PDA

View Full Version : Unlisted Celect Plus 3090528 - footprinted


joeseph666
14th March, 2011, 07:36 PM
Hi DK'ers,

I have a problem. I was trying to change some parameters, and the ecm wound up being footprinted. Ordinarily, that is no problem. But this ecm is not listed in the list for ecms on the left. Under Celect Plus there are 3 ecm part numbers... none of which show this number... 3090528.

Is there a way to re-calibrate this?

Thanks as always,

Joe
SaMirakle
14th March, 2011, 08:34 PM
Hi DK'ers,

I have a problem. I was trying to change some parameters, and the ecm wound up being footprinted. Ordinarily, that is no problem. But this ecm is not listed in the list for ecms on the left. Under Celect Plus there are 3 ecm part numbers... none of which show this number... 3090528.

Is there a way to re-calibrate this?

Thanks as always,

Joe

That part number is actually a 3096662. Just use any of the 3096662 calibrations and you should be fine :)