Belt Pretensioner Resistance Citroen C3 2004

[strbr]

Hi,
Can somebody tell me how much should I put resistance on seat belt tensioner? Airbag light is on Dashboard.
Car is Citroen C3 Pluriel - Temic 9656888580.

Regards

[drakov]

The same resistance as the good ones show? but about 2.2 ohms should be ok

[strbr]

The same resistance as the good ones show? but about 2.2 ohms should be ok

i tried 2.4 ohms but airbag light is still on...

[sapperjon]

The car after collision? If yes - that is necessary to replace the block SRS or to clear .

[strbr]

The car after collision? If yes - that is necessary to replace the block SRS or to clear .

collided but little, but airbags are fine... they didnt jump out...

[morfej]

Light will stay on till you reaplace or clear the airbag unit. It doesn't metter if you put resistor in place of belt tensioner.

[n-i-t-r-o-]

Put 2,4ohm and then you must find someone to cleare airbag unit...

[trico]

i think first step is to use lexia and scan your C3 , see what the problem is , it could be solved by simple coding ( not sure about the word , change parametre of some detector {put them on / off} ) then if necessary place resistor or clear dump..

[sherl645]

Fit a new one!! Also need to get your control unit sorted.

Ronan