View Full Version : Instructions for OP-Com update
e.t.
27th March, 2011, 05:12 PM
Hi,
can someone make a small guide that the OP-COM (clone) can upgrade to v1.44 firmware.
If possible with pictures.
Does that make the OP-COM Advance?
Thanks
Ashraf6119
27th March, 2011, 06:42 PM
Hi
The normal Op-Com and Op-Com Advance are two different things so, there is NO way by updating up your clone Op-Com to become Op-Com Advance.............
And if you are thinking of updating your Clone op-Com than you can update it from this site here which is tested and its working with clone once................
http://opcomforum.yolasite.com/software.php
Hope this helps........
Ash
mishu_b
27th March, 2011, 08:14 PM
...
just run the last Op-Com software and your tool will automatically update to fw 1.44.
atb
e.t.
28th March, 2011, 03:57 PM
What is the last software for OP-COM Clone?
mishu_b
29th March, 2011, 12:00 PM
...
according to the rules (new rules) you will not find here the last software for clones.
atb
e.t.
29th March, 2011, 06:31 PM
And whats the number?
mishu_b
30th March, 2011, 07:13 AM
OP-COM CHINA 08-2010 - one of the last Op-Com software cracked - usable with clones.
atb
Barm76
9th April, 2011, 12:09 PM
Update can be easy, if you will use this loader with FW1.43&1.44 :)
cristian2011
8th June, 2011, 07:06 PM
Hello! If I install latest version of op com, I will automatically updates the interface to version 1.44? Thanks to all
RMCtech
15th June, 2011, 03:29 AM
Yes, if you use latest soft it will update your clone to 1.44 but many functions will not work, and you will have an almost useless interface.
My advice is: Forget the v1.44 firmware, it don't work fine on clones.
The latest usable soft in clones is firmware 1.39 of China OP-Com 08-2010
mishu_b
15th June, 2011, 11:47 AM
...
correct
you do not need to update the interface because the last working software with clone tool is op-com 08-2010 which required fw.1.39
atb
mattydr67
30th June, 2011, 02:52 PM
Mates yes that's right like Mishu_b said that you don't need to upgrade to 1.44 just because Op-Com china clone 08/2010 need fw 1.39.
But I cannot tell you that Op-COm not works well with fw 1.44
There's not any difference between 1.39 and 1.44 if use all cracked version of Op-Com.
Good luck
phara0n
30th June, 2011, 09:11 PM
i have original. but cant find any serious website that speak about even official updates ive too much problems getting them who czn help?
meteor80
8th July, 2011, 08:25 AM
Confirm.
Version 1.44 is a piece of sh*t.
It doesn't work with same modules like Airbag or dash.
1.39 works fine.
mattydr67
8th July, 2011, 08:32 AM
May you explain or named the controlers that you couldn't connect?
I mean the models on which cars?
Becasue that's something new for me what you said. I have an upgraded 1.44 tool and I haven't no problems to connect on any moduls.
So I'm intrest to check by my self.
Thanks
Good luck
meteor80
8th July, 2011, 09:01 AM
I had Opel meriva 2006 to log in radio, but I couldn't read secutiry code from dash (older fv OK) and I couldn't reconfigure airbag module in Opel astra H 2008.
meteor80
8th July, 2011, 09:09 AM
In meriva there was possibility to connect with newest firmware of OP-COM but not possibility to read eeprom.
mattydr67
8th July, 2011, 09:22 AM
I see I will try by my self too
And you tell me that with 1.39 you could and with 1.44 you coudn't
Good luck
meteor80
8th July, 2011, 09:39 AM
Yes 1.39 :D fine 1.44 bad :hmmmm2:
spychu14
8th July, 2011, 09:53 AM
I've heard that op-com can repair airbag sensor.
Is it true ?? I've to fix it in astra H 2010.
mattydr67
8th July, 2011, 10:06 AM
Do you mean Crash Data?
Good luck
meteor80
8th July, 2011, 10:10 AM
Only some of modules You can do using opcom.
more You can find here:
http://opcomforum.yolasite.com
Don't forget to press magic button :D
raymos1501
24th July, 2011, 10:41 AM
There is no way to return the 1.44 firmware to 1.39? with opcomfut29b not working.
regards.
lupu_sandu
24th July, 2011, 11:18 AM
Only with programmer
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.