PDA

View Full Version : PSA Edc16c34 tunning maps



P2XA
11th March, 2011, 03:32 PM
Hi!Can anybody help tunning fuel maps?

P2XA
11th March, 2011, 05:26 PM
This is a dump :-

grinovsky
11th March, 2011, 08:16 PM
1C2BFA is map iq to NM conversion
1C2E42 is not driverwish and i did't know what is
x axy is for atmospherique presure(mbar) y=rpm,Z=?
i think it's limiter for somethink/presure atmospherique
for torque map you can edite as you like
if the 3 maps are near you can edit as 21x3
if the maps are far you must edit each map 21x1

P2XA
11th March, 2011, 11:48 PM
where are driverwish map situated?injection temp,rail limiter x,y,z-?

grinovsky
12th March, 2011, 08:33 AM
what's the engine?1.6,2.0...?

P2XA
12th March, 2011, 10:30 AM
1.6hdi,110cv

grinovsky
12th March, 2011, 06:52 PM
the driverwish maps start at 1C165E
there are succefuly 10 maps
maps for normal mode
maps for safe mode(the small maps)
and may be maps for sport mod if the car have this option

grinovsky
12th March, 2011, 06:53 PM
rail presure limiter at 1F165E

grinovsky
12th March, 2011, 06:55 PM
torque limiter
1CB712 19x1
1CB7D4 16x1

grinovsky
12th March, 2011, 06:58 PM
time injection maps :there are 6 maps succefely
the first start at 1E547A

grinovsky
12th March, 2011, 07:00 PM
rail presure maps:there are 4 maps succefely
the fist at 1F08A8

grinovsky
12th March, 2011, 07:03 PM
turbo presure maps 4 maps succefuly
the first 1EACA8

grinovsky
12th March, 2011, 07:06 PM
1EB7FC limiter turbo presure/atmospherique presure

grinovsky
12th March, 2011, 07:08 PM
and finaly the overboost maps
1E8AD0,1E919C,1E93E0

P2XA
13th March, 2011, 04:36 PM
1EBC40 is svbl isn't it?

P2XA
13th March, 2011, 04:37 PM
1F1F88,1F2132 what the map,start maps or other?

grinovsky
13th March, 2011, 05:19 PM
look at 1F2132

P2XA
13th March, 2011, 06:34 PM
it's a glow plug maps in ms?

grinovsky
13th March, 2011, 06:40 PM
it'e the idel map
idel(speed engine) fonct tempearature engine and atmospherique presure

clio_williams
13th March, 2011, 10:03 PM
it'e the idel map
idel(speed engine) fonct tempearature engine and atmospherique presure

do you serve file service for chiptuning? please send your msn to me if you do so

P2XA
15th March, 2011, 09:45 PM
where are glow plug map?

grinovsky
15th March, 2011, 10:11 PM
i don't think that it existe a map for glow plug!!!

P2XA
15th March, 2011, 10:30 PM
Sorry!I wanted to know where to find the parameters affecting the heating of glow plug...

grinovsky
16th March, 2011, 07:18 AM
timer relai

P2XA
20th March, 2011, 10:57 AM
1C2BFA,1CCB16,1CCD5A,1CCF9E are Torque to IQ converters?
x is rpm,y is torque?

P2XA
28th April, 2011, 10:45 PM
I tuned torque limiters,boost lim,turbo map,svbl but can't edit driverwish because I can not understand what and how to edit. I see a strange meaning and significance of the axes and go some values with a minus sign.

P2XA
3rd May, 2011, 08:40 AM
Anybody know factor,offset,precision for driverwish maps?

P2XA
3rd May, 2011, 08:47 AM
As I understand it there is no card in EDC16c34 pedal (ie, depending on amount of fuel supplied from the pedal and the RPM). In my case, there are maps of torque and a map of IQ to NM conversion, isn't it?

waldi1979
3rd May, 2011, 10:03 AM
Example 307 1.6 HDI ori+mod.
Pass PM.

P2XA
3rd May, 2011, 05:52 PM
This dump will work on the Citroen c5 9hz 1.6hdi EDC16c34?

P2XA
3rd May, 2011, 05:54 PM
I need help in search smoke limiter map and driverwish.

waldi1979
3rd May, 2011, 09:59 PM
It doesn't work, but You will look changes.

P2XA
6th May, 2011, 11:58 AM
Does anyone know how to look driverwis, smoke lim and torque map for this ECU?

gustawo_pl
6th May, 2011, 01:29 PM
Can I have pass please ?
Example 307 1.6 HDI ori+mod.
Pass PM.

P2XA
23rd May, 2011, 10:06 PM
Hi! Anybody can check my tune dump and say what's wrong?

P2XA
23rd May, 2011, 10:10 PM
Dumps ori+tune+map pack:

grinovsky
23rd May, 2011, 11:02 PM
rail presure map is wrong,you set max rail presure to 1920bars,why?
your mistake is that you start by chiptuning
the right way is to start by learning diagnostic's engines
if you can make diag and you find a probleme in commonrail engine you can do next step in chiptuning
but i don't think that you have the minimum knowledge of commonrail engine so it's impossible for you that you make a good tuned fille

P2XA
24th May, 2011, 08:22 AM
I installed the pressure ramps up to 1920 bar to increase savings.

P2XA
24th May, 2011, 08:42 AM
I read somewhere that this motor can raise the pressure to ramp up to 10% without affecting the pump.

P2XA
24th May, 2011, 09:16 AM
If I understand you will not need to raise the maximum pressure in the rail and the need to raise the pressure on low and medium speeds but then you have the same percentage decrease at the opening of the injectors?

grinovsky
24th May, 2011, 09:20 AM
as you like m8

P2XA
24th May, 2011, 09:23 AM
I'm not sure of his claims because the use of unverified information and for the same reason, ask for help. I really want to learn how to configure a good firmware. Thank you for your understanding ...