PDA

View Full Version : BMW 530d 1999



gijsvm
13th March, 2011, 02:13 PM
Hello,

Can maybe someone tell me if the tacho universal can do the dash of a bmw 530 diesel from 1999 by obd ?
Or have i build the dash out ?

Thanks in advance...

antibisic
13th March, 2011, 05:20 PM
I think no but you should try because it has many versions

teerak2uk
13th March, 2011, 06:34 PM
Think maybe this one

Model 5 series E39 high ?IKE (instrument with 2 buttons) software 13

? Remove the cluster.
? Open it and look for the points on the board you can see on the picture.
? Remove the red paint that covers the contacts.
? Connect the cables as shown in the picture.
? Look for the silver chrystal and join its contacts.
? Connect the clip to Port 2.
? Select the menu BMW-5er/7er-E38/39 high ? IKE-Clip SW13
? The Tacho Universal shows you the old value If it is wrong, go to ?Show?. If the database is ok, you may continue. If not check the cables.
? Select the menu Adjust KM.
? Enter the new value.
? Verify the new value with OK.

gijsvm
13th March, 2011, 08:11 PM
What eeprom is in this car ?

teerak2uk
13th March, 2011, 08:29 PM
not sure is best to remove cluster and look at sticker for sw/hw version first

dashradio
13th March, 2011, 10:04 PM
Hello,

Can maybe someone tell me if the tacho universal can do the dash of a bmw 530 diesel from 1999 by obd ?
Or have i build the dash out ?

Thanks in advance...

Wouldn't it be easier just to plug into the OBD socket first to see if it goes via OBD

smartymarti
13th March, 2011, 10:16 PM
As Ron said it would have been faster tonplug in and try