a fw v1.44 to 1.39 am charged OPCOM OPCOM ****ed and that I am out
about this exchange appears to fail fvul

FTDI Serialnumber check ...
Number of interfaces: 1
Description: OP-COM USB V2
FTDI USB Serial: FTUMWDHI
FTDI-ChipID ChipID: 0xF22626D9
FTDI-ChipID Location ID: 0x31
A *** M Serial-Number (Calculated): HHINDLV6
A *** M FW Update Code (Calculated): 0ZGPL5C8
Opened Interface. Handle: 136448832
Communication closed. Handle: 136448832
Read ID from FW Image ...
ID from Firmwarefile: OI123456-1234
Read Firmware Version from FW Image ...
From Firmwarefile Version: 1.39

Interface Start Flashing ...

Number of interfaces: 1
Description: OP-COM USB V2
FTDI USB Serial: FTUMWDHI
FTDI-ChipID ChipID: 0xF22626D9
FTDI-ChipID Location ID: 0x31
A *** M Serial-Number (Calculated): HHINDLV6
A *** M FW Update Code (Calculated): 0ZGPL5C8
Opened Interface. Handle: 136448832
Baudrate 500kb / s
DataForm 8N1
Flowcontrol NONE
SetChars
Timeout 5 seconds
Set DTR and RTS Low = PIC Reset
low DTR
RTS low
Wait 1 second for reset
Set RTS High = PIC running
RTS high
Wait 100ms, it CAN bootloader home ...
RX Buffer clear ... OK

Bootloader Init send
*
**
Bootloder *** Answer: 0x3 0x0
****
Unknown ICP ***
**
*
flashing ...
BL answer:? Z?hler: 0000 Adresse High: 00 Low: 00 Checksum: FA
Bootloader abort.
Communication closed. Handle: 136448832

[speedy100]

...
dump here
http://www.digital-kaos.co.uk/forums/f152/opcom-082010-a-161300/index10.html

any other information about your question/s you will find also there.

atb


Thank You but how do You use this file? It is a .hex and not a .fw plus one .mod ?

B.R

[khaledrwan22]

Hi to all
Please where is dump file fot PIC ?:02.47-tranquillity:

[Gerd7]

Hi,
Does anyone have a hex file for fake PIC45k80 with K line wired to pin 15 instead pin 23?