PDA

View Full Version : Mc Cormick XTX



highline
10th March, 2011, 03:32 PM
Hello
Have a problem with a EDC7UC31 from a Mc Cormick XTX. I think there is no BDM port. The lid is down, but board I do not get out. Does anyone have any idea?
highline

jovime
10th March, 2011, 09:36 PM
Hello
Have a problem with a EDC7UC31 from a Mc Cormick XTX. I think there is no BDM port. The lid is down, but board I do not get out. Does anyone have any idea?
highline

BDM ports are on the back of the board, the back is glued to the ECU box so the only way to take it out is to bend the PCB until it comes out.

Be careful because every 4 o 5 PCBs taken out gives problems some time after tuning, and this ECUs are kinda expensive (4000,00? or so).

Original KESSV2 can do it through OBD.

Regards.

mister car
31st August, 2014, 05:59 PM
hi, I did it with gallettol with OBD without problems