MFD2DVD code

[Zibi70]

Hi
Please help me with code VW MFD2 DVD 1K0035198C.
Dump from FIS in attachment

Best Regards
Darek

[Zibi70]

Hi

Please help me with this navi.

Best Regards
Darek

[prusony]

Hi
Please help me with code VW MFD2 DVD 1K0035198C.
Dump from FIS in attachment

Best Regards
Darek

-= 1821 =-

[Zibi70]

Thank you I will try tommorow.

Best Regards
Darek

[sim1234]

[Hi Derek
been looking at all posts,this one in particular. i have a radio nav part number 1K0035198C and need the code for it,i can only find an ST95320 on the bottom board, the files attached but is this the correct one as i have seen posts staing that its a 24C32
many thanks simon

[aissa09]

Dump from FIS its a 24C32

[sim1234]

hi, thanks for the response.. i cannot find a 24c32 anywhere, i am looking on the bottom board and an ST95320 is sat there,am i looking in the right place? or is it somewhere else. BTW what is FIS?

[Argento7]

hi, thanks for the response.. i cannot find a 24c32 anywhere, i am looking on the bottom board and an ST95320 is sat there,am i looking in the right place? or is it somewhere else. BTW what is FIS?

Friend, please use "Search" button and you can learn @ fis. When you have your dump, post here! Good luck

[sim1234]

hi
noticed ur online..do you have a schematic of how to power the fis so i can read it as a 24c32..i seem to know now how it works
many thanks simon

[sim1234]

hi mate, after a lot of research i managed to read the 24c32 out of the FIS, its attached so could you help with the code please.

[prusony]

Try 0638 or 0678 .

[sim1234]

hi
thanks for your help. i'll try in morning and let you know. is it worth asking you how u calculated this from the dump?.i dont do these often as this is for a friend am just curious as i do alot of software editing
many thanks simon

[prusony]

From dump.

[fabi]

try -= 0816 =-

[sim1234]

hi fabi
tried the code you supplied and it worked so big thanks to you.. is it possible to share how u calculated from the dump the code as i have looked and cannot see it
many thanks again

[RW74]

need code for navi

[prusony]

need code for navi

-= 1184 =- :top:

[1974]

Hi Would someone damages? thank you

[prusony]

Hi Would someone damages? thank you

-= 1828 =- BR

[1974]

thank you very much for your help

[daveyboy100]

I have same navi, how do I get the unlock pin?

If I update the firmware will it ask for this pin?

[kuboa]

need code for navi

[prusony]

need code for navi
-= 1701 =- BR

[kuboa]

Thank you very much for your help

[HARYHARY]

Hi! I need code for dump.
Regerds.

[prusony]

Find CODE in PM....

[dextergsm]

Hello.
Please code for this dump.
Thanks

[momogsm]

hi
try 0787......................................

[dextergsm]

Thanks @momogsm (http://www.digital-kaos.co.uk/forums/member.php/90219-momogsm). Unit is in Locked and after 30 min unit power off and I can't enter code. Need to reset counter.

[momogsm]

hi
...............................................

[dextergsm]

Thanks @momogsm (http://www.digital-kaos.co.uk/forums/member.php/90219-momogsm). Counter is not reseted. I have unit locked after write dump.

[DJAPROG]

Hello.
Please code for this dump.
Thanks

[masterskay62]

Hello.
Please code for this dump.
Thanks

Hi. Your file looks bad, read again

[kappa1]

Code is 2194

[DJAPROG]

SORRY WRONG CODE;<br>post dump original locked .<br>

[smoggy]

SORRY WRONG CODE;<br>post dump original locked .<br>

dump is badly read....try again

did you try code with radio in the car or 3 plusses

[DJAPROG]

in car
no pinout for alimentation

[DJAPROG]

carprog is bad :2in1:

[DJAPROG]

SOMEONE HAS THE PINOUT TO READ THE 24C32?
AND THE PINOUT FOR POWER ALIMENTATION ON TABLE RADIO
CARPROG PROCEDURE IS NOT VERY CLEAR
JESPERE THAT THE DUMP IS NOT COROMPUT

[masterskay62]

SOMEONE HAS THE PINOUT TO READ THE 24C32?
AND THE PINOUT FOR POWER ALIMENTATION ON TABLE RADIO
CARPROG PROCEDURE IS NOT VERY CLEAR
JESPERE THAT THE DUMP IS NOT COROMPUT

After the request code to reduce the supply voltage radio 7.5 V

[DJAPROG]

I LET GO TO 7.5 V when I run the lectue to the carprog?
will you have the pinout of food?

[Arkadius]

Hello.
Please code for this dump.
Thanks

[golo]

Hi try 0340

[Arkadius]

Hi try 0340

wrong code :(

[golo]

wrong code :(

Programer diconected
3 X 12V Safe pin conected ?

[Arkadius]

sorry. Code ok. I forgot disconnent upa.

THX!!

[shooting]

wrong code :(

Code correct but also try 0403

wbr

[carmelasse]

HI.
Please help me wit code from MFD2 1K0035198C

[smoggy]

HI.
Please help me wit code from MFD2 1K0035198C


try code 0002

[carmelasse]

Code is OK. Thanks:)
I found other files at forums with identical code. Lines with code is the same.
Blaupunkt releases different serial numbers with similar codes or my unit is modified?