PDA

View Full Version : Need PIN from dump Opel ME1.5.5



oem
31st March, 2011, 02:43 PM
Hello, i need Security Code PIN from dump Opel Corsa Z12XE ME1.5.5. Dump is in attachments.

darrenhyland
31st March, 2011, 04:21 PM
is this corsa c?....if it is then use opcom and read from eeprom in instruments cluster...where is this dump from?

lupu_sandu
1st April, 2011, 12:05 AM
This is flash from ECU m8.
No immo data stored in flash, only in eeprom

oem
1st April, 2011, 09:18 AM
This ecu not have eeprom. :2in1: I must change ecu because old ecu is damaged. He have problem with throttle control. If i reflash new ecu with software from old can i reprogram new ecu with opcom on the car?

DiagService
1st April, 2011, 10:23 PM
You must reset new ECU before you instal on you car, when you have immo box from you new ECU read Motorola send Dump and you have Login code, when you have Login code then you can reset ECU, when you have Reset ECU instal on you Car, you can program with op-com go immobilizer program, then BCM program and Instrument program and you can Start Motor.If you have problems with the BCM program Download minus the batteries, after a couple minutes back and then the program.

oem
2nd April, 2011, 08:03 AM
OK, Thank you :)

zecozc
3rd April, 2011, 11:11 PM
my vin W0L0TGF6915212269
opel astra please need pin

tomaszcz
4th April, 2011, 08:38 AM
my vin W0L0TGF6915212269
opel astra please need pin

Not impossible Vin to Pin with Opel

Shmortz
8th April, 2011, 05:52 PM
try to get pin from ecu with gold opel soft if you have galetto interface