307 HDI SID801

[CIRCUIT.FR]

HI

I need immo off 307 HDI
SID801
SW9646449280
HW9644302380

Two file 8 and 18 bytes:

Could modif file?
I need cut pin immo from ecu? (what n??)

THX

[rossoelab]

HI

I need immo off 307 HDI
SID801
SW9646449280
HW9644302380

Two file 8 and 18 bytes:

Could modif file?
I need cut pin immo from ecu? (what n??)

THX

here file immo off

[CIRCUIT.FR]

Thanks I try tomorrow.

It is 8 or 16 bytes?
I need cut immo line?

[rossoelab]

the software does not tell me that you must cut line immo
I'm sorry I do not know other information

[Satmanek]

work without cut immo line, only original eeprom file with change few byte. this car. Config ecu. Wrong off on file from Rossoelab.

[CIRCUIT.FR]

work without cut immo line, only original eeprom file with change few byte. this car. Config ecu. Wrong off on file from Rossoelab.

Could you explain with more details or give me modif file.

Thanks

[joubliss]

take this, already tester work 100% but u have to configure car with diagnostic tool like pps2000.
ps: car start but degrader to 3000tr/min, when u configure it, it will surpass 3000tr/min.

Job

[CIRCUIT.FR]

take this, already tester work 100% but u have to configure car with diagnostic tool like pps2000.
ps: car start but degrader to 3000tr/min, when u configure it, it will surpass 3000tr/min.

Job

In fact, I need to put engine in other CAR (BUGGY).
So I haven't BSI in this CAR.
I can reprog without BSI?
Your file it is virgin?

[joubliss]

its virgin with immo off. no need key just put it in the ecu and start.

[CIRCUIT.FR]

its virgin with immo off. no need key just put it in the ecu and start.

ok

But i need config what with PPS2000?

[joubliss]

ok

But i need config what with PPS2000?

u have to configure ecu with pps2000. u have to enter to ECU engine - Adaptation and configure it. all will be Ok

Job

[CIRCUIT.FR]

u have to configure ecu with pps2000. u have to enter to ECU engine - Adaptation and configure it. all will be Ok

Job

THANKS
Sorry I reprog it in 8 or 18 Bytes?

I try this and post result.

This file is good for all SID801?

[racin-snake]

In fact, I need to put engine in other CAR (BUGGY).
So I haven't BSI in this CAR.
I can reprog without BSI?
Your file it is virgin?

if this ecu is going into something without a bsi
then you will not be wiring up the bsi ?
then you do not need to cut anything

[basset-bo]

Thanks Thanks 307 hdi sid801 immo off.zip (http://www.digital-kaos.co.uk/forums/attachments/f178/56636d1301513173-307-hdi-sid801-307-hdi-sid801-immo-off.zip)

[CIRCUIT.FR]

u have to configure ecu with pps2000. u have to enter to ECU engine - Adaptation and configure it. all will be Ok

Job

I think it is in 16 Bytes, exact?

[CIRCUIT.FR]

I test it, the car start well.
I reprog it with PP2000 and post result.

[CIRCUIT.FR]

HI

I need immo off VITARA year 2000 with SID801.
Could you modif me file?
Here two dump 8 and 18 Bts:

I must cut immo line?

[CIRCUIT.FR]

SOLVED with immocleaner