View Full Version : PEUGEOT 206 EDC16C3 defective - IMMO OFF on new ECU?
uferi
20th March, 2011, 11:12 AM
Dear mates,
I meet a serious problem on a P206 1.4 HDI vehicle with EDC16C3 ECU: on the athmospheric pressure reading hole the water enters in the ECU and destroy the ECU (I cleaning the board, but I can't read the ECU via BDM, allways display communication error or power supply drop), I dismantle completly the ECU and found a lot of dirty on the SPI eeprom (95160). I desoldered the eeprom and the memory dump is fully 0! So, I can't clone the defective ECU...
The customer have another ECU, but I don't know what is the best solution to resolve the car.
If enough to remove the IMMO from the ECU dump, please remove it, if not enough please describe the procedure. I have acces only for DEC diadnostic equipment (is veri good in BSI coding for Peugeot, but I can't acces "original" PSA diagnostics).
Thanks in advance!
Best regards,
Feri
lupu_sandu
20th March, 2011, 01:40 PM
Your file off:
uferi
20th March, 2011, 02:54 PM
Hi Sandu,
thanks a lot, tomorow I will test on the car and report the result!
Best regards,
Feri
ricards99
20th March, 2011, 07:30 PM
hi, i have similar probleme with ecu 206 1.4 hdi edc16c3 0281010707
this is my original dump
please can someone help me with off
thanks
lupu_sandu
20th March, 2011, 11:43 PM
hi, i have similar probleme with ecu 206 1.4 hdi edc16c3 0281010707
this is my original dump
please can someone help me with off
thanks
Your dump off:
uferi
21st March, 2011, 12:09 PM
Your file off:
Dear Sandu,
the car now is working, thanks a lot for your help!
Best regards,
Feri
hamza338
21st March, 2011, 01:27 PM
hi lupu,
can you please help me with off for 307 1,4 hdi EDC16C3 47
0281 010 390 here is my ori
thanks in advance
eduardo74
21st March, 2011, 04:36 PM
The best way is to desolder / remove flash 29BL802CB and 95160 from destroyed ECU and solder it to new ECU.
Plug and play!
Did this several times. 100% working, of course ECU must be same (bosch numbers)
joubliss
21st March, 2011, 06:01 PM
hi lupu,
can you please help me with off for 307 1,4 hdi EDC16C3 47
0281 010 390 here is my ori
thanks in advance
Take this, its ur dump with immo off.
Job
electroniquearts
21st March, 2011, 11:20 PM
hi lupu,
can you please help me with off for 307 1,4 hdi EDC16C3 47
0281 010 390 here is my ori
thanks in advance
i have the same problem
rabbitepp
22nd March, 2011, 12:02 AM
your off file
pass pm but you must delete some message from your inbox
hamza338
23rd March, 2011, 10:39 AM
Take this, its ur dump with immo off.
Job
thanks meat, but degraded mode 3000/min. still looking for help thanks.
DAHDOC
11th April, 2011, 09:04 PM
Here i have a 206 ecu i need immo off please
jruibarroso
22nd April, 2011, 11:02 AM
Hi , can you immo-off my dump please ?
thank you
latino
22nd April, 2011, 12:03 PM
Hi , can you immo-off my dump please ?
thank you
there you go
autoelectrics
30th August, 2011, 03:15 PM
Hi, could I please have immo off for attached dump, (95160)
Thank you!
autoelectrics
19th September, 2011, 12:04 PM
anyone please?
thanks
lupu_sandu
19th September, 2011, 12:58 PM
Your file off:
Valrod
19th September, 2011, 05:55 PM
you can helpme??
i have a same problem.
Thanks ??
autoelectrics
26th September, 2011, 11:54 PM
Hi,
Need immo off for this dump please, thank you very much in advanced!
Thanks
radu_stoica78
30th September, 2011, 06:43 PM
Hello lupu sandu. Can you help me? i need immo off for citroen xara picaso 1.4 hdi 2003 EDC16C3 eeprom 95160. Thanks in advance.
lupu_sandu
1st October, 2011, 08:25 AM
Your file off:
andersonmaxi
8th October, 2011, 11:52 PM
hello i need immo off of this dump
i post dump of ecu and dump of bsi 95160 of bsi and 95160 of ecu
thx u for ur help
andersonmaxi
9th October, 2011, 10:50 PM
Hello lupu sandu
i need immo off for peugeot 206 hdi 1.4 2006
eeprom 95160.
Thanks in advance
scarymistake
10th October, 2011, 05:55 AM
hello i need immo off of this dump
i post dump of ecu and dump of bsi 95160 of bsi and 95160 of ecu
thx u for ur help
Try it and let us now
scarymistake
10th October, 2011, 05:57 AM
Hi,
Need immo off for this dump please, thank you very much in advanced!
Thanks
Try it and let us now
scarymistake
10th October, 2011, 06:02 AM
you can helpme??
i have a same problem.
Thanks ??Try it and let us now
Meat-Head
12th October, 2011, 09:06 PM
Hello lupu sandu
i need immo off for peugeot 206 hdi 1.4 2006
eeprom 95160.
Thanks in advance
gar?on (thats Frogench for 'boy') what worked on this in the end?
autoelectrics
12th October, 2011, 11:01 PM
Hi,
I couldn't test mine at the end because the car was taken to main dealer, they didn't wait for my solution :-( sorry about that,
Thanks
Meat-Head
12th October, 2011, 11:03 PM
car was taken to main dealer, they didn't wait for my solution :-( sorry about that,
You can sleep well at night knowing the dealer would have charged them for a new ECU, 2 KEys and a BSI
Meat
autoelectrics
12th October, 2011, 11:05 PM
That's true, up to the customer anyway they are the boss, ;-)
thomas76
16th December, 2011, 01:08 PM
Hi,
OFF for EDC16C3 206 1.4HDI 0 281 010 707
file ORI 95160 : 93777
Regards,
Thomas :embarassed:
cfgebel
16th December, 2011, 08:06 PM
[QUOTE=thomas76;1374157]Hi,
OFF for EDC16C3 206 1.4HDI 0 281 010 707
file ORI 95160 : 93777
Regards,
Thomas
fareed1302
24th January, 2012, 11:48 PM
i need to change my ecu because i think is out of order
this my dump can you put it off
ecu edc16C3 bosch 0 281 010 390
fareed1302
27th January, 2012, 03:25 PM
nobody ca help me
please
dybou
31st May, 2012, 10:42 PM
HELLO I NEED IMMO OFF FOR MY 206 HDI 1.4 YEAR 2002
EDC 16C3 DUMP 95C160 IS
cavignac
1st June, 2012, 12:05 AM
HELLO I NEED IMMO OFF FOR MY 206 HDI 1.4 YEAR 2002
EDC 16C3 DUMP 95C160 IS
you test the dump and gives an answer
thank you
dybou
2nd June, 2012, 10:47 AM
thnx frend but the car not star plz do you have a othre dump
joca0830
3rd July, 2012, 01:45 PM
Hello lupu sandu. Can you help me? i need immo off for peugeot 206 1.4 hdi 2003 EDC16C3 eeprom 95160.
Thanks .:idea:
joca0830
15th July, 2012, 08:34 PM
hi,
does anyone have it???
gyapi11
15th July, 2012, 09:01 PM
hi,
does anyone have it???
Hi. try this solution
joca0830
15th July, 2012, 09:37 PM
Hi. try this solution
hi,
already tested this solution, but the car is not worked.
thanks :wavey:
assitutto
25th July, 2012, 09:34 AM
hello, try this solution
antonnio_stef
22nd August, 2012, 02:01 PM
hy every one can nyone help with off file ?
citroen c3 1.4 hdi ecu boch 0 281 012 529
car is 2008 , eep 95160 . thnks to all
fedas
1st September, 2012, 10:25 PM
hy every one can you help me? i need immo off for peugeot 207 ecu eeprom 95160.
squard
4th September, 2012, 10:17 AM
i need password plz
fedas
9th September, 2012, 09:40 PM
anyone will not help me, immo off pls
cavignac
9th September, 2012, 10:58 PM
hy every one can nyone help with off file ?
citroen c3 1.4 hdi ecu boch 0 281 012 529
car is 2008 , eep 95160 . thnks to all
you file off
djamelEZS
9th September, 2012, 11:22 PM
but its better to use virgin dump and after using diag tool better solution than off
DavideTRD
10th September, 2012, 10:55 AM
HI all, please I need immo off this file. Thank you, best regards!
taseop
26th March, 2013, 05:15 PM
I need immo off for PEUGEOT 206HDI
ECU 0281010707
EPROM 95160
188327
BSI 95160
188328
THANKS
scarymistake
26th March, 2013, 07:22 PM
All look at this
http://www.digital-kaos.co.uk/forums/f175/edc16c34-immo-off-pin-code-288010/#post1668654
scarymistake
26th March, 2013, 07:28 PM
taseop (http://www.digital-kaos.co.uk/forums/members/35350-taseop/)
Tray it and let us now
taseop
27th March, 2013, 03:38 PM
I tested , but the car is not worked
scarymistake
27th March, 2013, 03:43 PM
I tested , but the car is not worked
have you read the car with diagbox ???
can you com in to the ecu
wy you need immo off
taseop
28th March, 2013, 07:45 AM
I changed the ECU, was destroyed .
taseop
27th April, 2013, 05:06 PM
i have a probleme with ecu 206 1.4 hdi edc16c3 0281010707
this is my original dump
195355
please can someone help me with off
thanks
insomnia2009
22nd November, 2017, 09:24 PM
i need immo off ecu edc16c3
0281011090
here is orig eeprom
kiszka
22nd November, 2017, 09:56 PM
..........
Adama kone
22nd November, 2017, 10:54 PM
trouve un otre ecu et le metre zero pour le programee avec pp2000 changement de calculateur
kiszka
22nd November, 2017, 11:45 PM
..........
jpatzan
21st January, 2018, 02:49 PM
hi, i need to dump this file, but it is asking for the passcode to open the zip file
jpatzan
21st January, 2018, 03:05 PM
can i have the pass to unlock the zip file please
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.