Nissan X-trail dpf remouval

[fredde]

Hello everyone.
I was woundering if someone has had this problem before me.
I have a Nissan X-trail 2.0 dci with bosch unit:0281013874/ edc16cp33.
I tried to program this unit to remove dpf, but after 60-100km mil light comes on. and DTC:P2002 is generated in ecu. This dtc as I understand is related to poor performance of dpf,

flash has been read and programed with bdm.
files processed whit ecusafe 2.0 and I have also tried volta.

Furthermore I had a similar problem with a R.megane sport 2.0dci 170hp, this car had the same type of ecu"edc16cp33"


This Nissan Its the second one Im having troubles with.
Has enyone had any luck with these or had the same problem?
Br.
Freddie:beheaded:

[bsv2001]

Hi
You must reduce dpf level I make it with Launch Diagun

[mazilus007]

have tried and ecusafe 1930?. I saw that change differently ecusafe2.0

[Bazil_mb]

Make 5 or 6 holes in Dpf (12 mm diameter).DPF sensor sees 50% clogged filter. In my opinion you have a problem with injector or EGR.

[znoki]

Finally did somebody solve the DPF problem?

I get stuck before the first step. :)
I tried to read my 0281013874 / EDC16cp33-6.7 (1037387003, 1037387237) ECU with clone 1255 BDM. The program couldn't identify the ECU, I had to choose it manually. I tried 006-Bosch EDC16 Renault/Nissan/Suzuki and 050-Bosch EDC16+ CP33 Renault protocols, but it could only read the eeprom.

Is it any way to remove DPF, or should I just try to keep reading the ECU?

Cheers!

[ecutuners]

Clone bdm cant read some newer ecus, try with magpro2 or an original tool.

[autobamm]

upload software here... maybe someone will help you
it is not so easy this EDC16CP33

[ecutuners]

Dpf off this file is no problem

[rideon]

Make 5 or 6 holes in Dpf (12 mm diameter).DPF sensor sees 50% clogged filter. In my opinion you have a problem with injector or EGR.
Never cross my mind......but think you're right, this should work....
What about MOT....???

[chris_e36_328]

Clone bdm cant read some newer ecus, try with magpro2 or an original tool.

Hi ECUtuners, I see people struggle with newer ecus, do you think a gen 555Pro is be a safe bet on old and new CP33s?

cheers

[ghostridersa]

Launch Diagun works

[AGS]

Hi ECUtuners, I see people struggle with newer ecus, do you think a gen 555Pro is be a safe bet on old and new CP33s?

cheers
555pro dangerous tool,my experience with this soft, cmd org,galletto2 and etc are safely.Better make bdm with most of the device to restore damaged ecu's.

[znoki]

How do you mean works?
Did you repair same problem by Diagun?
It's just a diagnostic tool, isn't it?


Launch Diagun works

[Serg00]

у вас хоть порасло

[Johnner]

Serg....please introduce yourself here : Introduce Yourself (http://www.digital-kaos.co.uk/forums/forumdisplay.php/2-Introduce-Yourself)

And in English !!