Openbox Firmware 21/03/2011

[hooley]

Openbox Firmware 21/03/2011

On the basis of software dated ON 15th March, we upgrade the europe version software
a little, the new one optimize 480i! It can make the old TV's color better and works well!

EDIT::beheaded:
The attached file isnt working, try this one HDS2_CMT_11032101B6.abs (http://www.mediafire.com/file/s95cdylp21z4n2a/HDS2_CMT_11032101B6.abs)

[handyguy2002]

hi there

has this been test for reboot problems, as last update i tryed just kept rebooting the box after inserting cline@

[hooley]

I've put it on my box and to be honest I don't see any difference lol, then again you could say that about a lot if the firmwares. I suppose the only way of finding out about the rebooting issue is to try this one.

[swanside]

I've put it on my box and to be honest I don't see any difference lol, then again you could say that about a lot if the firmwares. I suppose the only way of finding out about the rebooting issue is to try this one.
It will still go into the reboot loop. This is just to make the 480i picture look better on older Tv's
The only way to avoid the reboot is to remove the channels that cause it or install a channel list with the channels already edited out.

[tojump]

i saw one another site where they have firmware they call N. American version, is that good to use?

[hooley]

i saw one another site where they have firmware they call N. American version, is that good to use?

Yes that should be fine. On your other thread there is a response from a person nearer to you, maybe question him about firmware to be sure

[sombel]

Openbox S9 has improved his version to a new receiver called BOLT HD



BOLT HD




High Definition Digital Satellite Recorder, Personal Video Recorder 1common interface


Mainboard: 396MHz MIPS CPU, 128MB DDR400 RAM, Memory Clock 198Mhz, 4MB Serial Flash, Single Tuner, DVB-S2 demodulator


Standard:DVB-S2 Standard (ETSI EN 302 307)


Decode mode: QPSK, 8PSK, 16APSK. MPEG-2/H.264 Hardware Decoding, Videotext Decoder.


Transport Stream: MPEG-2 ISO/IEC 13818 Transport Stream Specification


MPEG: MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.264/AVC HD, Supports MPEG4/MPEG2-HD/SD, DVB-S2/DVB-S.


Tuner voltage and format: Vertical +13.5V, Horizontal 18V, Current: MAX 500ma


CA&CI : Common Interface Slot*1,CA card reader Slot*1, 10/100Mbit Ethernet Interface


Aspect Ratio:Auto, 16:9 Pillar box, 4:3 Pan & Scan, 4:3 Letter Box.


F. MPEG:MPEG1 layer I, MPEG1 layer II, MPEG1 layer III, MPEG2, AC3. Multimedia Files Playback(by USB).


Screen Format:4:3/16:9 Auto,2Scarts. Automatic And Manual Channel Scan Options.


Audio frequency mode: Stereo/ LEFT/R-CH, HDMI Video & Audio Output (576i, 576p, 72op, 1080i


Digital Audio Output: S/PDIF By Coaxial And Optical, YcbCr Available.


Support DVR: DVR with USB HDD, Time shifting with USB HDD.PVR (External USB), EPG For7 Days Supported,


USB: USB2.0 Port*1, Upgrade software & Update Channel Database Through USB2.0 Port.


File system:FAT12, FAT16, FAT32, NTFS (only support first partition)


MIME: Support JPG, BMP, MP3, WMA


Language: Multi-lingual on Menu Screen Supported (English, French, Deutsch, Spanish, Italiano, Portuguese, Turkish, Russia, Polish, Arabic, Hungary.) Multi-lingual DVB Subtitle And Teletext supported, Teletext And Subtitle Out Through OSD.


A/V output interface:YPrPb, RCA with CVBS, SCART with CVBS, HDMI(HDCP),Left/Right analog audio, output(RCA), Digital audio output(SPDIF with coaxial or fiber).


Power consumption: 30W Max / 1W Standby (it***8217;s optional by customer***8217;s board)


Input:100V ~ 240V 50/60Hz


Input frequency range: 950MHz ~ 2150Mhz

Input signal: -25dBm ~ -65dBm


VERSION: HDS2-10-11-30:1323CMT

[presrelesse]

can u help me set up my openbox i am in the us