View Full Version : c70 volvo 2007
megaexplosionman
23rd March, 2011, 11:18 PM
HI all m8
Someone know wich chip is in C70 2007 DASH ?
I need to make only dash or some other ?
THANKS all :party:
smartymarti
23rd March, 2011, 11:32 PM
9s12 inside
Min2xx
24th March, 2011, 06:48 AM
HI all m8
Someone know wich chip is in C70 2007 DASH ?
I need to make only dash or some other ?
THANKS all :party:
If this dash 2gen, you must CEM do too, In cem IS 95320, and is encrypted, I can't find solution for this ( I must do S80 2007). May this pdf will help for you.
markony79
24th March, 2011, 08:10 AM
smartymarti is right
use this options like volvo v50 ,
its have 2 version
dont forget to errased the errors from dash
dash will be dead after erasing errors, but dont be panic
just take out batery for 1 min and it will work good
smartymarti
24th March, 2011, 08:15 AM
Normally most push button volvos from mid 2007 are cem but there's still a lot kicking around you don't need to I'd take the gamble andxsat dash inky in this one
Min2xx
24th March, 2011, 08:28 AM
Yesterday I make Volvo S80 2007 dash, and when car start, km go back :(
Wolfster
24th March, 2011, 10:20 AM
Yesterday I make Volvo S80 2007 dash, and when car start, km go back :(
S80 has vecam, behind glovebox.
Min2xx
24th March, 2011, 11:11 AM
S80 has vecam, behind glovebox.
I read this 95320, but what I need to do with it?
T72
24th March, 2011, 11:14 AM
I read this 95320, but what I need to do with it?
reprogram with expensive tool!
smartymarti
24th March, 2011, 12:45 PM
I read this 95320, but what I need to do with it?
post dump with mileage and mileage required ill do it for you
Min2xx
24th March, 2011, 02:16 PM
post dump with mileage and mileage required ill do it for you
Dash and 95320 dump, orig 280570 need 115000, thanks in advance :)
Wolfster
24th March, 2011, 05:00 PM
If you have vagprog, look in menu for this car, the procedure to actaully write the data to all modules is there in pic format.
Just putting 2 modified dumps back into car is not enough. (same as new freelander).
smartymarti
24th March, 2011, 09:06 PM
these can be done via obd if you have the correct machine
Min2xx
25th March, 2011, 08:02 AM
these can be done via obd if you have the correct machine
I known, but don't have tool :(
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.