Fiat Grande Punto IAW 5SF3.M2

[tomaszcz]

Hi Friend.
How read X-Prog M st10f280 in this Ecu IAW 5SF?
Have someone with you connection ST10F280 to xprog?
I need immo off or virgin.

[tomaszcz]

Does anyone know how to connect?

[tomaszcz]

I read this Ecu ST10Flasher. Can if someone can help immo off or virgine file?

[bugajewski_pl]

Immo Decoder 2.0 has options for this ecu, You can find this soft on DK.

[tomaszcz]

Please help. How remove immo this file?

[carbyvw]

hi
you must convert hex to bin.
this is your file converted hex to bin.

[tomaszcz]

hi
you must convert hex to bin.
this is your file converted hex to bin.

What program you did it?

[carbyvw]

WinHex -convert intel hex-binary

[tomaszcz]

WinHex -convert intel hex-binary

How convert bin to hex,m8?
want to save this file to st10, but the error appears

[kasim_izmir]

I read this Ecu ST10Flasher. Can if someone can help immo off or virgine file?
Hi friend
I make virgin of 5sf ecus many times
see picture, make same is the like

BR
kasim

[tomaszcz]

Hi friend
I make virgin of 5sf ecus many times
see picture, make same is the like

BR
kasim

kasim_izmir Can you see my file whether it is virgin?

[janusz21]

tray kasim solution

[kasim_izmir]

tray kasim solution

Hi friend , my solution %100 without problem
i have make virgin a lot ecu
please compare, i read and write eeprom only via diagnose

WBR
kasim

[kasim_izmir]

kasim_izmir Can you see my file whether it is virgin?
Hello tomaszcz, Please can you share with me . How can i read and write flash of 5sf ecus ?
i need software ,interface ,details

WBR
kasim

[kasim_izmir]

kasim_izmir Can you see my file whether it is virgin?
Hello tomaszcz, Please can you share with me . How can i read and write flash of 5sf ecus ?
i need software ,interface ,details

WBR
kasim

[kasim_izmir]

kasim_izmir Can you see my file whether it is virgin?
Hello tomaszcz, Please can you share with me . How can i read and write flash of 5sf ecus ?
i need software ,interface ,details

WBR
kasim

[tomaszcz]

Hello tomaszcz, Please can you share with me . How can i read and write flash of 5sf ecus ?
i need software ,interface ,details

WBR
kasim

Hi. I use vag kkl interface and this soft work without problem.

[Mulatre]

Hi friend
I make virgin of 5sf ecus many times
see picture, make same is the like

BR
kasim

Hi, Kasim!

Can you help me to export flash from ST10Flasher tool format?

It must be 512kb.

Fiat 5SF.MH

[ninja123]

Does the 2x resistors for the boot strap need doing please, have a used ecu need to fit, but the car only plays up once a month, not sure if it is the ecu, so going to try it anyway
i have KWP2000+ and Galleto1260 and KKL leads

If fault proves to be elsewhere i can reset it on bench and reuse

ninja

[3abas27]

Does the 2x resistors for the boot strap need doing please, have a used ecu need to fit, but the car only plays up once a month, not sure if it is the ecu, so going to try it anyway
i have KWP2000+ and Galleto1260 and KKL leads

If fault proves to be elsewhere i can reset it on bench and reuse

ninja

for me i had problem with 5sf3 m1 no succes to read witth st 10 flasher get initmonitor failed

i use resistor 100 ohm i use flasher 2.02 the ecu is good where is the problem ?

[tomaszcz]

Hi, Guys after a long vacation. In a few days I will do a description of how to do it.

[kugglefischer]

hi tomaszcz....

we would like to get this process you use with the st10 flasher and kkl cable to read and write theeprom in these 5sf3 ecu's...
would be very helpful....

thanks alot
k

[multi666]

anyone test it???if that work we can do the same to iaw 59f!!!!!!!!!!!11

[kugglefischer]

i tied a few times no luck.....

possibly need a tool that reads eeproms.......

any updates?

[multi666]

tool??? what did you have in your mind???

[khayri]

:peaceful:5sf3 virgin avec fvdi abrites