PDA

View Full Version : Volvo S80 DPF



emiliogsm
10th March, 2011, 10:15 AM
Hello can any try to remuve DPF from this dump volvo S80 EDC16c31
i am try with ECU safe , but no result .

emiliogsm
10th March, 2011, 10:14 PM
no one can help ?

grinovsky
10th March, 2011, 10:21 PM
this is your file dpf off

emiliogsm
10th March, 2011, 10:36 PM
thanks alot , will try tomorow !

emiliogsm
10th March, 2011, 10:41 PM
this is your file dpf off

its a ecusafe moded file with corrected checks , i am try with the same file .....have a dpf error + not good power

grinovsky
11th March, 2011, 07:32 AM
read dtc to know why

emiliogsm
13th March, 2011, 09:45 PM
diferencial pleasure sensor
i am try to disconect , the some result ..DTC and no power

grinovsky
13th March, 2011, 09:57 PM
try to add resistor 10kohm to differentiel sensor and your ecu will not detect that the dpf is removed and you will not lost power

bgcomp80
19th March, 2011, 11:40 PM
But if you turn off DPF via software you stil need the diferencial sensor conected ?

Nicko_d
14th May, 2011, 09:53 AM
Hi all!
I have another problem with S80'07 new body.

I did it twice (using ECUSAFE 2 and 1.9.3), simed that all perfect after reflash, but car start only 10-20 times, then blocked.. first time it blocked after 2 weeks

Checksum I did using BDM100 volvo EDC16c31, but autoidentification say, that something wrong and choose type ECU manual... Checksumm error not present.

Vida say error fuel actuator, but with original dump all OK...
only in BCM error incorrect software.

Can somebody calculate check summ with latest software from CMD BDM100 (maybe they add new tipe), or is enother problem???

emiliogsm
14th May, 2011, 10:04 AM
give me file

Nicko_d
16th May, 2011, 11:09 AM
Please, somebody help!!

emiliogsm
16th May, 2011, 12:00 PM
Please, somebody help!!

test with this file

Nicko_d
20th May, 2011, 08:51 AM
Thank You, the car run, but if I used ECUSafe was all Ok with DTC.
Now all detectors in DTC and sometimes TCM write not enought power...

Internal error incorrect software in CEM and in ECM, but car starts.

Can somebody help with working properly Dump?

Nicko_d
20th May, 2011, 03:15 PM
Did somebody else test it on latest S80 ???

Nicko_d
22nd June, 2011, 04:23 PM
People, can somebody help with Volvo cars DPF.

Ecusafe can't find any structure on car 08-

I tried, and DPF not found...