PDA

View Full Version : MPPS vS VW Crafter!



levisdj
29th March, 2011, 04:35 PM
With MPPS I'm trying to read the ECU of this 2006 2.5 TDI Vw Crafter!I tryied all the EDC1 drivers available under VW Crafter inside MPPS!I get : Ecu not found, everytime.Anyone that had experiences with this car?Ecu says : EDC16CP . P.S:Vag-Com also doesn't connect!Thanks

ipejasinovic
29th March, 2011, 04:49 PM
Try with Mercedes Sprinter drivers.

levisdj
29th March, 2011, 05:16 PM
I also saw VW Phaeton has EDC16CP driver, but it's 3.0TDI
tomorrow I'll try with MB Sprinter drivers and report!

chli1976
31st March, 2011, 11:56 AM
I read a Crafter with Byteshooter, but i must put a kable in Pin 72 for K-Line

tehnosoftex
31st March, 2011, 04:24 PM
Ive try with all ecu drivers from mpps and did not work. Mercedes ecu is some how different. Did not have eeprom and did have piezoelectric injectors. On crafter it has edc16cp34 ecu somehow like audi a6 but did has other protocols. Also will not communicate with vag com, only with vas

levisdj
2nd April, 2011, 12:01 PM
@ chli1976 (http://www.digital-kaos.co.uk/forums/members/57721-chli1976/) : Do you mind explainning the whole process.What cable, what pin? How to activate K-Line!
@ tehnosoftex (http://www.digital-kaos.co.uk/forums/members/87877-tehnosoftex/) So there is no way to read it with MPPS ? I know Galletto doesnt support EDC16Cp, neither does KWP2000+

chli1976
3rd April, 2011, 07:55 AM
Connect this pin with the k-Line from your flasher and read the file.

There is no cable to the OBD plug.

Or you upgrade a cable from PIN 72 ECU to Pin 7 OBD plug

levisdj
4th April, 2011, 02:54 AM
I don't use Byteshooter, I use MPPS

rocris
10th April, 2011, 08:45 PM
Ive try with all ecu drivers from mpps and did not work. Mercedes ecu is some how different. Did not have eeprom and did have piezoelectric injectors. On crafter it has edc16cp34 ecu somehow like audi a6 but did has other protocols. Also will not communicate with vag com, only with vas


Ross-Tech: VAG-COM: Current Beta (http://www.ross-tech.com/vcds/download/beta/current.html)


Beta 11.2 includes the following and improvements:
Communications with all control modules in VW Crafter ("LT3") light trucks.

levisdj
11th April, 2011, 08:03 AM
Does it work with Vag-Com 409.1 interface ? [Blue Cable]

barti122
13th April, 2011, 01:39 PM
diagnosa crafter only kts

gezame
15th April, 2011, 12:37 AM
diagnosa crafter only kts

Hi
diagnostic crafter vas-pc, read-write file obd, cmdflash original.
Regards.

gezame
15th April, 2011, 12:39 AM
Does it work with Vag-Com 409.1 interface ? [Blue Cable]

Hi,
Not, sure not.
Only vas-pc, or vag-com original (version beta).
Regards.

krzys
25th April, 2011, 05:19 PM
Audi is adress ECU 01, Crafter is 91

neostrada
25th April, 2011, 06:29 PM
VCDS works with Crafter

dataman
29th April, 2011, 09:48 AM
ecu read /write only by k line, need to pull blanking pin from ecu plug and make connection with test probe.Turn ignition on wait 12minutes you will hear relay "click" you can now read and write ecu.

There is no solution to read this by CAN-BUS. Only DTC and identifcation can be made with CAN-BUS.