ECM CALIBRATION HELP

[bekamon]

Hi, I need to calibrate a ecm, but the calibration does not appear in the 2010 incal someone could help me

ecm part : 3408300
ecm serial : 7038674
ecm code : C4040100
engine : N14-370+
option DO : 1090
option SC : 10286
cpl : 2590
rpm : 1200
torque : 1450 lb/f

[dieselman77]

did you try the autodetect option ? sometimes that finds them and did you copy both sides of the disk correctly ? is it a celect of a celect +

[mondao]

can you put the engine serial number, it will be easier to find the calibration:hmmmm2:

[dieselman77]

It is under celect plus and there are alot of choices what are you looking for ? the highest it is showing is 425 hp and 1550ft lbs torque @ 1200

[bekamon]

I tried to auto-detect but it says that the calibration for that number of ecm is not available on this disc and it shows nothing more.
Engine number 12003534, this number right out of the ecm, I'm not sure if it matches the actual number that the truck is about 200 miles away, the ecm already changed it above

[dieselman77]

what disk are you using december ? feb ?

[bekamon]

december 2010

[dieselman77]

did you copy all files from the disks to calibration workspace ? the data esdn files are all the calibrations just copy the files and paste into the folder and say yes to copy all of them and is should work

[volvo lover]

Did you say you had changed the ECM if so is the ECM in a rom boot state, if so you will have to force in the correct calibration code using the CPL and hp required.
If your just trying to reclaibrate a replacement one then again once you have the calibration selection open for the CD drive click to list the list of calibrations open celect plus then the ECM part number 3408303 the it will list all the ones for the that ECM then usin the CPL critical parts list 2590 your find the one you want. Hope that helps.

[bekamon]

someone change the ECM before I review this truck and only work 15 days
I tried to recalibrate but I can not, because the calibration for that number of ECM did not appear in the inca, try to find one for the ECM and not let me

[mondao]

Hi, I need to calibrate a ecm, but the calibration does not appear in the 2010 incal someone could help me

ecm part : 3408300
ecm serial : 7038674
ecm code : C4040100
engine : N14-370+
option DO : 1090
option SC : 10286
cpl : 2590
rpm : 1200
torque : 1450 lb/f
Here are some calibrations for ecm 3408300
if you want to try

[Poptest]

Hi, I need to calibrate a ecm, but the calibration does not appear in the 2010 incal someone could help me

ecm part : 3408300
ecm serial : 7038674
ecm code : C4040100
engine : N14-370+
option DO : 1090
option SC : 10286
cpl : 2590
rpm : 1200
torque : 1450 lb/f

The calibration you are searching for is available under ECM 3408300. Use ECM Code C10682.10.

It is possible that Insite is not displaying all calibrations due to your Insite Tools settings. Go to Tools.....Calibration, then uncheck the following:
Show Active Calibrations
Show Installed Calibrations
Apply Custom Filter

Then click on Certification Codes, and transfer all Cert Codes from the left window to the right window.

All inactive, active, and superseded calibrations will be displayed. You can also right click on a calibration file to show you the old and latest calibration for your engine.

I hope this helps you.